Miao He^1,2, Yihang Zhang^1,*, Mingbiao Xu^1,2,*, Jun Li³

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.5, pp. 1031-1046, 2020, DOI:10.32604/fdmp.2020.011145 - 09 October 2020

Abstract This study presents a new multiphase flow model with transient heat transfer and pressure coupling to simulate HTHP (high temperature and high pressure) sour gas “kicks” phenomena. The model is intended to support the estimation of wellbore temperature and pressure when sour gas kicks occur during drilling operation. The model considers sour gas solubility, phase transition and effects of temperature and pressure on the physical parameters of drilling fluid. Experimental data for a large-diameter pipe flow are used to validate the model. The results indicate that with fluid circulation, the annulus temperature with H₂S kicks is… More >

Lennon Ó Náraigh^{1, *}, Daniel R. Jansen van Vuuren²

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.2, pp. 383-410, 2020, DOI:10.32604/fdmp.2020.09265 - 21 April 2020

Abstract In this article we use analytical and numerical modeling to describe parallel viscous two-phase flows in microchannels. The focus is on idealized two-dimensional geometries, with a view to validating the various methodologies for future work in three dimensions. In the first instance, we use analytical Orr-Sommerfeld theory to describe the linear instability which governs the formation of small-amplitude waves in such systems. We then compare the results of this analysis with an in-house Computational Fluid Dynamics (CFD) solver called TPLS. Excellent agreement between the theoretical analysis and TPLS is obtained in the regime of small-amplitude More >

Jingfa Li^1,2, Shuyu Sun^2,*, Bo Yu¹, Yang Liu², Tao Zhang²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.22, No.3, pp. 141-142, 2019, DOI:10.32604/icces.2019.04721

Abstract The multiphase fluid flow in porous media is one of the most fundamental phenomena in various physical processes, such as oil/gas flow in reservoir, subsurface contamination dispersion, chemical separation, etc. Due to its importance, the efficient and accurate solution and prediction of multiphase flow in porous media is highly required in engineering applications and mechanism studies, which has been a research hot spot with increasing interest in recent years. However, the strong nonlinearity implicated in the multiphase flow model has brought great challenges for the computation and analysis. In addition, the permeability in Darcy-type pressure… More >

Liang Yang^1,*, Andrew Buchan², Alan Jones¹, Paul Smith¹, Mikio Sakai³, Christopher Pain¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.22, No.1, pp. 95-95, 2019, DOI:10.32604/icces.2019.05077

Abstract In the event of a severe accident, a large part of the core may collapse and form a debris bed. Debris bed coolability is important to avoid releasing the radioactive materials to the environment. If it is not rapidly cooled, the debris bed will begin to melt and become harder to cool. To stop or slow down the accident evolution, the main approach is to inject water into the reactor core. However, the success of the cooling is not guaranteed depending on the debris bed and the operating condition. This procedure is challenging to understand… More >

Davood Kalantari¹

FDMP-Fluid Dynamics & Materials Processing, Vol.9, No.2, pp. 169-182, 2013, DOI:10.3970/fdmp.2013.009.169

Abstract In this study, a critical summary of existing spray/wall interaction models is given in synergy with a review of available experimental data. In particular, special attention is devoted to the limitations, difficulties and complexities of the most used approaches in the literatures. An attempt is also made to indicate the bottlenecks and criticalities which typically arise when investigators try to extend results obtained for isolated droplets to the more complex dynamics produced by spray impacts. More >

S. Oukach^1,2,3, H. Hamdi², M. El Ganaoui⁴, B. Pateyron¹

FDMP-Fluid Dynamics & Materials Processing, Vol.8, No.2, pp. 173-196, 2012, DOI:10.3970/fdmp.2012.008.173

Abstract The splat formation is one of the basic processes in thermal spray coatings. The performance of these coatings is strongly related to the process of spreading and solidification of molten droplets. The aim of the present paper is to simulate the fluid flow, heat transfer and phase-change that occur when a micrometric molten droplet impacts onto a rigid substrate and to examine the effect of the substrate conditions, such as initial temperature and material on the solidification time and spreading process. The effect of thermal contact resistance is also investigated. The simulation model used is More >

M. Do-Quang¹, A. Carlson¹, G. Amberg¹

FDMP-Fluid Dynamics & Materials Processing, Vol.7, No.4, pp. 389-402, 2011, DOI:10.3970/fdmp.2011.007.389

Abstract Inkjet technology has been recognized as one of the most successful and promising micro-system technologies. The wide application areas of printer heads and the increasing demand of high quality prints are making ink consumption and print see-through important topics in the inkjet technology. In the present study we investigate numerically the impact of ink droplets onto a porous material that mimics the paper structure. The mathematical framework is based on a free energy formulation, coupling the Cahn-Hilliard and Navier Stokes equations, for the modelling of the two-phase flow. The case studied here consists of a More >

K. Le-Cao¹, N. Mai-Duy¹, C.-D. Tran¹, T. Tran-Cong¹

CMES-Computer Modeling in Engineering & Sciences, Vol.67, No.3, pp. 265-294, 2010, DOI:10.3970/cmes.2010.067.265

Abstract In this paper, radial basis functions are utilised for numerical prediction of the bulk properties of particulate suspensions under simple shear conditions. The suspending fluid is Newtonian and the suspended particles are rigid. Results obtained are compared well with those based on finite elements in the literature. More >

Mark Sussman¹, Mitsuhiro Ohta²

FDMP-Fluid Dynamics & Materials Processing, Vol.3, No.1, pp. 21-36, 2007, DOI:10.3970/fdmp.2007.003.021

Abstract In this paper, we describe new techniques for numerically approximating two-phase flows. Specifically, we present new techniques for treating the viscosity and surface tension terms that appear in the Navier-Stokes equations for incompressible two-phase flow. Our resulting numerical method has the property that results computed using our two-phase algorithm approach the corresponding "one-phase'' algorithm in the limit of zero gas density/viscosity; i.e. the two-phase results approach the one-phase free-boundary results in the limit that the gas is assumed to become a uniform pressure void. By grid convergence checks and comparison with previous experimental data, we More >

Marcello Lappa¹

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.3, pp. 213-234, 2005, DOI:10.3970/fdmp.2005.001.213

Abstract The physical properties of many emulsions and metal alloys strongly depend on the multiphase morphology which is controlled to a great degree by particle-particle interaction during the related processing. In the present article significant effort is devoted to illustrate the philosophy of modeling for these phenomena and some insights into the physics. Within such a context working numerical techniques that have enjoyed a widespread use over recent years are presented and/or reviewed. Finally a focused and critical comparison of these possible approaches is reported illustrating advantages and disadvantages, strengths and weaknesses, past history and future More >