Moran Wang^a, Bin-Yang Cao^b, Zeng-Yuan Guo^b,*

Frontiers in Heat and Mass Transfer, Vol.1, No.1, pp. 1-8, 2010, DOI:10.5098/hmt.v1.1.3004

Abstract The thermomass theory regards heat owning mass-energy duality, exhibiting energy-like features in conversion and mass-like features in transfer processes. The equivalent mass of thermal energy is determined by the mass-energy equivalence of Einstein, which therefore leads to the inertia of heat in transfer. In this work, we build up a thermomass gas model based on this theory to describe the fluid-flow-like heat conduction process in a medium. The equation of state and the governing equations for transport for the thermomass gas have been derived based on methodologies of the classical mechanics since the drift speed… More >

Je-Chin Han^*, Akhilesh P. Rallabandi

Frontiers in Heat and Mass Transfer, Vol.1, No.1, pp. 1-21, 2010, DOI:10.5098/hmt.v1.1.3001

Abstract Film cooling is widely used to protect modern gas turbine blades and vanes from the ever increasing inlet temperatures. Film cooling involves a very complex turbulent flow-field, the characterization of which is necessary for reliable and economical design. Several experimental studies have focused on gas turbine blade, vane and end-wall film cooling over the past few decades. Measurements of heat transfer coefficients, film cooling effectiveness values and heat flux ratios using several different experimental methods have been reported. The emphasis of this current review is on the Pressure Sensitive Paint (PSP) mass transfer analogy to More >

Mirassón¹ HR, ML Faraldo¹, MN Fioretti², M Miravalles², RE Brevedan²

Phyton-International Journal of Experimental Botany, Vol.79, pp. 183-187, 2010, DOI:10.32604/phyton.2010.79.183

Abstract Tillage system is an important management decision that has to be taken in the central, semiarid, temperate region of Argentina for dryland wheat production. A 2-year study was conducted on an Entic Haplustoll soil with a sandy loam texture to determine the effects of three tillage systems (conventional, vertical and notillage) on leaf water status and chlorophyll content. Measurements were made at the Z65 growth stage with a SPAD-502; leaf water potential measurements were simultaneously taken. There was a positive relationship between leaf water potential and leaf greenness in both years. Tillage systems were significantly More >

F. Dierich¹, P.A. Nikrityuk¹

CMES-Computer Modeling in Engineering & Sciences, Vol.64, No.3, pp. 251-266, 2010, DOI:10.3970/cmes.2010.064.251

Abstract This work presents a numerical investigation of the influence of the roughness of a cylindrical particle on the drag coefficient and the Nusselt number at low Reynolds numbers up to 40. The heated cylindrical particle is placed horizontally in a uniform flow. Immersed boundary method (IBM) with a continuous forcing on a fixed Cartesian grid is used. The governing equations are the Navier Stokes equation and the conservation of energy. A finite-volume based discretization and the SIMPLE algorithm with collocated-variables and Rie-Chow stabilization were used to solve the set of equations. Numerical simulations showed that More >

S.N. Lee¹, S.W. Baek¹, K.M. Kim², M.J. Yu³

The International Conference on Computational & Experimental Engineering and Sciences, Vol.15, No.1, pp. 1-8, 2010, DOI:10.3970/icces.2010.015.001

Abstract A finite volume method with nongray gases is applied to examine the radiative base heating due to plume which is changed by mechanical deflection. Numerical approaches are made to predict the effect of TVC. The radiative properties within plume flow are modeled with the weighted sum of 4 gray gases. The exhaust plume is considered as an absorbing and emitting medium with no scattering. Flow field is molded with using Preconditioned Navier-Stokes(N-S) algorithms with multi-block. The Geometric Conservation Law(GCL) is considered to compute the nozzle moving mechanism. The radiative base heating is changed by the More >

Adan Vega, Naoki Osawa, Sherif Rashed, Hidekazu Murakawa

CMES-Computer Modeling in Engineering & Sciences, Vol.69, No.3, pp. 261-280, 2010, DOI:10.3970/cmes.2010.069.261

Abstract A three dimensional thermal-elasto-plastic FEA has been performed to predict the heat induced (inherent) deformation produced in thick steel plates formed by line heating. Using this FEA, the edge effect on inherent deformation is clarified. From the results of this study, a method to predict the edge effect is developed. Using this method, the edge effect on inherent deformation, for a wide range of plate thickness and heating condition, can be easily predicted, been this, an important step toward the automation of the process. More >

A. Arefmanesh¹, M. Najafi², M. Nikfar³

CMES-Computer Modeling in Engineering & Sciences, Vol.69, No.2, pp. 91-118, 2010, DOI:10.3970/cmes.2010.069.091

Abstract Procuring a numerical solution through an application of the meshless local Petrov-Galerkin method (MLPG) on the fluid flow and mixed convection in a complex geometry cavity filled with a nanofluid is the scope of the present study. The cavity considered is a square enclosure having a lower temperature sliding lid at the top, a differentially higher temperature wavy wall at the bottom, and two thermally insulated walls on the sides. The nanofluid medium used is a water-based nanofluid, Al₂O₃-water with various volume fractions of its solid. To carry out the numerical simulations, the developed governing equations… More >

Ewa Majchrzak¹

CMES-Computer Modeling in Engineering & Sciences, Vol.69, No.1, pp. 43-60, 2010, DOI:10.3970/cmes.2010.069.043

Abstract Heat transfer processes proceeding in domain of heating tissue are discussed. The typical model of bioheat transfer bases, as a rule, on the well known Pennes equation, this means the heat diffusion equation with additional terms corresponding to the perfusion and metabolic heat sources. Here, the other approach basing on the dual-phase-lag equation (DPLE) is considered in which two time delays τ_q, τ_T (phase lags) appear. The DPL equation contains a second order time derivative and higher order mixed derivative in both time and space. This equation is supplemented by the adequate boundary and initial conditions. More >

Harishchandra Thakur¹, K. M. Singh², P. K. Sahoo³

CMES-Computer Modeling in Engineering & Sciences, Vol.68, No.2, pp. 117-150, 2010, DOI:10.3970/cmes.2010.068.117

Abstract MLPG method is a meshfree method which removes the need of meshing of computational domain at any stage of numerical analysis. Current article extends MLPG method to nonlinear heat conduction in irregular domains including the problem of solid-liquid phase change. Moving least square (MLS) scheme is used to interpolate the trial function and a fourth order spline function is used as the test function. Method of direct interpolation is used to enforce essential boundary conditions. Nonlinearities in the problems are handled with an iterative predictor-corrector method. Time integration is performed using θ-method. MLPG method has More >

Jong Keun Moon¹, Seung Jo Kim²

CMES-Computer Modeling in Engineering & Sciences, Vol.67, No.3, pp. 239-264, 2010, DOI:10.3970/cmes.2010.067.239

Abstract Large structural problems with high precision and complexity require a high-performance computation using the efficient parallel algorithm. The purpose of this paper is to present the parallel performance of thermal-structural coupled analysis tested on a parallel cluster system. In the coupled analysis, the heat transfer analysis is carried out, and then the structural analysis is performed based on temperature distribution. For the automatic and efficient connection of two parallel analysis modules, the several communication patterns were studied. The parallel performance was demonstrated for the sample and the real application problems, such as a laminated composite More >