Bhat¹ RB, G Moskovitz²

Phyton-International Journal of Experimental Botany, Vol.78, pp. 67-73, 2009, DOI:10.32604/phyton.2009.78.061

Abstract An investigation of herbal medicinal teas from Western Cape, South Africa was conducted to assess the varieties of herbal teas used to treat various ailments. Each packet of medicinal tea is a blend of carefully selected four or more herbs which are commonly grown in the organic garden in an ancient valley near the southernmost tip of South Africa and some indigenous herbs picked up in the nearby mountains. The teas are specific for the diseased organ/s and also include the herbs to support and strengthen the systems serving the ailing organ/s. The study shows More >

Zone-Ching Lin¹, Ming-Long Huang¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.10, No.3, pp. 89-90, 2009, DOI:10.3970/icces.2009.010.089

Abstract The paper develops a two dimensional quasi-steady molecular staic model to simulate the vertical down press copper workpiece by down press the nanoscale depth of abrasive grains in different shapes. The research of the down pressing copper workpiece of abrasive grains in this paper uses the hexagonal close packed diamond abrasive grains to down press the perfect face-centered cubic copper. The paper's simulation of down pressing nanoscale depth model of abrasive grain by two dimensional quasi-steady molecular statics model is a step by step to down press copper workpiece by diamond abrasive grain. It is… More >

R. Avila¹, S. N. Atluri²

CMES-Computer Modeling in Engineering & Sciences, Vol.54, No.1, pp. 15-64, 2009, DOI:10.3970/cmes.2009.054.015

Abstract The Meshless Local Petrov Galerkin (MLPG) method is used to solve the non-steady two dimensional Navier-Stokes equations. Transient laminar flow field calculations have been carried out in domains wherein certain surfaces have: (i) a sliding motion, (ii) a harmonic motion, (iii) an undulatory movement, and (iv) a contraction-expansion movement. The weak form of the governing equations has been formulated in a Cartesian coordinate system and taking into account the primitive variables of the flow field. A fully implicit pressure correction approach, which requires at each time step an iterative process to solve in a sequential… More >

Zone-Ching Lin¹, Jia-Rong Ye²

CMES-Computer Modeling in Engineering & Sciences, Vol.50, No.3, pp. 227-252, 2009, DOI:10.3970/cmes.2009.050.227

Abstract The paper develops a quasi-steady molecular statics model to analyze nanoscale cutting of copper materials by diamond cutters with different shapes. Cutting action, cutting force, equivalent strain and equivalent stress are discussed and compared. The quasi-steady molecular statics nanocutting model first assumes the trajectory of each atom of the copper workpiece being cut whenever the diamond cutter goes forward one step. It then uses the optimization search method to solve the force equilibrium equation of the Morse force in the X and Y directions when each atom moves a small distance, so as to find… More >

Gerardo Anguiano-Orozco^1,2, Rubén Avila³

CMES-Computer Modeling in Engineering & Sciences, Vol.49, No.3, pp. 217-254, 2009, DOI:10.3970/cmes.2009.049.217

Abstract A numerical investigation of the transient, three dimensional, laminar natural convection of a fluid confined in a spherical container is carried out. Initially the fluid is quiescent with a uniform temperature T_i equal to the temperature of the wall of the container. At time t=0, the temperature of the wall is suddenly lowered to a uniform temperature T_w=0. The natural convection, that conducts to a vortex ring formation within the sphere, is driven by a terrestrial gravity force (laboratory gravity) and by the step change in the temperature of the wall. A scaling analysis of a simplified… More >

Alfredo Nicolás¹, Blanca Bermúdez², Elsa Báez³

CMES-Computer Modeling in Engineering & Sciences, Vol.48, No.1, pp. 83-106, 2009, DOI:10.3970/cmes.2009.048.083

Abstract Numerical results of natural convection flows in two-dimensional cavities, filled with air, are presented to study the effects on the characteristics of the flows as some parameters vary: the Rayleigh number Ra and the aspect ratio A of the cavity. This kind of thermal flows may be modeled by the unsteady Boussinesq approximation in stream function-vorticity variables. The results are obtained with a simple numerical scheme, previously reported for isothermal/mixed convection flows, based mainly on a fixed point iterative process applied to the non-linear elliptic system that results after time discretization. The evolution of the flows,… More >

E. J. Sellountos¹, A. Sequeira¹, D. Polyzos²

CMES-Computer Modeling in Engineering & Sciences, Vol.41, No.3, pp. 215-242, 2009, DOI:10.3970/cmes.2009.041.215

Abstract A Meshless Local Petrov-Galerkin (MLPG) method based on Local Boundary Integral Equation (LBIE) techniques is employed here for the solution of transient elastic problems with damping. The Radial Basis Functions (RBF) interpolation scheme is exploited for the meshless representation of displacements throughout the computational domain. On the intersections between the local domains and the global boundary, tractions are treated as independent variables via conventional boundary interpolation functions. The MLPG(LBIE)/RBF method is applied to both transient and steady-state Fourier transform elastodynamic domains. In both cases the LBIEs employ the simple elastostatic fundamental solution instead of the More >

Peter Lucas¹, Alexander H. van Zuijlen¹, Hester Bijl¹

CMES-Computer Modeling in Engineering & Sciences, Vol.41, No.2, pp. 147-176, 2009, DOI:10.3970/cmes.2009.041.147

Abstract Mesh adaptation is a fairly established tool to obtain numerically accurate solutions for flow problems. Computational efficiency is, however, not always guaranteed for the adaptation strategies found in literature. Typically excessive mesh growth diminishes the potential efficiency gain. This paper, therefore, extends the strategy proposed by [Aftosmis and Berger (2002)] to compute the refinement threshold. The extended strategy computes the refinement threshold based on a user desired number of grid cells and adaptations, thereby ensuring high computational efficiency. Because our main interest is flow around wind turbines, the adaptation strategy has been optimized for flow More >

Edoardo Bucchignani¹

FDMP-Fluid Dynamics & Materials Processing, Vol.5, No.1, pp. 37-60, 2009, DOI:10.3970/fdmp.2009.005.037

Abstract This article describes an implicit method for the solution of time dependent Navier-Stokes equations written in terms of vorticity and velocity. The field equations are discretized using a finite volume technique over quadrilateral meshes.
The numerical code has been applied to the classical window cavity test, employing a fine stretched non-uniform grid, in order to provide an accurate steady solution for a high value of the Rayleigh number (10⁸). It has also been performed a simulation for a value of Rayleigh larger than the critical value, in order to show the capabilities of the proposed More >

Albert Ruenes Jr¹, Serigne M. Gueye²

Canadian Journal of Urology, Vol.15, No.1, pp. 3886-3889, 2008

Abstract In the United States alone, approximately 220000 new cases of prostate cancer will be detected in 2007, and 27000 men will die of that disease. African American men will suffer disproportionately, having a prostate cancer incidence that is nearly 60% higher than their Caucasian counterparts. In fact, it is widely accepted that African American men have the highest incidence of prostate cancer in the world. This observation has led investigators to study the prostate cancer risk among African men in an effort to identify factors responsible for the high incidence of prostate cancer that plagues… More >