B.C. Heng*, K.J. Vinoth*, K. Lu*, X. Deng*, Z. Ge*, B.H. Bay**, T. Cao*

BIOCELL, Vol.31, No.3, pp. 405-410, 2007, DOI:10.32604/biocell.2007.31.405

Abstract We investigated the effects of prolonged heat shock treatment on human embryonic stem cell (hESC) viability. The hESC viability steadily declined with longer exposure to heat shock treatment (43ºC). After 4 h of exposure to heat shock at 43ºC, only 56.2 ± 1.5% of cells were viable. Viability subsequently declined to 37.0 ± 3.3% and 3.5 ± 0.7% after 8 h and 16 h, respectively of heat shock treatment at 43ºC. Transmission electron micrographs showed that the morphology of the dead/dying cells after heat shock treatment was characteristic of cellular necrosis with an uncondensed chromatin… More >

Chih-Wen Chang¹, Chein-Shan Liu², Jiang-Ren Chang¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.3, No.2, pp. 69-80, 2007, DOI:10.3970/icces.2007.003.069

Abstract By using a quasi-boundary regularization we can formulate a two-point boundary value problem of the backward heat conduction equation. The ill-posed problem is analyzed by using the semi-discretization numerical schemes. Then, the resulting ordinary differential equations in the discretized space are numerically integrated towards the time direction by the Lie-group shooting method to find the unknown initial conditions. The key point is based on the erection of a one-step Lie group element G(T) and the formation of a generalized mid-point Lie group element G(r). Then, by imposing G(T) = G(r) we can seek the missing More >

Bohdan Mochnacki¹, Grażyna Kaluża²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.1, No.1, pp. 15-20, 2007, DOI:10.3970/icces.2007.001.015

Abstract This article has no abstract. More >

WU XueHong¹, SHEN ShengPing², TAO WenQuan^1,3

CMES-Computer Modeling in Engineering & Sciences, Vol.22, No.1, pp. 65-76, 2007, DOI:10.3970/cmes.2007.022.065

Abstract Meshless local Petrov-Galerkin collocation method is applied to compute two-dimensional heat conduction problems in irregular domain. By taking the Dirac's Delta function as the test function, the local domain integration is avoided. The essential boundary conditions can be implemented easily in this method. A case that has analytical solution shows the present method can obtain desired accuracy and efficient. Two cases in engineering are computed to validate the approach by comparing the present method with the finite volume method (FVM) solutions obtained from a commercial CFD package FLUENT 6.3. The results show that the present More >

Leevan Ling¹, Tomoya Takeuchi²

CMES-Computer Modeling in Engineering & Sciences, Vol.20, No.2, pp. 99-110, 2007, DOI:10.3970/cmes.2007.020.099

Abstract We aim to identify the unknown source locations in a two-dimensional heat equation from scattered measurements. In [Inverse Problems, 22(4):1289--1305, 2006], we proposed a numerical procedure that identifies the unknown source locations of 2D heat equation solely based on three measurement points. Due to the nonlinearity and complexity of the problem, the quality of the resulting estimations is often poor especially when the number of unknown is large. In this paper, we purpose a linear refinement scheme that takes the outputs of the existing nonlinear algorithm as initial guesses and iteratively improves on the accuracy More >

N. Osawa¹, K. Hashimoto¹, J. Sawamura¹, J. Kikuchi², Y. Deguchi², T. Yamaura²

CMES-Computer Modeling in Engineering & Sciences, Vol.20, No.1, pp. 43-54, 2007, DOI:10.3970/cmes.2007.020.043

Abstract A new hypothesis regarding heat transmission during line heating is proposed. It states that the distribution of the temperature of the gas adjacent to the plate, T_G, and the overall local heat transfer coefficient, α, depend only on the distance from the torch. An identification technique for T_G and α is developed. The validity of the employed hypothesis and the proposed technique is demonstrated by comparing the measured and identified T_G during a spot heating test. The plate temperature calculated by direct heat conduction analysis closely approximates the one measured for the spot and line heating tests, More >

Chein-Shan Liu¹, Li-Wei Liu², Hong-Ki Hong²

CMES-Computer Modeling in Engineering & Sciences, Vol.17, No.1, pp. 1-18, 2007, DOI:10.3970/cmes.2007.017.001

Abstract In this paper we are concerned with the parameters identification of the inverse heat conduction problems governed by linear parabolic partial differential equations (PDEs). It is the first time that one can construct a closed-form estimation method for the inverse thermal problems of estimating the spatial-dependent thermophysical parameters. The key points hinge on an establishment of a one-step group preserving scheme (GPS) for the semi-discretization of PDEs, as well as a closed-form solution of the resulting algebraic equations. The new method, namely the Lie-group estimation method, has four advantages: it does not require any prior More >

Srikrishna Sahu¹, K. Muralidhar¹, P.K. Panigrahi¹

FDMP-Fluid Dynamics & Materials Processing, Vol.3, No.3, pp. 265-286, 2007, DOI:10.3970/fdmp.2007.003.265

Abstract Convection in a differentially heated cavity partly filled with silicone oil has been experimentally studied. The air-oil layers are subjected to a temperature difference in the vertical direction, with the lower wall being heated with respect to the top. The overall geometry is that of an enclosed cavity that is octagonal in plan. Heights of oil layers considered for experiments correspond to 30, 50, and 70% of the vertical cavity dimension. Measurements have been carried out using a shadowgraph technique. A limited number of interferograms have also been recorded. The shadowgraph technique has been validated… More >

Kishore Visvanathan¹, Jeff Warren²

Canadian Journal of Urology, Vol.13, No.3, pp. 3156-3157, 2006

Abstract Changing chronic ureteral stents in patients with kidney transplants may be technically difficult because of the site of ureterocystostomy. The technique described simplifies this procedure. More >

Lutz EE, HD Merchán, AE Morant^*

Phyton-International Journal of Experimental Botany, Vol.75, pp. 85-89, 2006, DOI:10.32604/phyton.2006.75.085

Abstract Management of a double purpose wheat is not easy. Therefore, a simpler management alternative was studied: the mixture of two wheat varieties, one of long- cycle and the other one of short-cycle. Research was effected in the experimental field of the Asociación of Cooperativas Argentinas (38º 36´S, 61º 58´O and 122 m asl), 15 Km SW of Cabildo (Bs. As), in the semi-arid wheat subregion V S. At this place, forage and grain production of a suitable double-purpose wheat (ProINTA Pincén) was compared to its mixture with a short-cycle variety (Cooperación Calquín), either in the More >