Zehba A. S. Raizah¹, Abdelraheem M. Aly^1,2,*

CMC-Computers, Materials & Continua, Vol.66, No.3, pp. 3233-3251, 2021, DOI:10.32604/cmc.2021.012402

Abstract This study simulates natural convection flow resulting from heat partitions in an H-shaped enclosure filled with a nanofluid using an incompressible smoothed particle hydrodynamics (ISPH) method. The right area of the H-shaped enclosure is saturated with non-Darcy porous media. The center variable partitions of the H-shaped enclosure walls are kept at a high-temperature T_h. The left and right walls of the H-shaped enclosure are positioned at a low temperature T_c and the other walls are adiabatic. In ISPH method, the source term in pressure Poisson equation (PPE) is modified. The influences of the controlling parameters on the temperature distributions, the… More >

Latifa M. Al-Balushi, M. M. Rahman^*

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.3, pp. 441-463, 2020, DOI:10.32604/fdmp.2020.08551

Abstract In the present paper, the effect of the heat flux distribution on the natural convective flow inside a square cavity in the presence of a sloping magnetic field and magnetic nanoparticles is explored numerically. The nondimensional governing equations are solved in the framework of a finite element method implemented using the Galerkin approach. The role played by numerous model parameters in influencing the emerging thermal and concentration fields is examined; among them are: the location of the heat source and its lengthH*, the magnitude of the thermal Rayleigh number, the nanoparticles shape and volume fraction, and the Hartmann number. It… More >

Suvash C. Saha^1,*, Ali M. Sefidan², Atta Sojoudi³

Energy Engineering, Vol.117, No.1, pp. 1-17, 2020, DOI:10.32604/EE.2020.010418

Abstract Free convection inside an attic enclosure in which sinusoidal heat flux applied on the inclined walls and a constant temperature applied on the base wall has been investigated numerically to demonstrate the primary flow characteristics and heat transfer within the attic enclosure over daily routine cycles. To solve the governing equations, the finite volume technique has been utilized. After performing the grid independency and time step size tests, the roles of Rayleigh number (Ra) and the attic aspect ratio (AR) on the unsteady flow structure and heat transfer phenomenon are explained for a constant Prandtl number (0.72) for the air.… More >

Janja Kramer, Renata Jecl, Leopold Skerget

The International Conference on Computational & Experimental Engineering and Sciences, Vol.12, No.4, pp. 147-148, 2009, DOI:10.3970/icces.2009.012.147

Abstract A numerical study of double diffusive natural convection in porous media due to opposing buoyancy forces is reported, using the Boundary Domain Integral Method (BDIM). There have been several reported studies dealing with natural convection in porous media, mainly because of its importance in several industrial and technological applications. Less attention, however, has been dedicated to the so-called double diffusive problems, where density gradients occur due to the effects of combined temperature and concentration buoyancy. The current investigation is focused on the special problem, where the thermal and solutal buoyancy forces are opposing each other.
The mathematical model of fluid… More >

B. Šarler¹

CMES-Computer Modeling in Engineering & Sciences, Vol.7, No.2, pp. 185-194, 2005, DOI:10.3970/cmes.2005.007.185

Abstract This paper explores the application of the mesh-free radial basis function collocation method for solution of heat transfer and fluid flow problems. The solution procedure is represented for a Poisson reformulated general transport equation in terms of a-symmetric, symmetric and modified (double consideration of the boundary nodes) collocation approaches. In continuation, specifics of a primitive variable solution procedure for the coupled mass, momentum, and energy transport representing the natural convection in an incompressible Newtonian Bussinesq fluid are elaborated. A comparison of different collocation strategies is performed based on the two dimensional De Vahl Davis steady natural convection benchmark with Prandtl… More >

H. Imtiaz¹, F. M. Mahfouz²

CMES-Computer Modeling in Engineering & Sciences, Vol.108, No.3, pp. 171-192, 2015, DOI:10.3970/cmes.2015.108.171

Abstract This paper investigates numerically the conjugate heat transfer in a concentric enclosure that is formed between two concentric cylinders and filled with micropolar fluid. The wall of inner cylinder is considerably thick, while the wall of outer cylinder is very thin. The inner cylinder is heated from inner side through constant heat flux, whereas the outer cylinder is cooled and maintained at constant temperature. The induced buoyancy driven flow and associated conjugate heat transfer are predicted numerically by solving flow and energy governing equations considering a combination of finite difference and Fourier spectral methods. The study investigates the effect of… More >

K. Mramor¹, R. Vertnik^2,3, B. Šarler^1,3,4,5

CMES-Computer Modeling in Engineering & Sciences, Vol.92, No.4, pp. 327-352, 2013, DOI:10.3970/cmes.2013.092.327

Abstract The purpose of the present paper is to extend and explore the application of a novel meshless Local Radial Basis Function Collocation Method (LRBFCM) in solution of a steady, laminar, natural convection flow, influenced by magnetic field. The problem is defined by coupled mass, momentum, energy and induction equations that are solved in two dimensions by using local collocation with multiquadrics radial basis functions on an overlapping five nodded subdomains and explicit time-stepping. The fractional step method is used to couple the pressure and velocity fields. The considered problem is calculated in a square cavity with two insulated horizontal and… More >

T.-T. Hoang-Trieu¹, N. Mai-Duy¹, C.-D. Tran¹, T. Tran-Cong¹

CMES-Computer Modeling in Engineering & Sciences, Vol.91, No.6, pp. 485-516, 2013, DOI:10.3970/cmes.2013.091.485

Abstract In this paper, compact local integrated radial basis function (IRBF) stencils reported in [Mai-Duy and Tran-Cong (2011) Journal of Computational Physics 230(12), 4772-4794] are introduced into the finite-volume / subregion - collocation formulation for the discretisation of second-order differential problems defined on rectangular and non-rectangular domains. The problem domain is simply represented by a Cartesian grid, over which overlapping compact local IRBF stencils are utilised to approximate the field variable and its derivatives. The governing differential equation is integrated over non-overlapping control volumes associated with grid nodes, and the divergence theorem is then applied to convert volume integrals into surface/line… More >

Taoufik Naffouti^1,2 and Ridha Djebali^1,3

CMES-Computer Modeling in Engineering & Sciences, Vol.88, No.3, pp. 211-228, 2012, DOI:10.3970/cmes.2012.088.211

Abstract This paper reports numerical results of natural convection flow evolving inside confined medium defined by two-dimensional square enclosure containing isothermal hot source placed asymmetrically at bottom wall. The sides-walls are isothermally cooled at a constant temperature; however the ceiling and the rest of bottom wall are insulated. The lattice Boltzmann method is used to solve the dimensionless governing equations with the associated boundary conditions. The flow is monitored by the Grashof number and the Prandtl number taken here 0.71. Numerical simulations are performed to study the effects of Grashof number ranging from 104 to 106, hot source length from 0.1… More >

Wei-Chung Tien¹, Yue-Tzu Yang¹, Cha’o-Kuang Chen^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.85, No.5, pp. 447-462, 2012, DOI:10.3970/cmes.2012.085.447

Abstract Both buoyancy effects of thermal and mass diffusion in the natural convection flow about a vertical plate are considered in this paper. The non-linear coupled differential governing equations for velocity, temperature and concentration fields are solved by using the homotopy analysis method. Without the need of iteration, the obtained solution is in the form of an infinite power series which indicates those series have high accuracy when comparing it with other-generated by the traditional method. The impact of the Prandtl number, Schmidt number and the buoyancy parameter on the flow are widely discussed in detail. More >