Yiming Zhao^1,2, Hongsheng Zhao³, Zhili Wei⁴, Jie Yuan¹, Jie Jian¹, Fankai Kong¹, Haojiang Xie¹, Xingliang Xiong^1,2,*

Journal of Renewable Materials, Vol.10, No.11, pp. 2729-2746, 2022, DOI:10.32604/jrm.2022.019721

Abstract The flexible wearable sensors with excellent stretchability, high sensitivity and good biocompatibility are signifi- cantly required for continuously physical condition tracking in health management and rehabilitation monitoring. Herein, we present a high-performance wearable sensor. The sensor is prepared with nanocomposite hydrogel by using silk fibroin (SF), polyacrylamide (PAM), polydopamine (PDA) and graphene oxide (GO). It can be used to monitor body motions (including large-scale and small-scale motions) as well as human electrophysiological (ECG) signals with high sensitivity, wide sensing range, and fast response time. Therefore, the proposed sensor is promising in the fields of rehabilitation, motion monitoring and disease diagnosis. More >

Omar A. Saraereh^*

CMC-Computers, Materials & Continua, Vol.73, No.1, pp. 1055-1066, 2022, DOI:10.32604/cmc.2022.030193

Abstract Wireless data traffic has expanded at a rate that reminds us of Moore’s prediction for integrated circuits in recent years, necessitating ongoing attempts to supply wireless systems with ever-larger data rates in the near future, despite the under-deployment of 5G networks. Terahertz (THz) communication has been considered a viable response to communication blackout due to the rapid development of THz technology and sensors. THz communication has a high frequency, which allows for better penetration. It is a fast expanding and evolving industry, driven by an increase in wireless traffic volume and data transfer speeds. A THz modulator based on a… More >

Sung Won Hwang, Dae-Ki Hong^*

CMC-Computers, Materials & Continua, Vol.72, No.2, pp. 3283-3297, 2022, DOI:10.32604/cmc.2022.025931

Abstract Artificial neural networks (ANNs) are attracting attention for their high performance in various fields, because increasing the network size improves its functioning. Since large-scale neural networks are difficult to implement on custom hardware, a two-dimensional (2D) structure is applied to an ANN in the form of a crossbar. We demonstrate a synapse crossbar device from recent research by applying a memristive system to neuromorphic chips. The system is designed using two-dimensional structures, graphene quantum dots (GQDs) and graphene oxide (GO). Raman spectrum analysis results indicate a D-band of 1421 cm⁻¹ that occurs in the disorder; band is expressed as an atomic… More >

Hebat-Allah S. Tohamy, Mohamed El-Sakhawy, Samir Kamel^*

Journal of Renewable Materials, Vol.10, No.7, pp. 1889-1909, 2022, DOI: 10.32604/jrm.2022.019211

Abstract A novel magnetic hydrogel loaded with graphene oxide (GO) was developed in this study. Firstly, GO was prepared from bagasse through a single step via oxidation in the presence of ferrocene under muffled atmospheric conditions, followed by the loading of different amounts of magnetite onto GO via co-precipitation reaction of iron onto GO sheets. Finally, the 2-acrylamido-2-methyl-1-propane sulfonic acid was grafted onto carboxymethyl cellulose in the presence of magnetite GO and N, N′-methylenebisacrylamide as crosslinker yielded hydrogel. The structure, morphological, and thermal behavior of the prepared hydrogels were investigated. In addition, the adsorption performance of Ni(II) ions from aqueous media… More > Graphic Abstract

Prach Asavanarakul, Amnoiy Ruengwaree^*, Suwat Sakulchat

CMC-Computers, Materials & Continua, Vol.71, No.3, pp. 4737-4748, 2022, DOI:10.32604/cmc.2022.023743

Abstract Globalization has opened practically every country in the globe to tourism and commerce today. In every region, the volume of vehicles traveling through border crossings has increased significantly. Smartcards and radio frequency identification (RFID) have been proposed as a new method of identifying and authenticating passengers, products, and vehicles. However, the usage of smartcards and RFID tag cards for vehicular border crossings continues to suffer security and flexibility challenges. Providing a vehicle's driver a smartcard or RFID tag card may result in theft, loss, counterfeit, imitation, or vehicle transmutation. RFID sticker tags would replace RFID tags as vehicle border passes… More >

Lingqin Zhang, Qifeng Jiang, Yiming Zhao, Jie Yuan, Xiaoying Zha, Haojiang Xie, Fankai Kong, Xingliang Xiong^*

Journal of Renewable Materials, Vol.10, No.2, pp. 415-430, 2022, DOI:10.32604/jrm.2022.016650

Abstract The hydrogel is a preferred material for flexible wearable sensors. In practical application, it should have high-efficiency mechanical toughness and self-healing performance. Besides, hydrogel requires good affinity and adhesion because of its contact with the skin. In this experiment, we made an ultra-tough hydrogel with excellent cell affinity and adhesion. We used sodium alginate (SA) and polyacrylamide (PAm) mixture as a flexible base fluid. Polydopamine reduce graphene oxide (prGO) was used as conductive nanofiller, and then PAm-prGO-SA semi-interpenetrating network hydrogel was formed through Am radical polymerization. The presence of prGO endows the hydrogels with excellent electrical conductivity. Simultaneously, some non-reduced… More >

Yuhua Yang^1,2, Ke Xu¹, Bo Zhao¹, Nana Liu¹, Jun Zhou^3,4,*

Journal of Renewable Materials, Vol.9, No.5, pp. 855-865, 2021, DOI:10.32604/jrm.2021.014525

Abstract Traditional carbon layer enwrapping active materials cannot easily realize perfect cladding. Therefore, it still cannot prevent the pulverization of active materials during the course of charging/discharging. In this paper, we utilize natural bacteria to absorb nickel acetate, the active materials Ni₃P nanoparticles are well enwrapped, as a natural organisms surviving for billions of years, their cell walls have a perfect carbon structure, and the cell walls become carbon layer through high annealing temperature. Based on this, the yolk-shell Ni₃P–carbon @ reduced graphene oxides paper is prepared, through a proper annealing temperature, the Ni₃P particles disperse in the inner surface or… More >

Qing Li¹, Ming Dai¹, Xueren Qian¹, Tian Liu¹, Zhenbo Liu¹, Yu Liu¹, Ming Chen¹, Wang He¹, Suqing Zeng¹, Yu Meng¹, Chenchen Dai¹, Jing Shen¹, Yingtao Liu¹, Wenshuai Chen¹, Wenbo Liu^1,*, Ping Lu^2,*

Journal of Renewable Materials, Vol.9, No.3, pp. 451-461, 2021, DOI:10.32604/jrm.2021.011655

Abstract Nanopaper has attracted considerable interest in the fields of films and paper research. However, the challenge of integrating the many advantages of nanopaper still remains. Herein, we developed a facile strategy to fabricate multifunctional nanocomposite paper (NGCP) composed of wood-derived nanofibrillated cellulose (NFC) and graphene as building blocks. NFC suspension was consisted of long and entangled NFCs (10–30 nm in width) and their aggregates. Before NGCP formation, NFC was chemically modified with a silane coupling agent to ensure that it could interact strongly with graphene in NGCP. The resulting NGCP samples were flexible and could be bent repeatedly without any… More >

Nishit Savla¹, Raksha Anand², Soumya Pandit^2,*, Ram Prasad^3,*

Journal of Renewable Materials, Vol.8, No.12, pp. 1581-1605, 2020, DOI:10.32604/jrm.2020.011803

Abstract Microbial fuel cells (MFCs) are an attractive innovation at the nexus of energy and water security for the future. MFC utilizes electrochemically active microorganisms to oxidize biodegradable substrates and generate bioelectricity in a single step. The material of the anode plays a vital role in increasing the MFC’s power output. The anode in MFC can be upgraded using nanomaterials providing benefits of exceptional physicochemical properties. The nanomaterials in anode gives a high surface area, improved electron transfer promotes electroactive biofilm. Enhanced power output in terms of Direct current (DC) can be obtained as the consequence of improved microbe-electrode interaction. However,… More >

Hamidreza Noori¹, Bohayra Mortazavi^{2, 3}, Alessandro Di Pierro⁴, Emad Jomehzadeh⁵, Xiaoying Zhuang^{2, 3}, Zi Goangseup⁶, Kim Sang-Hyun⁷, Timon Rabczuk^{8, 9, *}

CMC-Computers, Materials & Continua, Vol.65, No.3, pp. 2009-2032, 2020, DOI:10.32604/cmc.2020.011256

Abstract In modern physics and fabrication technology, simulation of projectile and target collision is vital to improve design in some critical applications, like; bulletproofing and medical applications. Graphene, the most prominent member of two dimensional materials presents ultrahigh tensile strength and stiffness. Moreover, polydimethylsiloxane (PDMS) is one of the most important elastomeric materials with a high extensive application area, ranging from medical, fabric, and interface material. In this work we considered graphene/PDMS structures to explore the bullet resistance of resulting nanocomposites. To this aim, extensive molecular dynamic simulations were carried out to identify the penetration of bullet through the graphene and… More >