Hongfei Yue¹, Aiguo Fang², Sudong Hua^1,*, Zenghuan Gu³, Yu Jia¹, Cheng Yang⁴

Journal of Renewable Materials, Vol.10, No.8, pp. 2247-2261, 2022, DOI:10.32604/jrm.2022.018901 - 25 April 2022

Abstract A phosphogypsum-based subgrade stabilizer (PBSS) was formulated using industrial by-product phosphogypsum (PG), mixed with slag and calcium-silicon-rich active material (GSR). The active powder (AP) was used to modify PBSS, and PBSS-AP was obtained. PBSS and PBSS-AP were each mixed with 10% silty soil, and cement and lime (CAL: 5% lime + 2% cement) were used as the traditional material for comparative experiments. Samples were cured under standard conditions, and tested for unconfined compressive strength (UCS), water stability, volume expansion, and leachate, to explore the stabilization effect of the three solidified materials on silty soil. The More >

Abhishek Kumar Shukla^*, Sujoy Das

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3557-3570, 2022, DOI:10.32604/cmc.2022.022411 - 07 December 2021

Abstract The neural network has attracted researchers immensely in the last couple of years due to its wide applications in various areas such as Data mining, Natural language processing, Image processing, and Information retrieval etc. Word embedding has been applied by many researchers for Information retrieval tasks. In this paper word embedding-based skip-gram model has been developed for the query expansion task. Vocabulary terms are obtained from the top “k” initially retrieved documents using the Pseudo relevance feedback model and then they are trained using the skip-gram model to find the expansion terms for the user… More >

Yujie Huang¹, Yifan Zhang¹, Zheng Wang^1,*, Assima Dauletbe², Yao Lu¹, Zhaoyu Shen¹

Journal of Renewable Materials, Vol.10, No.3, pp. 849-870, 2022, DOI:10.32604/jrm.2022.018515 - 28 September 2021

Abstract To describe the dynamic cracking process of the CLT vertical layer, the correlation between a load-displacement curve, specimen cracking, and planar shear failure mechanism of the CLT were explored. A three-point bending test and an improved planar shear test are used to evaluate the shear performance of the CLT. In this study, the load-displacement curve is recorded, the experimental part is synchronized with the video, the dynamic process of cracking of the vertical layer is observed and analyzed throughout the test. From the load-displacement curve, the image characteristics of the initial cracking and the sudden… More > Graphic Abstract

T. Manoj Kumar^1,*, P. Karthigaikumar²

Intelligent Automation & Soft Computing, Vol.31, No.2, pp. 1025-1036, 2022, DOI:10.32604/iasc.2022.020090 - 22 September 2021

Abstract

Data security is an essential aspect of data communication and data storage. To provide high-level security against all kinds of unauthorized accesses, cryptographic algorithms have been applied to various fields such as medical and military applications. Advanced Encryption Standard (AES), a symmetric cryptographic algorithm, is acknowledged as the most secure algorithm for the cryptographic process globally. Several modifications have been made to the original architecture after it was proposed by two Belgian researchers, Joan Daemen and Vincent Rijment, at the third AES candidate Conference in 2000. The existing modifications aim to increase security and speed.

… More >

Yan Hong¹, Bai-Ni Guo^2,*, Feng Qi³

CMES-Computer Modeling in Engineering & Sciences, Vol.129, No.1, pp. 409-423, 2021, DOI:10.32604/cmes.2021.016431 - 24 August 2021

Abstract In the paper, by virtue of a general formula for any derivative of the ratio of two differentiable functions, with the aid of a recursive property of the Hessenberg determinants, the authors establish determinantal expressions and recursive relations for the Bessel zeta function and for a sequence originating from a series expansion of the power of modified Bessel function of the first kind. More >

Lingai Guo¹, Marwan Fahs², Hussein Hoteit³, Rui Gao^1,*, Qian Shao^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.129, No.1, pp. 279-297, 2021, DOI:10.32604/cmes.2021.016619 - 24 August 2021

Abstract Numerical modeling of seepage-induced consolidation process usually encounters significant uncertainty in the properties of geotechnical materials. Assessing the effect of uncertain parameters on the performance variability of the seepage consolidation model is of critical importance to the simulation and tests of this process. To this end, the uncertainty and sensitivity analyses are performed on a seepage consolidation model in a fractured porous medium using the Bayesian sparse polynomial chaos expansion (SPCE) method. Five uncertain parameters including Young’s modulus, Poisson’s ratio, and the permeability of the porous matrix, the permeability within the fracture, and Biot’s constant… More >

Hulya Durur¹, Asıf Yokuş², Doğan Kaya³, Hijaz Ahmad^4,*

Sound & Vibration, Vol.55, No.3, pp. 241-251, 2021, DOI:10.32604/sv.2021.014157 - 15 July 2021

Abstract In this paper, sub equation and expansion methods are proposed to construct exact solutions of a nonlinear longitudinal wave equation (LWE) in a magneto-electro-elastic circular rod. The proposed methods have been used to construct hyperbolic, rational, dark soliton and trigonometric solutions of the LWE in the magneto-electro-elastic circular rod. Arbitrary values are given to the parameters in the solutions obtained. 3D, 2D and contour graphs are presented with the help of a computer package program. Solutions attained by symbolic calculations revealed that these methods are effective, reliable and simple mathematical tool for finding solutions of More >

Ellie Vineyard¹, Xin-Lin Gao^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.3, pp. 819-854, 2021, DOI:10.32604/cmes.2021.015688 - 24 May 2021

Abstract 2-D and 3-D micro-architectured multiphase thermoelastic metamaterials are designed and analyzed using a parametric level set method for topology optimization and the finite element method. An asymptotic homogenization approach is employed to obtain the effective thermoelastic properties of the multiphase metamaterials. The -constraint multi-objective optimization method is adopted in the formulation. The coefficient of thermal expansion (CTE) and Poisson’s ratio (PR) are chosen as two objective functions, with the CTE optimized and the PR treated as a constraint. The optimization problems are solved by using the method of moving asymptotes. Effective isotropic and anisotropic CTEs More >

Park Chan-Yeob, Hyun-Ro Jae, Jun-Yong Jang, Song Hyoung-Kyu^*

CMC-Computers, Materials & Continua, Vol.68, No.1, pp. 137-148, 2021, DOI:10.32604/cmc.2021.016108 - 22 March 2021

Abstract Linear precoding methods such as zero-forcing (ZF) are near optimal for downlink massive multi-user multiple input multiple output (MIMO) systems due to their asymptotic channel property. However, as the number of users increases, the computational complexity of obtaining the inverse matrix of the gram matrix increases. For solving the computational complexity problem, this paper proposes an improved Jacobi (JC)-based precoder to improve error performance of the conventional JC in the downlink massive MIMO systems. The conventional JC was studied for solving the high computational complexity of the ZF algorithm and was able to achieve parallel… More >

Liqun Wang¹, Zengtao Chen², Guolai Yang^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.126, No.2, pp. 479-503, 2021, DOI:10.32604/cmes.2021.011954 - 21 January 2021

Abstract This paper proposes a non-intrusive uncertainty analysis method for artillery dynamics involving hybrid uncertainty using polynomial chaos expansion (PCE). The uncertainty parameters with sufficient information are regarded as stochastic variables, whereas the interval variables are used to treat the uncertainty parameters with limited stochastic knowledge. In this method, the PCE model is constructed through the Galerkin projection method, in which the sparse grid strategy is used to generate the integral points and the corresponding integral weights. Through the sampling in PCE, the original dynamic systems with hybrid stochastic and interval parameters can be transformed into… More >