Ja-Ryong Koo¹, Hye Min Park¹, Se Kyung Kim², Hyun Shik Yun^1,*

Journal of Renewable Materials, Vol.7, No.4, pp. 365-372, 2019, DOI:10.32604/jrm.2019.04170

Abstract Lactic acid is an important organic acid that is widely used in the food, pharmaceutical, and cosmetic industries. Lactic acid was produced from coffee ground waste which contains fermentable sugars and is increasingly generated from our daily dietary life. Among 114 strains of Lactobacillus species, Lactobacillus rhamnosus ATCC 10863 was selected for the production of lactic acid from coffee ground waste. Through alkali pretreatment and saccharification, cellulose and hemicellulose in coffee ground waste were converted into fermentable sugars. Pretreatment experiments were conducted at various alkali solution, concentrations, and times. Alkali pretreatment with 35 g/L… More >

Laura Ribba, Jonathan Cimadoro, Silvia Goyanes^*

Journal of Renewable Materials, Vol.7, No.4, pp. 355-363, 2019, DOI:10.32604/jrm.2019.04083

Abstract In this work, conductive polymer nanocomposites were developed based on a biodegradable and biobased polymer (poly (lactic acid)), with the incorporation of only 0.3 wt% of carbon nanotubes (CNTs) to be used as volatile solvent sensors. The correct dispersion of the nanofiller was achieved thanks to a CNT non-covalent modification with an azo-dye (disperse orange 3) which allowed to reach the percolation for electric conduction in values as low as 0.3 wt%. The chemo-resistive properties of the developed sensors were investigated by exposure to organic vapors (ethanol, tetrahydrofuran and toluene) and water vapor, showing More >

Fatma Kharrat¹, Rania Chaari¹, Mohamed Khlif¹, Loic Hilliou², José A. Covas², Mohamed Haboussi^3,*, Hedi Nouri¹, Chedly Bradai¹

Journal of Renewable Materials, Vol.7, No.9, pp. 891-901, 2019, DOI:10.32604/jrm.2019.06827

Abstract Biocomposite films prepared with melt compounding and film blowing have become a new trend in plastic research to deliver more eco-friendly packages. Polylactic acid (PLA) was melt compounded with minimally processed date palm leaf fiber (DPLF) and converted into films by blown film extrusion. The compounding was done in order to enhance the film mechanical properties in one hand, and to decrease the film production cost in the other hand. In this present study, a reference PLA film and films with 1%, 2%, and 5% of DPLF (weight %) were produced with different process parameters.… More >

Paula do Patrocínio Dias, Marcelo Aparecido Chinelatto^*

Journal of Renewable Materials, Vol.7, No.2, pp. 129-138, 2019, DOI:10.32604/jrm.2019.00037

Abstract In this study a low molecular weight triblock copolymer derived from ε-caprolactone and tetrahydrofuran was used as a non-reactive compatibilizer of immiscible PLA/PCL blends. Ternary blends with 0, 1.5 wt%, 3 wt% and 5 wt% copolymer and about 75 wt% PLA were prepared by single screw extrusion and characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), tensile and Izod impact testing. SEM micrographs showed that the size of the dispersed PCL domains was practically constant regardless of copolymer concentration. This result can be explained by the low shear rate More >

Galia Moreno, Karla Ramirez, Marianelly Esquivel, Guillermo Jimenez*

Journal of Renewable Materials, Vol.7, No.1, pp. 9-20, 2019, DOI:10.32604/jrm.2019.00017

Abstract Poly(lactic acid) (PLA) composite films reinforced with microcrystalline cellulose (MCC) extracted from pineapple leaf fibers (PALF) were prepared by a solution casting procedure. In an attempt to improve the interaction between PLA and cellulose, two approaches were adopted; first, poly(ethylene glycol) (PEG) was used as a surfactant, and second, the cellulosic fibers were pre-treated using tert-butanol (TBA). Lignocellulosic and cellulosic substrates were characterized using Fourier transform infrared (FTIR), wide-angle X-ray scattering (WAXS), and thermogravimetrical analysis (TGA). MCC from PALF showed good thermal stability, left few residues after decomposing, and exhibited high crystallinity index. Mechanical, thermal More >

T. Côto¹, I. Moura¹, A. de Sá^1,*, C. Vilarinho², A. V. Machado¹

Journal of Renewable Materials, Vol.6, No.7, pp. 688-696, 2018, DOI:10.32604/JRM.2018.00006

Abstract Biopolymers exhibit unique properties and can be produced from plants’ and crops’ wastes. Cellulose has been used for the production of sustainable materials, nevertheless due to the difficulty inherent to its extraction, several methods have been studied in order to optimize the process. Therefore, this paper reports the extraction of natural polymers from food sector agro-food wastes, including cellulose, following a green chemistry aproach. The cellulose extracted from pumpkin peel was acetylated and dispersed in a polylactic acid (PLA) matrix. The developed materials were characterized in terms of their structure, morphology and thermal stability. The More >

Phornwalan Nanthananon¹, Manus Seadan², Sommai Pivsa-Art³, Hiroyuki Hamada⁴, Supakij Suttiruengwong^1,*

Journal of Renewable Materials, Vol.6, No.6, pp. 573-583, 2018, DOI:10.32604/JRM.2018.00129

Abstract Poor interfacial adhesion between biobased thermoplastics and natural fibers is recognized as a major drawback for biocomposites. To be applicable for the large-scale production, a simple method to handle is of importance. This work presented poly(lactic acid) (PLA) reinforced with short-fiber and three reactive agents including anhydride and epoxide groups were selected as compatibilizers. Biocomposites were prepared by one-step melt-mixing methods. The influence of reactive agents on mechanical, dynamic mechanical properties and morphology of PLA biocomposites were investigated. Tensile strength and storage modulus of PLA biocomposites incorporated with epoxide-based reactive agent was increased 13.9% and More >

Ragab E. Abou-Zeid^1*, Mohamed A. Diab¹, Salah A. A. Mohamed², Ahmed Salama¹, Hind Abdullah Aljohani³, Kamel Rizq Shoueir⁴

Journal of Renewable Materials, Vol.6, No.4, pp. 394-401, 2018, DOI:10.7569/JRM.2017.634156

Abstract The current article addresses a new strategy for the preparation of polylactic acid/cellulose nanocrystal (PLA/CNCs) nanobiocomposite films with improved structural morphology, mechanical and barrier properties for food packaging applications. The addition of hexadecyltrimethylammonium bromide (CTAB) and sodium lauryl sulfate (SLS) as cationic and anionic surfactants respectively, was found to play a crucial role in preventing re-aggregation of the CNCs during drying and improving the dispersion of CNCs in the PLA. The coated paper was characterized using mechanical tests, water vapor permeability (WVP), X-ray diffraction (XRD), scanning electron microscopy (SEM) and air permeability. The results showed More >

Charlotte Grosse^1,2,*, Marion Noël¹, Marie-France Thévenon³, Lauri Rautkari⁴, Philippe Gérardin²

Journal of Renewable Materials, Vol.6, No.3, pp. 259-269, 2018, DOI:10.7569/JRM.2017.634176

Abstract Impregnation of dry wood with pure lactic acid oligomers (OLAs) followed by heat treatment confers promising properties to wood because of OLA's good diffusion, in-situ polymerization and persistence in cell walls. Treatment provides drastic reduction of the equilibrium moisture content, high dimensional stability and good durability. The presence of water during treatment has been evaluated. Curing of OLA impregnated dry wood in humid atmosphere leads to a strong and global degradation of the material. OLA treatment of wet wood only impacts the water leaching rate negatively. Treatment of dry wood with OLA diluted in water More >

Mfiso Emmanuel Mngomezulu¹, Adriaan Stephanus Luyt², Steve Anthony Chapple³, Maya Jacob John^3,4*

Journal of Renewable Materials, Vol.6, No.1, pp. 26-37, 2018, DOI:10.7569/JRM.2017.634140

Abstract This work reports on the effect of commercial expandable graphite (EG) on the flammability and thermal decomposition properties of PLA-starch blend. The PLA-starch/EG composites were prepared by melt-mixing and their thermal stability, volatile pyrolysis products and flammability characteristics were investigated. The char residues of the composites, after combustion in a cone calorimeter, were analyzed with environmental scanning electron microscopy (ESEM). The thermal decomposition stability of the composites improved in the presence of EG. However, the char content was less than expected as per the combination of the wt% EG added into PLA-starch and the %… More >