Aoqi Xu¹, Khalid A. Alattas², Nasreen Kausar³, Ardashir Mohammadzadeh⁴, Ebru Ozbilge^5,*, Tonguc Cagin⁵

Intelligent Automation & Soft Computing, Vol.37, No.1, pp. 17-32, 2023, DOI:10.32604/iasc.2023.036623

Abstract In many problems, to analyze the process/metabolism behavior, a model of the system is identified. The main gap is the weakness of current methods vs. noisy environments. The primary objective of this study is to present a more robust method against uncertainties. This paper proposes a new deep learning scheme for modeling and identification applications. The suggested approach is based on non-singleton type-3 fuzzy logic systems (NT3-FLSs) that can support measurement errors and high-level uncertainties. Besides the rule optimization, the antecedent parameters and the level of secondary memberships are also adjusted by the suggested square root cubature Kalman filter (SCKF).… More >

Salah-ud-din Khokhar^1,2,*, QinKe Peng¹, Muhammad Yasir Noor³

CMC-Computers, Materials & Continua, Vol.75, No.2, pp. 2413-2427, 2023, DOI:10.32604/cmc.2023.036148

Abstract For fuzzy systems to be implemented effectively, the fuzzy membership function (MF) is essential. A fuzzy system (FS) that implements precise input and output MFs is presented to enhance the performance and accuracy of single-input single-output (SISO) FSs and introduce the most applicable input and output MFs protocol to linearize the fuzzy system’s output. Utilizing a variety of non-linear techniques, a SISO FS is simulated. The results of FS experiments conducted in comparable conditions are then compared. The simulated results and the results of the experimental setup agree fairly well. The findings of the suggested model demonstrate that the relative… More >

Ala Saleh Alluhaidan^1,*, Pushparaj², Anitha Subbappa³, Ved Prakash Mishra⁴, P. V. Chandrika⁵, Anurika Vaish⁶, Sarthak Sengupta⁶

CMC-Computers, Materials & Continua, Vol.74, No.3, pp. 5821-5836, 2023, DOI:10.32604/cmc.2023.033995

Abstract ESystems based on EHRs (Electronic health records) have been in use for many years and their amplified realizations have been felt recently. They still have been pioneering collections of massive volumes of health data. Duplicate detections involve discovering records referring to the same practical components, indicating tasks, which are generally dependent on several input parameters that experts yield. Record linkage specifies the issue of finding identical records across various data sources. The similarity existing between two records is characterized based on domain-based similarity functions over different features. De-duplication of one dataset or the linkage of multiple data sets has become… More >

Usama Abdur Rahman^1,*, C. Jayakumar², Deepak Dahiya³, C.R. Rene Robin⁴

Computer Systems Science and Engineering, Vol.45, No.1, pp. 409-426, 2023, DOI:10.32604/csse.2023.026846

Abstract As a component of Wireless Sensor Network (WSN), Visual-WSN (VWSN) utilizes cameras to obtain relevant data including visual recordings and static images. Data from the camera is sent to energy efficient sink to extract key-information out of it. VWSN applications range from health care monitoring to military surveillance. In a network with VWSN, there are multiple challenges to move high volume data from a source location to a target and the key challenges include energy, memory and I/O resources. In this case, Mobile Sinks(MS) can be employed for data collection which not only collects information from particular chosen nodes called… More >

Adnan Ahmed Rafique¹, Yazeed Yasin Ghadi², Suliman A. Alsuhibany³, Samia Allaoua Chelloug^4,*, Ahmad Jalal¹, Jeongmin Park⁵

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 4657-4675, 2022, DOI:10.32604/cmc.2022.027720

Abstract Latest advancements in vision technology offer an evident impact on multi-object recognition and scene understanding. Such scene-understanding task is a demanding part of several technologies, like augmented reality-based scene integration, robotic navigation, autonomous driving, and tourist guide. Incorporating visual information in contextually unified segments, convolution neural networks-based approaches will significantly mitigate the clutter, which is usual in classical frameworks during scene understanding. In this paper, we propose a convolutional neural network (CNN) based segmentation method for the recognition of multiple objects in an image. Initially, after acquisition and preprocessing, the image is segmented by using CNN. Then, CNN features are… More >

Ahmed S. Almasoud¹, Taiseer Abdalla Elfadil Eisa², Marwa Obayya³, Abdelzahir Abdelmaboud⁴, Mesfer Al Duhayyim⁵, Ishfaq Yaseen⁶, Manar Ahmed Hamza^6,*, Abdelwahed Motwakel⁶

CMC-Computers, Materials & Continua, Vol.72, No.2, pp. 3269-3281, 2022, DOI:10.32604/cmc.2022.024584

Abstract In recent days, internet of things is widely implemented in Wireless Sensor Network (WSN). It comprises of sensor hubs associated together through the WSNs. The WSN is generally affected by the power in battery due to the linked sensor nodes. In order to extend the lifespan of WSN, clustering techniques are used for the improvement of energy consumption. Clustering methods divide the nodes in WSN and form a cluster. Moreover, it consists of unique Cluster Head (CH) in each cluster. In the existing system, Soft-K means clustering techniques are used in energy consumption in WSN. The soft-k means algorithm does… More >

Shruti Jain¹, Cherry Bhargava², Vijayakumar Varadarajan³, Ketan Kotecha^4,*

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 1815-1829, 2022, DOI:10.32604/cmc.2022.024004

Abstract In the recent decade, different researchers have performed hardware implementation for different applications covering various areas of experts. In this research paper, a novel analog design and implementation of different steps of fuzzy systems with current differencing buffered amplifier (CDBA) are proposed with a compact structure that can be used in many signal processing applications. The proposed circuits are capable of wide input current range, simple structure, and are highly linear. Different electrical parameters were compared for the proposed fuzzy system when using different membership functions. The novelty of this paper lies in the electronic implementation of different steps for… More >

Shaleeza Sohail¹, Atif Alvi^2,*, Aasia Khanum³

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3211-3225, 2022, DOI:10.32604/cmc.2022.023560

Abstract Major issues currently restricting the use of learning analytics are the lack of interpretability and adaptability of the machine learning models used in this domain. Interpretability makes it easy for the stakeholders to understand the working of these models and adaptability makes it easy to use the same model for multiple cohorts and courses in educational institutions. Recently, some models in learning analytics are constructed with the consideration of interpretability but their interpretability is not quantified. However, adaptability is not specifically considered in this domain. This paper presents a new framework based on hybrid statistical fuzzy theory to overcome these… More >

Aayesha¹, Muhammad Bilal Qureshi², Muhammad Afzaal³, Muhammad Shuaib Qureshi⁴, Jeonghwan Gwak^5,6,7,8,*

CMC-Computers, Materials & Continua, Vol.70, No.3, pp. 5601-5630, 2022, DOI:10.32604/cmc.2022.020348

Abstract Detection of epileptic seizures on the basis of Electroencephalogram (EEG) recordings is a challenging task due to the complex, non-stationary and non-linear nature of these biomedical signals. In the existing literature, a number of automatic epileptic seizure detection methods have been proposed that extract useful features from EEG segments and classify them using machine learning algorithms. Some characterizing features of epileptic and non-epileptic EEG signals overlap; therefore, it requires that analysis of signals must be performed from diverse perspectives. Few studies analyzed these signals in diverse domains to identify distinguishing characteristics of epileptic EEG signals. To pose the challenge mentioned… More >

Munir Ahmad¹, Majed Alfayad², Shabib Aftab^1,3, Muhammad Adnan Khan^4,*, Areej Fatima⁵, Bilal Shoaib⁶, Mohammad Sh. Daoud⁷, Nouh Sabri Elmitwally^2,8

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2717-2731, 2021, DOI:10.32604/cmc.2021.019013

Abstract Heart disease, which is also known as cardiovascular disease, includes various conditions that affect the heart and has been considered a major cause of death over the past decades. Accurate and timely detection of heart disease is the single key factor for appropriate investigation, treatment, and prescription of medication. Emerging technologies such as fog, cloud, and mobile computing provide substantial support for the diagnosis and prediction of fatal diseases such as diabetes, cancer, and cardiovascular disease. Cloud computing provides a cost-efficient infrastructure for data processing, storage, and retrieval, with much of the extant research recommending machine learning (ML) algorithms for… More >