Yechun Xin¹, Xinyuan Zhao¹, Dong Ding², Shuyu Chen², Chuanjie Wang², Tuo Wang^1,*

Energy Engineering, Vol.123, No.1, 2026, DOI:10.32604/ee.2025.069748 - 27 December 2025

Abstract To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current (HVDC) links and multi-infeed DC systems in load-center regions, this paper proposes a hybrid modular multilevel converter–capacitor-commutated line-commutated converter (MMC-CLCC) HVDC transmission system and its corresponding control strategy. First, the system topology is constructed, and a submodule configuration method for the MMC—combining full-bridge submodules (FBSMs) and half-bridge submodules (HBSMs)—is proposed to enable direct power flow reversal. Second, a hierarchical control strategy is introduced, including MMC voltage control, CLCC current control, and a coordination mechanism, along with the derivation of… More >

Xue Zhang¹, Jie Chen^2,*, Zhihui Zhang³, Dewei Zhang³, Yuejiao Ming³, Xinde Zhang³

Energy Engineering, Vol.123, No.1, 2026, DOI:10.32604/ee.2025.069487 - 27 December 2025

Abstract The integration of wind power and natural gas for hydrogen production forms a Green and Blue Hydrogen Integrated Energy System (GBH-IES), which is a promising cogeneration approach characterized by multi-energy complementarity, flexible dispatch, and efficient utilization. This system can meet the demands for electricity, heat, and hydrogen while demonstrating significant performance in energy supply, energy conversion, economy, and environment (4E). To evaluate the GBH-IES system effectively, a comprehensive performance evaluation index system was constructed from the 4E dimensions. The fuzzy DEMATEL method was used to quantify the causal relationships between indicators, establishing a scientific input-output… More > Graphic Abstract

Marija Macenić, Tomislav Kurevija^*, Tin Herbst

Energy Engineering, Vol.123, No.1, 2026, DOI:10.32604/ee.2025.067067 - 27 December 2025

Abstract The increased interest in geothermal energy is evident, along with the exploitation of traditional hydrothermal systems, in the growing research and projects developing around the reuse of already-drilled oil, gas, and exploration wells. The Republic of Croatia has around 4000 wells, however, due to a long period since most of these wells were drilled and completed, there is uncertainty about how many are available for retrofitting as deep-borehole heat exchangers. Nevertheless, as hydrocarbon production decreases, it is expected that the number of wells available for the revitalization and exploitation of geothermal energy will increase. The… More >

Hong Zhao, Hongbin Chen^*, Zhihui Guo, Ling Zhan, Shichao Li

CMC-Computers, Materials & Continua, Vol.86, No.2, pp. 1-25, 2026, DOI:10.32604/cmc.2025.072776 - 09 December 2025

Abstract UAV-mounted intelligent reflecting surface (IRS) helps address the line-of-sight (LoS) blockage between sensor nodes (SNs) and the fusion center (FC) in Internet of Things (IoT). This paper considers an IoT assisted by multiple UAVs-mounted IRS (U-IRS), where the data from ground SNs are transmitted to the FC. In practice, energy efficiency (EE) and mission completion time are crucial metrics for evaluating system performance and operational costs. Recognizing their importance during data collection, we formulate a multi-objective optimization problem to maximize EE and minimize total mission completion time simultaneously. To characterize this tradeoff while considering optimization… More >

Malvinder Singh Bali¹, Weiwei Jiang^2,*, Saurav Verma³, Kanwalpreet Kour⁴, Ashwini Rao³

CMC-Computers, Materials & Continua, Vol.86, No.2, pp. 1-19, 2026, DOI:10.32604/cmc.2025.070866 - 09 December 2025

Abstract In recent years, Blockchain Technology has become a paradigm shift, providing Transparent, Secure, and Decentralized platforms for diverse applications, ranging from Cryptocurrency to supply chain management. Nevertheless, the optimization of blockchain networks remains a critical challenge due to persistent issues such as latency, scalability, and energy consumption. This study proposes an innovative approach to Blockchain network optimization, drawing inspiration from principles of biological evolution and natural selection through evolutionary algorithms. Specifically, we explore the application of genetic algorithms, particle swarm optimization, and related evolutionary techniques to enhance the performance of blockchain networks. The proposed methodologies More >

Zeeshan Ali Haider¹, Inam Ullah^2,*, Ahmad Abu Shareha³, Rashid Nasimov⁴, Sufyan Ali Memon^5,*

CMC-Computers, Materials & Continua, Vol.86, No.1, pp. 1-16, 2026, DOI:10.32604/cmc.2025.071042 - 10 November 2025

Abstract The advent of sixth-generation (6G) networks introduces unprecedented challenges in achieving seamless connectivity, ultra-low latency, and efficient resource management in highly dynamic environments. Although fifth-generation (5G) networks transformed mobile broadband and machine-type communications at massive scales, their properties of scaling, interference management, and latency remain a limitation in dense high mobility settings. To overcome these limitations, artificial intelligence (AI) and unmanned aerial vehicles (UAVs) have emerged as potential solutions to develop versatile, dynamic, and energy-efficient communication systems. The study proposes an AI-based UAV architecture that utilizes cooperative reinforcement learning (CoRL) to manage an autonomous network.… More >

Longfei Gao^*, Weidong Wang, Dieyun Ke

CMC-Computers, Materials & Continua, Vol.86, No.1, pp. 1-15, 2026, DOI:10.32604/cmc.2025.068873 - 10 November 2025

Abstract At present, energy consumption is one of the main bottlenecks in autonomous mobile robot development. To address the challenge of high energy consumption in path planning for autonomous mobile robots navigating unknown and complex environments, this paper proposes an Attention-Enhanced Dueling Deep Q-Network (AD-Dueling DQN), which integrates a multi-head attention mechanism and a prioritized experience replay strategy into a Dueling-DQN reinforcement learning framework. A multi-objective reward function, centered on energy efficiency, is designed to comprehensively consider path length, terrain slope, motion smoothness, and obstacle avoidance, enabling optimal low-energy trajectory generation in 3D space from the… More >

Huijing Gao, Yisen Liu, Qianbing Tan, Kui Wang^*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.34, No.1, pp. 1-1, 2025, DOI:10.32604/icces.2025.012320

Abstract Assembled structures attracted increasing attention due to their ultimate flexibility, wide design space, manufacturing and transporting conveniences. In this study, a novel assembled multi-cell structure was proposed to achieve tunable energy absorption characteristics. The quasi-static compression experiments demonstrated that the crashworthiness of the assembled multi-cell structure could be effectively and rapidly tailored by varying the number and material of cells. Furthermore, to enhance the mechanical interlocking capability and energy absorption performance of existing assembled structures, three connection joints were further proposed. Tensile tests were conducted to investigate their mechanical properties, and the results revealed that… More >

Yan Zeng¹, Boyuan Guan¹, Zhenan Zhao², Weizhu Yang¹, Shouyi Sun¹, Lei Li^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.34, No.1, pp. 1-1, 2025, DOI:10.32604/icces.2025.010596

Abstract Ni-based single-crystal superalloys (SX) turbine blades of aeroengines are inevitably damaged during using. Therefore, it is of great significance for commercial aeroengines with high economic requirements to repair SX turbine blades reasonably and continue to realize their value by Laser-Directed energy deposition (L-DED). The repairing of SX must maintain the epitaxial growth of single-crystal, so the microstructure adjustment and the inhibition of stray grains are important for the preparation of L-DED SX.
In this work, the single channel monolayer and single channel five-layers SX have been prepared by L-DED. Based on the columnar transition to… More >

S. H. Fan^1,*, Y. S. Song¹, H. J. Hou¹, H. L. Guo², S. R. Zhang³

Chalcogenide Letters, Vol.22, No.12, pp. 987-997, 2025, DOI:10.15251/CL.2025.2212.987 - 01 December 2025

Abstract Using first-principles calculations, the physical behavior of α-Cu₂Se are thoroughly examined. The computed structural parameters align closely with experimental data. Through computational analysis, the electronic properties for α-Cu₂Se are determined. Additionally, mechanical characteristics-including bulk modulus B, shear modulus G, Young’s modulus E, and B/G are evaluated under varying pressure conditions. Furthermore, the optical properties are investigated. The study reveals that α-Cu₂Se exhibits a direct bandgap of 0.782 eV, indicating its promising potential for optoelectronic applications. More >