G. Haasemann¹, M. Kästner², V. Ulbricht³

CMES-Computer Modeling in Engineering & Sciences, Vol.42, No.1, pp. 35-58, 2009, DOI:10.3970/cmes.2009.042.035

Abstract The purpose of this paper is the presentation of a new efficient modelling strategy based on the combination of Binary Model and Extended Finite Element Method (X-FEM). It is applied to represent the internal architecture of textile reinforced composites where the resin-saturated fabric is characterised by a complex geometry. Homogenisation methods are used to compute the effective elastic material properties. Thereby, the discrete formulation of periodic boundary conditions is adapted regarding additional degrees of freedom used by finite elements which are based on the X-FEM. Finally, the results in terms of effective material properties reveal More >

S.H. Pyo¹, H.K. Lee^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.40, No.3, pp. 271-306, 2009, DOI:10.3970/cmes.2009.040.271

Abstract This paper presents a micromechanical approach for predicting the elastic and multi-level damage response of aligned and randomly oriented whisker-/ short fiber-reinforced composites. Based on a combination of Eshelby's micromechanics and the evolutionary imperfect interface approach, the effective elastic moduli of the composites are derived explicitly. The modified Eshelby's tensor for spheroidal inclusions with slightly weakened interface [Qu (1993b)] is extended in the present study to model whiskers or short fibers having mild or severe imperfect interfaces. Aligned and random orientations of spheroidal reinforcements are considered. A multi-level damage model in accordance with the Weibull's More >

D. S. Liu¹, C.Y. Tsai¹

CMES-Computer Modeling in Engineering & Sciences, Vol.39, No.1, pp. 29-48, 2009, DOI:10.3970/cmes.2009.039.029

Abstract Utilizing a thin copper substrate for illustration purposes, this study presents a novel numerical method for extracting the thermo-mechanical properties of a thin-film. In the proposed approach, molecular dynamics (MD) simulations are performed to establish the load-displacement response of a thin copper substrate nanoindented at temperatures ranging from 300~1400 K. The load data are then input to an artificial neural network (ANN), trained using a finite element model (FEM), in order to extract the material constants of the copper substrate. The material constants are then used to construct the corresponding stress-strain curve, from which the… More >

D.T. Fullwood¹, S.R. Kalidindi², B.L. Adams¹, S. Ahmadi¹

CMC-Computers, Materials & Continua, Vol.9, No.1, pp. 25-40, 2009, DOI:10.3970/cmc.2009.009.025

Abstract Localization relations arise naturally in the formulation of multi-scale models. They facilitate statistical analysis of local phenomena that may contribute to failure related properties. The computational burden of dealing with such relations is high and recent work has focused on spectral methods to provide more efficient models. Issues with the inherent integrations in the framework have led to a tendency towards calibration-based approaches. In this paper a discrete Fourier transform framework is introduced, leading to an extremely efficient basis for the localization relations. Previous issues with the Green's function integrals are resolved, and the method More >

Q. S. Yang¹, B. S. Liu, L. T. Meng

CMC-Computers, Materials & Continua, Vol.12, No.1, pp. 39-56, 2009, DOI:10.3970/cmc.2009.012.039

Abstract Coupling and interaction of multi-physical fields exist in hydrogel consisting of a fluid and a solid under external stimulus. In this paper, a phenomenological theory for chemo-mechanical coupling behavior and finite element formulation are developed, based on the thermodynamic laws. The free energy function is constructed and used to derive the constitutive equations and governing equations for a linear coupling system including a chemical effect. Equivalent integral forms of the governing equations and coupled finite element equations are obtained by a variational principle. Numerical examples demonstrate the interaction of chemical and mechanical effects of hydrogel More >

D. S. Liu¹, C. Y. Tsai¹, S. R. Lyu²

CMC-Computers, Materials & Continua, Vol.11, No.2, pp. 147-164, 2009, DOI:10.3970/cmc.2009.011.147

Abstract This study presents a novel numerical method for extracting the tempe -rature-dependent mechanical properties of the gold and aluminum thin-films. In the proposed approach, molecular dynamics (MD) simulations are performed to establish the load-displacement response of the thin substrate nanoindented at temperatures ranging from 300-900 K. A simple but effective procedure involving genetic algorithm (GA) and finite element method (FEM) is implemented to extract the material constants of the gold and aluminum substrates. The material constants are then used to construct the corresponding stress-strain curve, from which the elastic modulus, yield stress and the tangent More >

Hsien-Chie Cheng¹, Yu-Chen Hsu², Wen-Hwa Chen²

CMC-Computers, Materials & Continua, Vol.11, No.2, pp. 127-146, 2009, DOI:10.3970/cmc.2009.011.127

Abstract Due to the limitation of fabrication technologies nowadays, structural or atomistic defects are often perceived in carbon nanotubes (CNTs) during the manufacturing process. The main goal of the study aims at providing a systematic investigation of the effects of atomistic defects on the nanomechanical properties and fracture behaviors of single-walled CNTs (SWCNTs) using molecular dynamics (MD) simulation. Furthermore, the correlation between local stress distribution and fracture evolution is studied. Key parameters and factors under investigation include the number, type (namely the vacancy and Stone-Wales defects), location and distribution of defects. Results show that the nanomechanical More >

Yeau-Ren Jeng¹,Ping-Chi Tsai¹,Guo-Zhe Huang¹, I-Ling Chang¹

CMC-Computers, Materials & Continua, Vol.11, No.2, pp. 109-126, 2009, DOI:10.3970/cmc.2009.011.109

Abstract This study performs a series of Molecular Dynamics (MD) and Molecular Statics (MS) simulations to investigate the mechanical properties of single-walled carbon nanotubes (SWCNTs) under a uniaxial tensile strain. The simulations focus specifically on the effects of the nanotube helicity, the nanotube diameter and the percentage of vacancy defects on the bond length, bond angle and tensile strength of zigzag and armchair SWCNTs. In this study, a good agreement is observed between the MD and MS simulation results for the stress-strain response of the SWCNTs in both the elastic and the plastic deformation regimes. The… More >

B Keerthika¹, Y P Cao², D Raabe¹

CMC-Computers, Materials & Continua, Vol.10, No.3, pp. 243-258, 2009, DOI:10.3970/cmc.2009.010.243

Abstract In this study, effects of the plastic deformation and the time-dependent deformation behavior on the fundamental relations in the Oliver & Pharr method are studied by using finite element analysis based on a viscoelastic-plastic model developed for polymers. The study eventually yields an experimental protocol and using which, the instantaneous modulus of the viscoelastic-plastic materials may be reliably determined. Experiments have been performed on four polymers to verify the conclusions from the numerical analysis. More >

F Gentil¹, RM Natal Jorge^2,3, AJM Ferreira⁴, MPL Parente^2,5, PALS Martins^2,6, E Almeida⁷

The International Conference on Computational & Experimental Engineering and Sciences, Vol.8, No.4, pp. 145-150, 2008, DOI:10.3970/icces.2008.008.145

Abstract The ear can be divided anatomically, into three parts: external, middle, and inner ear. The eardrum separates the external from the middle ear. The perforation of the eardrum can result in conductive moderate hearing loss. More >