Xinliang Li¹, Jiangang Guo^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-2, 2023, DOI:10.32604/icces.2023.09484

Abstract As the first two-dimensional (2D) material discovered in experiments, graphene has attracted increasing attention from the scientific community [1]. And it possesses many superb mechanical, electronic and optical properties [2-4] due to its unique atomic structure. Its Young’s modulus and failure strength are 1TPa and 130GPa [5], respectively. Thus, 2D graphene has been extensively used in nanosensors and nanocomposites [6-8], etc. In order to fabricate graphene-based devices which inherit outstanding properties of 2D graphene, materials scientists are trying to use 2D graphene as building blocks to construct three-dimensional (3D) carbon nanomaterials, such as 3D graphene networks [9-11]. Nowadays, these 3D… More >

Fujian Zhang¹, Xiang Gao¹, Zhongqiang Zhang^1,2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.09169

Abstract Biological features such as the bumps on the back of desert beetles and the spikes of cacti enable the directional transport of water droplets, creating conditions for their survival in nature. Inspired by the interesting natural phenomenon, a novel design of nanopillared surface with a gradient density of structural pillar matrix covered by a monolayer graphene is proposed to realize ultrafast self-driving of water droplets. The droplet can move spontaneously at ultrahigh speed of 75.7 m/s (272.52 km/h) from sparsest to densest regions of pillars while a wettability gradient is created by the gradient distribution density of pillar matrix relying… More >

Shuai Wang^1,*, Lihong Liang^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-2, 2023, DOI:10.32604/icces.2023.09163

Abstract Compared to pure carbon nanotube (CNT) foam (CF) and pure graphene foam (GrF), the CNT/graphene composite foam show enhanced mechanical properties, using coarse-grained molecular dynamics method, the tensile and compressive properties and corresponding deformation mechanism of several typical CNT/graphene composite foams were studied. The CNT coating could enhance the bending resistance of graphene, based on the CNT-coated graphene flakes, the CNT-coated graphene foam (CCGF) is constructed, which shows better compressive modulus due to the enhanced bending resistance of CNT-coated graphene flakes compared to graphene in pure GrF [1]. CNT can enhance the mechanical properties of graphene foams not only by… More >

Puneet Kumar Mishra¹, Amrita Rai¹, Nitin Sharma², Kanika Sharma³, Nitin Mittal⁴, Mohd Anul Haq^5,*, Ilyas Khan⁶, ElSayed M. Tag El Din⁷

CMC-Computers, Materials & Continua, Vol.76, No.1, pp. 1309-1320, 2023, DOI:10.32604/cmc.2023.033828

Abstract The fundamental advantages of carbon-based graphene material, such as its high tunnelling probability, symmetric band structure (linear dependence of the energy band on the wave direction), low effective mass, and characteristics of its 2D atomic layers, are the main focus of this research work. The impact of channel thickness, gate under-lap, asymmetric source/drain doping method, workfunction of gate contact, and High-K material on Graphene-based Tunnel Field Effect Transistor (TFET) is analyzed with 20 nm technology. Physical modelling and electrical characteristic performance have been simulated using the Atlas device simulator of SILVACO TCAD with user-defined material syntax for the newly included… More >

Nurul Anis Athirah Ab Aziz^*, Chin Wei Lai^*, Boon Hoong Ong

Journal of Renewable Materials, Vol.11, No.6, pp. 2745-2770, 2023, DOI:10.32604/jrm.2023.025899

Abstract Nowadays, corrosion is not only undesirable, but it also has a significant influence on the industrial sectors and technical innovations that have demand for metals. The global economic damage is expected to reach $2.5 trillion, equivalent to more than 3.4% of the world’s GDP in 2013. It is linked with significant financial harm, manufacturing pollution, and safety issues. An electrochemical process primarily induces metal corrosion at the metalelectrolyte interface region, caused by steel oxidation and the reduction of oxygen, protons, and water. Therefore, organic and epoxy coatings can be applied as protective coatings. Additionally, it can prevent metal corrosion in… More > Graphic Abstract

Thaer Al-Jadir^1,*, Laith S. Sabri², Wafaa A. Kadhim³, Saja Mohsen Alardhi³, Raheek I. Ibrahim⁴

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.8, pp. 2067-2081, 2023, DOI:10.32604/fdmp.2023.027156

Abstract Graphene flakes (GF) have been prepared and assessed as a material for improving flow in oil pipelines under the effect of an electric field. In particular, different amounts of GFs have been considered in order to determine the optimal flow conditions. The GFs were prepared from graphite foam, derived from the dehydration of sugar with a particle size of 500–600 μm, which was dispersed in ethanol and exfoliated in a ball mill under a shear force. After 15 h of exfoliation, sonication, and subsequent high-speed centrifugation at 3000 rpm, irregular-shaped GFs of 50–140 nm were produced and characterized using scanning electron microscopy, X-ray… More > Graphic Abstract

Haoran Wei, Tian Ji, Jianqing Huang^*

Journal of Renewable Materials, Vol.11, No.2, pp. 731-743, 2023, DOI:10.32604/jrm.2022.022283

Abstract Simultaneous broadband absorption and polarization conversion are crucial in many practical applications, especially in terahertz communications. Thus, actively tunable metamaterial systems can exploit the graphene-based nanomaterials derived from renewable resources because of the flexible surface conductivity and selective permeability of the nanomaterials at terahertz frequencies. In this paper, we propose a graphene-based active tunable bifunctional metasurface for dynamic terahertz absorption and polarization conversion. The graphene ring presents a certain opening angle (A) along the diagonal of the xoy plane. When A = 0°, the proposed metasurface behaves as a broadband absorber. Numerical results show the feasibility of achieving this polarization-insensitive… More >

Dalong Liao, Dongxu Li^*, Shun Zhou, Xiaotao Zhang, Ying Fang^*

Journal of Renewable Materials, Vol.11, No.2, pp. 625-641, 2023, DOI:10.32604/jrm.2022.022501

Abstract Graphene oxide (GO) as a new nano-enhancer in cement-based materials has gained wide attention. However, GO is easy to aggregate in alkaline cement mortar with poor dispersibility. This hinders its application in practical infrastructure construction. In this work, GO-M18 polycarboxylate compound superplasticizer (GM) were obtained by compounding the M18 polycarboxylate superplasticizer with GO solution at different mass ratios. The dispersion of GM in alkaline solution was systematically studied. The phases and functional groups of GM were characterized by XRD and FTIR. The effects of GM on the cement mortar hydration and the formation of microstructure were investigated by measuring the… More > Graphic Abstract

Sung Won Hwang, Dae-Ki Hong^*

CMC-Computers, Materials & Continua, Vol.74, No.1, pp. 55-66, 2023, DOI:10.32604/cmc.2023.028845

Abstract The use a stabilized lithium structure as cathode material for batteries could be a fundamental alternative in the development of next-generation energy storage devices. However, the lithium structure severely limits battery life causes safety concerns due to the growth of lithium (Li) dendrites during rapid charge/discharge cycles. Solid electrolytes, which are used in high-density energy storage devices and avoid the instability of liquid electrolytes, can be a promising alternative for next-generation batteries. Nevertheless, poor lithium ion conductivity and structural defects at room temperature have been pointed out as limitations. In this study, through the application of a low-dimensional graphene quantum… More >

Lisheng Deng^1,2, Hongyu Huang^2,*, Zhaohong He², Shijie Li², Zhen Huang², Mitsuhiro Kubota³, You Zhou^4,*, Dezhen Chen¹

Journal of Renewable Materials, Vol.10, No.11, pp. 2895-2906, 2022, DOI:10.32604/jrm.2022.019071

Abstract Thermochemical heat storage material inorganic hydrate LiOH is selected as a promising candidate material for storing low-temperature heat energy because of its high energy density (1440 kJ/kg) and mild reaction process. However, the low hydration rate of LiOH limits the performance of low temperature thermochemical heat storage system as well as the thermal conductivity. In this study, porous-graphene/LiOH composite thermochemical heat storage materials with strong water sorption property and higher thermal conductivity were synthesized by hydrothermal process. The experimental results show that the hydration rate of the composites was greatly improved. The heat storage density of the composite materials was… More >