X. X. Cui¹, X. Zhang^1,2, K. Y. Sze³, X. Zhou⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.92, No.5, pp. 507-538, 2013, DOI:10.3970/cmes.2013.092.507

Abstract Based on the material point method (MPM), an alternating finite difference material point (AFDMP) method is proposed for modeling the 3D high explosive (HE) explosion and its interaction with structures nearby. The initiatory detonation and eventual fluid structure interaction (FSI) are simulated by the standard MPM. On the other hand, the finite difference method (FDM) is employed to simulate the dispersion of the detonation products into the surrounding air where the particles degenerate to marker points which track the moving interface between detonation products and air. The conversion between MPM and FDM is implemented by the projection between the particles… More >

A. N. Guz, V. A. Dekret¹

CMES-Computer Modeling in Engineering & Sciences, Vol.13, No.3, pp. 165-170, 2006, DOI:10.3970/cmes.2006.013.165

Abstract Stability problem of composite material reinforced by two parallel short fibers is solved. The problem is formulated with application of equations of linearized three-dimensional theory of stability. The composite is modeled as piecewise-homogeneous medium. The influence of geometrical and mechanical parameters of the material on critical strain is investigated. More >

V.C. Mariani¹, V. J. Neckel², L. S. Coelho³

CMES-Computer Modeling in Engineering & Sciences, Vol.68, No.2, pp. 167-184, 2010, DOI:10.3970/cmes.2010.068.167

Abstract In this study an inverse heat conduction problem using two optimization methods to estimate apparent thermal diffusivity at different drying temperatures is solved. Temperature and moisture versus time were obtained numerically using heat and mass transfer equations with drying temperatures in the range between 20°C to 70°C. The solution of the partial differential equation is made with a finite difference method coupled to optimization techniques of Differential Evolution (DE) and Particle Swarm Optimization (PSO) used in inverse problem. Statistical analysis shows no significant differences between reported and estimated curves, and no remarkable differences between results obtained using DE and PSO… More >

Hsiang-Wen Tang, Cha’o-Kung Chen¹, Chen-Yu Chiang

CMES-Computer Modeling in Engineering & Sciences, Vol.65, No.1, pp. 95-106, 2010, DOI:10.3970/cmes.2010.065.095

Abstract Up to now, solving some nonlinear differential equations is still a challenge to many scholars, by either numerical or theoretical methods. In this paper, the method of the maximum principle applied on differential equations incorporating the Residual Correction Method is brought up and utilized to obtain the upper and lower approximate solutions of nonlinear heat transfer problem of the non-Fourier fin. Under the fundamental of the maximum principle, the monotonic residual relations of the partial differential governing equation are established first. Then, the finite difference method is applied to discretize the equation, converting the differential equation into the mathematical programming… More >

Chun Yang^1,2, Dalin Tang^2,3 Satya Atluri⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.57, No.1, pp. 51-76, 2010, DOI:10.3970/cmes.2010.057.051

Abstract Cardiovascular disease (CVD) is becoming the number one cause of death worldwide. Atherosclerotic plaque rupture and progression are closely related to most severe cardiovascular syndromes such as heart attack and stroke. Mechanisms governing plaque rupture and progression are not well understood. A computational procedure based on three-dimensional meshless generalized finite difference (MGFD) method and serial magnetic resonance imaging (MRI) data was introduced to quantify patient-specific carotid atherosclerotic plaque growth functions and simulate plaque progression. Participating patients were scanned three times (T1, T2, and T3, at intervals of about 18 months) to obtain plaque progression data. Vessel wall thickness (WT) changes… More >

J. Sladek¹, V. Sladek¹, M. Wünsche², Ch. Zhang²

CMES-Computer Modeling in Engineering & Sciences, Vol.54, No.2, pp. 223-252, 2009, DOI:10.3970/cmes.2009.054.223

Abstract A meshless method based on the local Petrov-Galerkin approach is proposed, to solve the interface crack problem between two dissimilar anisotropic elastic solids. Both stationary and transient mechanical and thermal loads are considered for two-dimensional (2-D) problems in this paper. A Heaviside step function as the test functions is applied in the weak-form to derive local integral equations. Nodal points are spread on the analyzed domain, and each node is surrounded by a small circle for simplicity. The spatial variations of the displacements and temperature are approximated by the Moving Least-Squares (MLS) scheme. After performing the spatial integrations, one obtains… More >

A.N. Guz, V.A. Dekret¹

CMES-Computer Modeling in Engineering & Sciences, Vol.49, No.1, pp. 69-80, 2009, DOI:10.3970/cmes.2009.049.069

Abstract The two models in the three-dimensional theory of stability of the nanotube reinforced composite materials are discussed. The model of "infinite fibers" and the model of "short fibers" are considered. The primary objective is attended to "short fibers" model. All results are obtained in the framework of the three-dimensional linearized theory of stability of deformable bodies. More >

Arif Amirov¹, Fikret Gölgeleyen¹, Ayten Rahmanova²

CMES-Computer Modeling in Engineering & Sciences, Vol.43, No.2, pp. 131-148, 2009, DOI:10.3970/cmes.2009.043.131

Abstract This paper has two purposes. The first is to prove existence and uniqueness theorems for the solution of an inverse problem for the general linear kinetic equation with a scattering term. The second one is to develop a numerical approximation method for the solution of this inverse problem for two dimensional case using finite difference method. More >

Cha’o-Kuang Chen^1,2, Hsin-Yi Lai¹, Chin-Chia Liu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.40, No.2, pp. 155-174, 2009, DOI:10.3970/cmes.2009.040.155

Abstract Electrostatically-actuated micro circular plates are used in many micro-electro-mechanical systems (MEMS) devices nowadays such as micro pumps and optical switches. However, the dynamic behavior of these circular plates is not easily analyzed using traditional analytic methods due to the complexity of the interactions between the electrostatic coupling effects. Accordingly, this study develops an efficient computational scheme in which the nonlinear governing equation of the coupled electrostatic force acting on the micro circular plate is solved using a hybrid differential transformation / finite difference approximation method. In deriving the dynamic equation of motion of the micro plate, explicit account is taken… More >

J.J. Benito¹, F. Ureňa², L. Gavete³, B. Alonso³

CMES-Computer Modeling in Engineering & Sciences, Vol.38, No.1, pp. 39-58, 2008, DOI:10.3970/cmes.2008.038.039

Abstract One of the most universal and effective methods, in wide use today, for solving equations of mathematical physics approximately is the finite difference method (FDM). The Generalized finite difference method (GFDM) is evolved fron classical (FDM), which can be applied over general or irregular clouds of points.
This paper starts by showing the GFDM. In this paper, this meshless method is used for solving second-order partial (pde's) with constant coefficients in any type of domain. The method gives the values of derivatives in the nodes using the direct application of the formulae in differences obtained.
The following points describe… More >