Kexin Zhang¹, Bin Lin^2,*, Jixin Chen¹, Xinlong Wu¹, Chao Lu³, Desheng Zheng¹, Lulu Tian⁴

Computer Systems Science and Engineering, Vol.42, No.1, pp. 351-360, 2022, DOI:10.32604/csse.2022.021132

Abstract Deep learning techniques have outstanding performance in feature extraction and model fitting. In the field of aero-engine fault diagnosis, the introduction of deep learning technology is of great significance. The aero-engine is the heart of the aircraft, and its stable operation is the primary guarantee of the aircraft. In order to ensure the normal operation of the aircraft, it is necessary to study and diagnose the faults of the aero-engine. Among the many engine failures, the one that occurs more frequently and is more hazardous is the wheeze, which often poses a great threat to flight safety. On the basis… More >

Debiao Meng^1,2,3,*, Hongtao Wang¹, Shiyuan Yang¹, Zhiyuan Lv¹, Zhengguo Hu¹, Zihao Wang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.130, No.1, pp. 543-558, 2022, DOI:10.32604/cmes.2022.018123

Abstract In a wind turbine, the rolling bearing is the critical component. However, it has a high failure rate. Therefore, the failure analysis and fault diagnosis of wind power rolling bearings are very important to ensure the high reliability and safety of wind power equipment. In this study, the failure form and the corresponding reason for the failure are discussed firstly. Then, the natural frequency and the characteristic frequency are analyzed. The Empirical Mode Decomposition (EMD) algorithm is used to extract the characteristics of the vibration signal of the rolling bearing. Moreover, the eigenmode function is obtained and then filtered by… More >

R. Surendran^1,*, Osamah Ibrahim Khalaf², Carlos Andres Tavera Romero³

CMC-Computers, Materials & Continua, Vol.70, No.3, pp. 6323-6338, 2022, DOI:10.32604/cmc.2022.021716

Abstract In the present industrial revolution era, the industrial mechanical system becomes incessantly highly intelligent and composite. So, it is necessary to develop data-driven and monitoring approaches for achieving quick, trustable, and high-quality analysis in an automated way. Fault diagnosis is an essential process to verify the safety and reliability operations of rotating machinery. The advent of deep learning (DL) methods employed to diagnose faults in rotating machinery by extracting a set of feature vectors from the vibration signals. This paper presents an Intelligent Industrial Fault Diagnosis using Sailfish Optimized Inception with Residual Network (IIFD-SOIR) Model. The proposed model operates on… More >

Junyu Chen¹, Yunwen Feng^1,*, Cheng Lu^1,2, Chengwei Fei²

CMES-Computer Modeling in Engineering & Sciences, Vol.129, No.2, pp. 1013-1027, 2021, DOI:10.32604/cmes.2021.016980

Abstract As the key component in aeroengine rotor systems, the health status of rolling bearings directly influences the reliability and safety of aeroengine rotor systems. In order to monitor rolling bearing conditions, a fusion fault diagnosis method, namely empirical mode decomposition (EMD)-Mahalanobis distance (E2MD) and improved wavelet threshold (IWT) (E2MD-IWT) for vibrational signals and acoustic emission (AE) signals is developed to improve the diagnostic accuracy of rolling bearings. The IWT method is proposed with a hard wavelet threshold and a soft wavelet threshold. Moreover, it is shown to be effective through numerical simulation. EMD is utilized to process the original AE… More >

Wei Zhang^1,2, Qihui Ling^1,2,*, Qiancheng Zhao^1,2, Hushu Wu³

Energy Engineering, Vol.118, No.5, pp. 1515-1535, 2021, DOI:10.32604/EE.2021.014162

Abstract The condition monitoring and fault diagnosis have been identified as the key to achieving higher availabilities of wind turbines. Numerous studies show that the open-circuit fault is a significant contributor to the failures of wind turbine converter. However, the multiple faults combinations and the influence of wind speed changes abruptly, grid voltage sags and noise interference have brought great challenges to fault diagnosis. Accordingly, concerning the open-circuit fault of converters in direct-driven PMSG wind turbine, a diagnostic method for multiple open-circuit faults is proposed in this paper, which is divided into two tasks: The first one is the fault detection… More >

Dileep Kumar^1,*, Imtiaz Hussain Kalwar², Tanweer Hussain¹, Bhawani Shankar Chowdhry¹, Sanaullah Mehran Ujjan¹, Tayab Din Memon³

CMC-Computers, Materials & Continua, Vol.69, No.1, pp. 393-408, 2021, DOI:10.32604/cmc.2021.014941

Abstract Reliability of rotating machines is highly dependent on the smooth rolling of bearings. Thus, it is very essential for reliable operation of rotating machines to monitor the working condition of bearings using suitable fault diagnosis and condition monitoring approach. In the recent past, Deep Learning (DL) has become applicable in condition monitoring of rotating machines owing to its performance. This paper proposes a novel bearing fault diagnosis method based on the processing and analysis of the vibration images. The proposed method is the UNET model that is a recent development in DL models. The model is applied to the 2D… More >

Ibrahim B.M. Taha¹, Diaa-Eldin A. Mansour^2,*

Intelligent Automation & Soft Computing, Vol.28, No.3, pp. 739-752, 2021, DOI:10.32604/iasc.2021.017703

Abstract Power transformer is one of the more important components of electrical power systems. The early detection of transformer faults increases the power system reliability. Dissolved gas analysis (DGA) is one of the most favorite approaches used for power transformer fault prediction due to its easiness and applicability for online diagnosis. However, the imbalanced, insufficient and overlap of DGA dataset impose a challenge towards powerful and accurate diagnosis. In this work, a novel fault diagnosis for power transformers is introduced based on DGA by using data transformation and six optimized machine learning (OML) methods. Four data transformation techniques are used with… More >

Gopi Krishna Durbhaka¹, Barani Selvaraj¹, Mamta Mittal², Tanzila Saba^3,*, Amjad Rehman³, Lalit Mohan Goyal⁴

CMC-Computers, Materials & Continua, Vol.66, No.2, pp. 2041-2059, 2021, DOI:10.32604/cmc.2020.013131

Abstract Nowadays, renewable energy has been emerging as the major source of energy and is driven by its aggressive expansion and falling costs. Most of the renewable energy sources involve turbines and their operation and maintenance are vital and a difficult task. Condition monitoring and fault diagnosis have seen remarkable and revolutionary up-gradation in approaches, practices and technology during the last decade. Turbines mostly do use a rotating type of machinery and analysis of those signals has been challenging to localize the defect. This paper proposes a new hybrid model wherein multiple swarm intelligence models have been evaluated to optimize the… More >

R. Uma Maheswari^1,*, R. Umamaheswari²

Intelligent Automation & Soft Computing, Vol.26, No.3, pp. 479-488, 2020, DOI:10.32604/iasc.2020.013924

Abstract To enhance the predictive condition-based maintenance (CBMS), a reliable automatic Drivetrain fault detection technique based on vibration monitoring is proposed. Accelerometer sensors are mounted on a wind turbine drivetrain at different spatial locations to measure the vibration from multiple vibration sources. In this work, multi-channel signals are fused and monocomponent modes of oscillation are reconstructed by the Multivariate Empirical Mode Decomposition (MEMD) Technique. Noise assisted methodology is adapted to palliate the mixing of modes with common frequency scales. The instantaneous amplitude envelope and instantaneous frequency are estimated with the Hilbert transform. Low order and high order statistical moments, signal feature… More >

Gulsah Karaduman^*, Mehmet Karakose, Ilhan Aydin, Erhan Akin

Intelligent Automation & Soft Computing, Vol.26, No.3, pp. 455-463, 2020, DOI:10.32604/iasc.2020.013922

Abstract The use of railways has continually increased with high-speed trains. The increased speed and usage wear on the rails poses a serious problem. In recent years, to detect wear and cracks in the rails, image-based detection methods have been developed. In this paper, wears on the surface of railheads are detected by contactless image processing and image analysis techniques. The shadow removal algorithm with a minimal entropy method is implemented onto the noise-free images to eliminate the light variations that can occur on the rail. The Hough transform is applied on the noise and shadow free image in order to… More >