D. Ballhause¹, M. König¹, B. Kröplin¹

CMC-Computers, Materials & Continua, Vol.4, No.1, pp. 21-30, 2006, DOI:10.3970/cmc.2006.004.021

Abstract The mechanical behaviour of woven fabrics is dominated by the kinematics of the constituents on the microscopic scale. Their macroscopic response usually shows non-linearities which are due to the mobility of the interlaced yarns. The major deformation mechanisms of fabrics, i.e. the crimp interchange in case of biaxial tension and the trellising motion of the yarns in case of shear, reflect the dependency of the macroscopic material behaviour on the microstructural deformation mechanisms.
We present a novel modelling approach for woven fabrics which is capable to represent directly and locally the microstructure and its kinematics… More >

G. Haasemann¹, M. Kästner¹ and V. Ulbricht¹

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 131-146, 2006, DOI:10.3970/cmc.2006.003.131

Abstract Novel textile reinforced composites provide an extremely high adaptability and allow for the development of materials whose features can be adjusted precisely to certain applications. A successful structural and material design process requires an integrated simulation of the material behavior, the estimation of the effective properties which need to be assigned to the macroscopic model and the resulting features of the component. In this context two efficient modelling strategies - the Binary Model (Carter, Cox, and Fleck (1994)) and the Extended Finite Element Method (X-FEM) (Moës, Cloirec, Cartraud, and Remacle (2003)) - are used to… More >

I. Smojver¹, J. Sorić²

CMC-Computers, Materials & Continua, Vol.3, No.1, pp. 13-24, 2006, DOI:10.3970/cmc.2007.003.013

Abstract The paper addresses the problem of impact on layered fibre composites. The behaviour of composite laminates under impact loading is dependent not only on the velocity but also on the mass and geometry of the impactor. Using micromechanical Mori-Tanaka approach, mechanical properties of the laminate have been calculated utilizing the material constants of the fibre and matrix. General purpose FEM software ABAQUS has been modified by means of user written subroutines for modelling of composite laminate and rigid impactor. The kinematics of the impact has been simulated using transient dynamic analysis. Employing user defined multi More >

A. P. S. Selvadurai¹, Q. Yu²

CMES-Computer Modeling in Engineering & Sciences, Vol.9, No.1, pp. 85-110, 2005, DOI:10.3970/cmes.2005.009.085

Abstract A characteristic feature of a polymeric material such as PVC is its hyperelasticity or the ability to experience large strains prior to failure. The exposure of PVC to chemicals such as acetone and ethanol results in embrittlement or the loss of the hyperelasticity property. In this paper, we examine the mechanical behaviour of a PVC membrane that has been exposed to ethanol. Due to leaching of the plasticizer, the constitutive response of the PVC changes from a hyperelastic material to a hardened material that displays dominant yield behaviour and particularly one that is capable of… More >

S.K. Pal¹, D.A. Linkens²

CMC-Computers, Materials & Continua, Vol.2, No.2, pp. 113-118, 2005, DOI:10.3970/cmc.2005.002.113

Abstract In hot rolling, the final thickness of the strip is achieved through plastic deformation of the original stock by a series of counter-rotating rollers. In this work, static recrystallization kinetics in between two stages of steel rolling has been modelled, and simulation studies have also been performed to find out the effect of entry temperature on the recrystallization kinetics. A viable bond graph model has been developed to study the kinetics of the process. Low-carbon steel has been considered for this purpose. More >

G. Himpel, E. Kuhl, A. Menzel, P. Steinmann¹

CMES-Computer Modeling in Engineering & Sciences, Vol.8, No.2, pp. 119-134, 2005, DOI:10.3970/cmes.2005.008.119

Abstract The changing mass of biomaterials can either be modelled at the constitutive level or at the kinematic level. This contribution attends on the description of growth at the kinematic level. The deformation gradient will be multiplicatively split into a growth part and an elastic part. Hence, in addition to the material and the spatial configuration, we consider an intermediate configuration or grown configuration without any elastic deformations. With such an ansatz at hand, contrary to the modelling of mass changes at the constitutive level, both a change in density and a change in volume can More >

M.C. Ho Ba Tho¹

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.3&4, pp. 489-496, 2003, DOI:10.3970/cmes.2003.004.489

Abstract The objective of the paper is to address the methodology developed to model bone and joints with individualised geometric and material properties from medical image data. An atlas of mechanical properties of human bone has been investigated demonstrating individual differences. From these data, predictive relationships have been established between mechanical properties and quantitative data derived from measurements on medical images. Subsequently, geometric and numerical models of bones with individualised geometrical and mechanical properties have been developed from the same source of image data. The advantages of this modelling technique are its ability to study the More >

K. Garikipati¹, V.S. Rao², M.Y. Hao³, E. Ibok⁴, I. de Wolf⁵, R. W. Dutton⁶

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.1, pp. 65-84, 2000, DOI:10.3970/cmes.2000.001.065

Abstract This work is based upon a careful rendering of mechanics and mathematics to describe the phenomena that influence the stress engendered by the Shallow Trench Isolation process. The diffusion-reaction problem is posed in terms of fundamental mass balance laws. Finite strain kinematics is invoked to model the large expansion of SiO₂, dielectrics are modelled as viscoelastic solids and annealing-induced density relaxation of SiO₂ is incorporated as a history-dependent process. A levelset framework is used to describe the moving Si/SiO₂ interface. Sophisticated finite element methods are employed to solve the mathematical equations posed for each phenomenon. These include More >

S. Taschini¹, J. Müller², A. Greiner², M. Emmenegger¹, H. Baltes¹, J.G. Korvink²

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.1, pp. 31-44, 2000, DOI:10.3970/cmes.2000.001.031

Abstract We present three techniques to accurately model the thermomechanical response of microsystem components: a new, accurate and stable Kirchhoff-Love multi-layered plate model implemented as an Argyris finite element, a model for the amplitude fluctuations of vibrational modes in micro-mechanical structures within a gaseous environment, and the consistent refinement of a finite element mesh in order to maximize the computational accuracy for a given mesh size. We have implemented these techniques in our in-house MEMS finite element program and accompanying Monte Carlo simulator. We demonstrate our approach to dynamic modeling by computing the thermomechanical response of More >