N. Laaroussi^1*, Y. Chihab¹, M. Garoum¹, L-V. Bénet², F. Lacroux³

FDMP-Fluid Dynamics & Materials Processing, Vol.11, No.4, pp. 354-365, 2015, DOI:10.3970/fdmp.2015.011.354

Abstract This study is based on the modeling of the air flow in the hall building including heating and air-conditioning systems. The building contains two converter stations “valves” considered as heat sources. Heat transfer in the hall is numerically simulated using the standard k-ε model of turbulence. For a very hot weather, this study aims to evaluate the local temperatures in the ambient air of the hall, with assuming running valves and air conditioning device in open loop with a 35°C inlet temperature. The study has shown that the air conditioning is efficient enough to maintain More >

P. Pasolini^1,2, R. Savino¹, F. Franco¹, S. De Rosa¹

FDMP-Fluid Dynamics & Materials Processing, Vol.11, No.3, pp. 301-324, 2015, DOI:10.3970/fdmp.2015.011.301

Abstract The aim of the present work is to provide a first attempt to set an aero-thermo-elastic methodology for deployable atmospheric re-entry decelerators operating at high Mach number and high dynamic pressure. Because of the severity of re-entry conditions such as high temperatures, high pressures and high velocities, the behavior of their flexible structures is a hard target to assess. In this paper a partitioned Fluid Structure Interaction (FSI) approach based on the integration of different commercial software (STAR-CCM+ and ABAQUS) is presented. In order to validate the specific codes and the overall strategy for structural More >

M. Marin^1,2, A.M. Abd-Alla^3,4, D. Raducanu¹, S.M. Abo-Dahab^3,5

CMC-Computers, Materials & Continua, Vol.45, No.2, pp. 107-126, 2015, DOI:10.3970/cmc.2015.045.107

Abstract Our study is dedicated to mixed initial boundary value problem for porous micropolar bodies. We prove that the solution of this problem depends continuously on coefficients which couple the micropolar deformation equations with the equations that model the evolution of voids. The evaluation of this dependence is made by using an appropriate measure. More >

S.D. Akbarov^1,2, M.I. Ismailov³

CMC-Computers, Materials & Continua, Vol.45, No.2, pp. 75-106, 2015, DOI:10.3970/cmc.2015.045.075

Abstract The subject of the paper is the study of the dynamics of the moving load acting on the hydro-elastic system consisting of the elastic plate, compressible viscous fluid and rigid wall. Under this study the motion of the plate is described by linear elastodynamics, and the motion of the compressible viscous fluid is described by the linearized Navier-Stokes equations. Numerical results are obtained for the case where the material of the plate is steel, but the fluid material is Glycerin. According to these results, corresponding conclusions related to the influence of the problem parameters, such More >

Pérez Cuadra V y PM Hermann

Phyton-International Journal of Experimental Botany, Vol.83, pp. 369-377, 2014, DOI:10.32604/phyton.2014.83.369

Abstract Species belonging to the tribe Salicornieae (Chenopodiaceae), called jumes, are rich in salts, reflecting its halophytic nature. The leaf and stem anatomy of Allenfolfea patagonica, Heterostachys olivascens and H. ritteriana were studied. The material, collected in the Salitral de la Vidriera located 30 km from Bahia Blanca (Buenos Aires, Argentina), was fixed, dehydrated, embedded and stained with traditional techniques for plant anatomy. The foliar abaxial epidermis of the three species had papillate cells, while the adaxial one, usually did not. The stomata were sunken in the abaxial epidermis of the three species, and of the adaxial one… More >

Morales-Pérez E¹, EJ Morales-Rosales², O Franco-Mora², D de Jesús Pérez-López², A González-Huerta², E Urbina Sánchez³

Phyton-International Journal of Experimental Botany, Vol.83, pp. 333-340, 2014, DOI:10.32604/phyton.2014.83.333

Abstract The aim of this study was to assess different doses of gibberellic and salicylic acids for the production of flowers on Gerbera jamesonni after applications to their foliage or substrate under greenhouse conditions. The ten treatments (growth regulators) were evaluated in a 10 x 2 factorial experiment in a randomized complete block design with four replications. When F values were significant, the honestly significant difference test (HSD) at the 5% level of significance was used. The principal components analysis was also used to study the interrelationship among the ten treatments and the two forms of application… More >

Grijalba P¹ y A del C Ridao²

Phyton-International Journal of Experimental Botany, Vol.83, pp. 325-332, 2014, DOI:10.32604/phyton.2014.83.325

Abstract Diaporthe phaseolorum var. caulivora is the major causal agent of stem canker in soybean (CTS) in Argentina. It has appeared mainly in the Southern Pampeana sub-region, but also in warm areas, and it has been observed with different levels of incidence, severity and virulence. The objective of this work was to study the growth rate in vitro and the pathogenicity of isolates from soybean plants at different temperatures. Twenty isolates from Buenos Aires Province were selected. The daily growth rate was measured in nine of them and in two reference isolates in potato dextrose agar (APD), under… More >

Entio LJ y MM Mujica

Phyton-International Journal of Experimental Botany, Vol.83, pp. 243-250, 2014, DOI:10.32604/phyton.2014.83.243

Abstract Successful establishment of Lotus tenuis, an important legume to improve grasslands in the Pampa Deprimida, might be limited by low seedling vigor. The number of crown stems is an important component of vigor. The objective of this work was to determine the variability in the number of crown stems on seedlings of 11 Lotus tenuis natural populations sown at high density under semi-controlled conditions. Seeds of all populations were collected in the Province of Buenos Aires, Argentina. They were sown in plastic pots and cultivated in a greenhouse. Eight weeks after seeding, seedlings of each population were… More >

Suarez Tapia A¹, MB Villamil¹, LJ Grabau²

Phyton-International Journal of Experimental Botany, Vol.83, pp. 71-81, 2014, DOI:10.32604/phyton.2014.83.071

Abstract Public demand for healthier foods and more sustainable food systems in the U.S. has triggered market prices and production of organic alternatives of major crops such as corn (Zea mays L.). Two cover crops and their interactions with tillage systems, N sources and N rates were studied to evaluate the possibility of using these agronomic practices to facilitate growing corn under organic management in Kentucky. A split-split plot design in a RCBD with four replications was evaluated in three environments (SP08, UKR08, UKR09). The main plot treatments were cover crops [hairy vetch, HV (Vicia villosa Roth) and… More >

R. Jegadeeshwaran¹, V. Sugumaran², K.P. Soman³

Structural Durability & Health Monitoring, Vol.10, No.1, pp. 81-97, 2014, DOI:10.3970/sdhm.2014.010.081

Abstract In automobile, brake system is an essential part responsible for control of the vehicle. Vibration signals of a rotating machine contain the dynamic information about its health condition. Many research papers have reported the suitability of vibration signals for fault diagnosis applications. Many of them are based on (Fast Fourier Transform) FFT, which have their own drawback with nonstationary signals. Hence, there is a need for development of new methodologies to infer diagnostic information from such non stationary signals. This paper uses vibration signals acquired from a hydraulic brake system under good and simulated faulty… More >