Zone-Ching Lin¹, Ying-Chih Hsu¹

CMC-Computers, Materials & Continua, Vol.25, No.1, pp. 75-106, 2011, DOI:10.3970/cmc.2011.025.075

Abstract The three-dimensional quasi-steady molecular statics nanocutting model is used by this paper to carry out simulation analysis of nanocutting of sapphire in order to explore the effects of conical tools with different tip radii of probe and straight-line cutting at different cutting depths, on cutting force. Meanwhile, this paper uses a cutting tool of atomic force microscopy (AFM) with a probe tip similar to a semisphere to conduct nanocutting experiment of sapphire substrate. Furthermore, from the experimental results of nanocutting sapphire substrate, this paper innovatively proposes the theoretical model and equation that the specific down… More >

Zhi Yuan Cui¹, Jiu Hui Wu¹, Di Chen Li¹

CMES-Computer Modeling in Engineering & Sciences, Vol.71, No.2, pp. 149-156, 2011, DOI:10.3970/cmes.2011.071.149

Abstract A quantitative rule of the vibrated granular media's energy dissipation is obtained by adopting the turbulence theory in this letter. Our results show that, similar to the power spectrum in fully developed fluid turbulence as described in Kolmogorov's theory, the power spectrum of vibrated granular media also exhibits a k - 5 / 3 (k is the wave number) power which characterizes the local isotropic flow. What's more, the mean energy dissipation rate in vibrated granular media rises with the increase of particle size and volume ratio. The theoretical results in this letter can be More >

Surkay D. Akbarov^1,2, Arzu Turan³

CMC-Computers, Materials & Continua, Vol.24, No.3, pp. 257-270, 2011, DOI:10.3970/cmc.2011.024.257

Abstract The influence of the initial finite stretching or compressing of the strip containing a single crack on the Energy Release Rate (ERR) and on the SIF of mode I at the crack tips is studied by the use of the Three-Dimensional Linearized Theory of Elasticity. It is assumed that the edges of the crack are parallel to the face planes of the strip and the ends of the strip are simply supported. The initial finite strain state arises by the uniformly distributed normal forces acting at the ends of the strip. The additional normal forces More >

Tian-Zhong Wang¹, You-He Zhou^1,2

CMC-Computers, Materials & Continua, Vol.21, No.1, pp. 41-64, 2011, DOI:10.3970/cmc.2011.021.041

Abstract Based on the thermodynamic theory and the postulates of Jiles and Atherton, a general coupled magnetic-elastic-thermal free-energy model with hysteretic nonlinearity is established for Terfenol-D rods, in which the effect of Weiss molecular field is incorporated. The quantitative agreement between numerical simulation results predicted by the free-energy model and existing experimental data confirms the validity and reliability of the obtained nonlinear theoretical model, and indicates that the free-energy model can accurately capture the nonlinear hysteresis characteristic of Terfenol-D. Meanwhile, the free-energy model is employed to investigate the influences of mechanical stress and the temperature on… More >

G. Prakash Narayan^a, Karan H. Mistry^a, Mostafa H. Sharqawy^a, Syed M. Zubair^b, John H. Lienhard V^a,†

Frontiers in Heat and Mass Transfer, Vol.1, No.2, pp. 1-13, 2010, DOI:10.5098/hmt.v1.2.3001

Abstract Simultaneous heat and mass exchange devices such as cooling towers, humidifiers and dehumidifiers are widely used in the power generation, desalination, air conditioning, and refrigeration industries. For design and rating of these components it is useful to define their performance by an effectiveness. In this paper, several different effectiveness definitions that have been used in literature are critically reviewed and an energy based effectiveness which can be applied to all types of heat and mass exchangers is defined. The validity and the limitations of the various effectiveness definitions are demonstrated by way of several examples More >

Qing-fen Li¹, Li Zhu¹, Shi-fan Zhu¹, F-G Buchholz¹

Structural Durability & Health Monitoring, Vol.6, No.3&4, pp. 273-288, 2010, DOI:10.3970/sdhm.2010.006.273

Abstract The fracture behavior in all fracture mode (AFM)-specimen with a single edged crack under different loading conditions is investigated by the aid of the commercial ANSYS code. The separated strain energy release rates (SERRs) along the crack front are calculated by the modified virtual crack closure integral (MVCCI)-method. It is shown that the computational results of the AFM-specimen are in good agreement with some available findings for pure mode I, mode II, mode III, and mixed-mode I+III loading conditions. Furthermore, the crack growth problems under complex mixed-mode II+III loading condition by using the AFM-specimen, are More >

A. Aimi¹, M. Diligenti¹, S. Panizzi¹

CMES-Computer Modeling in Engineering & Sciences, Vol.58, No.2, pp. 185-220, 2010, DOI:10.3970/cmes.2010.058.185

Abstract In this paper we consider 2D wave propagation Neumann exterior problems reformulated in terms of a hypersingular boundary integral equation with retarded potential. Starting from a natural energy identity satisfied by the solution of the differential problem, the related integral equation is set in a suitable space-time weak form. Then, a theoretical analysis of the introduced formulation is proposed, pointing out the novelties with respect to existing literature results. At last, various numerical simulations will be presented and discussed, showing accuracy and stability of the space-time Galerkin boundary element method applied to the energetic weak More >

I.A. Miklashevich¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.15, No.4, pp. 145-152, 2010, DOI:10.3970/icces.2010.015.145

Abstract The simple analytical model for the energy flux by the earthquake is proposed. The energy flux can be evaluated through the Umov-Pointing vector by the rupture propagation in media. Discontinuity of vector components is found. This discontinuity cause the change of an energy flow direction and localization of the energy field. More >

B.K.Raghu Prasad¹, Rabindra Kumar Saha¹, A.R.Gopalakrishnan¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.14, No.3, pp. 65-84, 2010, DOI:10.3970/icces.2010.014.065

Abstract Several different models have been proposed to characterize mode-I crack propagation in concrete. The fictitious crack model proposed by Hillerborg et al. and the blunt crack band theory developed by Bazant & Oh are particularly well suited for a finite element analysis. The two-parameter fracture model proposed by Jenq & Shah is found to be applicable only for beams with s/w=4, where s=span & w=depth of the beam. The general applicability of the model for other testing configurations is not published. In the present study an experimental verification of a one-parameter model based on fundamental… More >

M. X. Xie¹, H. L. Chen¹, J. H. Wu¹, F. G. Sun¹

CMES-Computer Modeling in Engineering & Sciences, Vol.61, No.1, pp. 1-22, 2010, DOI:10.3970/cmes.2010.061.001

Abstract Energy finite element method (EFEM) is a new method to solve high-frequency structural-acoustic coupling problems, but its use has been limited to solving simple structures such as rods, beams, plates and combined structures. In this paper, the high-frequency structural-acoustic coupling characteristics of an aircraft cabin are simulated by regarding the shell as a number of flat shell elements connected with a certain angle in EFEM. Two tests validated the method employed in this paper. First, the structural response analysis of a cylinder was calculated in two ways: dividing the shell by axis-symmetric shells after deriving… More >