Yuanjun Dai^1,2, Jingan Cui¹, Baohua Li^1,*, Cong Wang¹, Kunju Shi¹

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.4, pp. 771-786, 2024, DOI:10.32604/fdmp.2023.029584 - 28 March 2024

Abstract A numerical method has been used to analyze the flow field related to a NACA 0015 airfoil with and without a flap and assess the influence of the flap height and angle on the surface pressure coefficient, lift coefficient, and drag coefficient. The numerical results demonstrate that the flap can effectively improve the lift coefficient of the airfoil; however, at small attack angles, its influence is significantly reduced. When the angle of attack exceeds the critical stall angle and the flap height is 1.5% of the chord length, the influence of the flap becomes very More >

Yingchao Li^1,*, Jianbin Wang¹, Haibin Wang²

Energy Engineering, Vol.121, No.4, pp. 1049-1065, 2024, DOI:10.32604/ee.2023.045228 - 26 March 2024

Abstract With the increasing demand for electrical services, wind farm layout optimization has been one of the biggest challenges that we have to deal with. Despite the promising performance of the heuristic algorithm on the route network design problem, the expressive capability and search performance of the algorithm on multi-objective problems remain unexplored. In this paper, the wind farm layout optimization problem is defined. Then, a multi-objective algorithm based on Graph Neural Network (GNN) and Variable Neighborhood Search (VNS) algorithm is proposed. GNN provides the basis representations for the following search algorithm so that the expressiveness… More >

Zhongping Liu¹, Enhui Sun^2,*, Jiahao Shi², Lei Zhang², Qi Wang¹, Jiali Dong¹

Energy Engineering, Vol.121, No.4, pp. 913-932, 2024, DOI:10.32604/ee.2023.043973 - 26 March 2024

Abstract There is a growing need to explore the potential of coal-fired power plants (CFPPs) to enhance the utilization rate of wind power (wind) and photovoltaic power (PV) in the green energy field. This study developed a load regulation model for a multi-power generation system comprising wind, PV, and coal energy storage using real-world data. The power supply process was divided into eight fundamental load regulation scenarios, elucidating the influence of each scenario on load regulation. Within the framework of the multi-power generation system with the wind (50 MW) and PV (50 MW) alongside a CFPP… More > Graphic Abstract

Hongsheng Su, Lixia Dong^*, Xiaoying Yu, Kai Liu

Energy Engineering, Vol.121, No.4, pp. 973-986, 2024, DOI:10.32604/ee.2023.043497 - 26 March 2024

Abstract Time based maintenance (TBM) and condition based maintenance (CBM) are widely applied in many large wind farms to optimize the maintenance issues of wind turbine gearboxes, however, these maintenance strategies do not take into account environmental benefits during full life cycle such as carbon emissions issues. Hence, this article proposes a carbon emissions computing model for preventive maintenance activities of wind turbine gearboxes to solve the issue. Based on the change of the gearbox state during operation and the influence of external random factors on the gearbox state, a stochastic differential equation model (SDE) and More > Graphic Abstract

Junhui Li¹, Xuanzhong Luo^1,2, Changxing Ge³, Cuiping Li^1,*, Changrong Wang⁴

Energy Engineering, Vol.121, No.4, pp. 869-893, 2024, DOI:10.32604/ee.2024.029722 - 26 March 2024

Abstract Peak load and wind energy emission pressure rise more as wind energy penetration keeps growing, which affects the stabilization of the PS (power system). This paper suggests integrated optimal dispatching of thermal power generators and BESS (battery energy storage system) taking wind energy emission grading punishment and deep peak clipping into consideration. Firstly, in order to minimize wind abandonment, a hierarchical wind abandonment penalty strategy based on fuzzy control is designed and introduced, and the optimal grid-connected power of wind energy is determined as a result of minimizing the peak cutting cost of the system.… More > Graphic Abstract

Haomiao Wang¹, Jinxi Wang², Qingmei Sui^2,*, Faye Zhang², Yibin Li¹, Mingshun Jiang², Phanasindh Paitekul³

Structural Durability & Health Monitoring, Vol.18, No.2, pp. 91-110, 2024, DOI:10.32604/sdhm.2023.041522 - 22 March 2024

Abstract Due to their robust learning and expression ability for complex features, the deep learning (DL) model plays a vital role in bearing fault diagnosis. However, since there are fewer labeled samples in fault diagnosis, the depth of DL models in fault diagnosis is generally shallower than that of DL models in other fields, which limits the diagnostic performance. To solve this problem, a novel transfer residual Swin Transformer (RST) is proposed for rolling bearings in this paper. RST has 24 residual self-attention layers, which use the hierarchical design and the shifted window-based residual self-attention. Combined More >

Xuhui Jiang¹, Xi Zhang¹, Song Wang¹, Ruiqiong Wang¹, Peng Zou¹, Jingzhou Lu², Xiaoxiao Li^2,*

Frontiers in Heat and Mass Transfer, Vol.22, No.1, pp. 193-216, 2024, DOI:10.32604/fhmt.2023.046832 - 21 March 2024

Abstract This study investigates the performance of a natural draft dry cooling tower group in crosswind conditions through numerical analysis. A comprehensive three-dimensional model is developed to analyze the steady-state and dynamic behavior of the towers. The impact of wind speed and direction on heat rejection capacity and flow patterns is examined. Results indicate that crosswinds negatively affect the overall heat transfer capacity, with higher crosswind speeds leading to decreased heat transfer. Notably, wind direction plays a significant role, particularly at 0°. Moreover, tower response time increases with higher crosswind speeds due to increased turbulence and More >

Vasishta Bhargava Nukala^*, Chinmaya Prasad Padhy

Sound & Vibration, Vol.58, pp. 133-150, 2024, DOI:10.32604/sv.2024.047762 - 19 March 2024

Abstract A significant aerodynamic noise from wind turbines arises when the rotating blades interact with turbulent flows. Though the trailing edge of the blade is an important source of noise at high frequencies, the present work deals with the influence of turbulence distortion on leading edge noise from wind turbine blades which becomes significant in low-frequency regions. Four quasi-empirical methods are studied to verify the accuracy of turbulent inflow noise predicted at low frequencies for a 2 MW horizontal axis wind turbine. Results have shown that all methods exhibited a downward linear trend in noise spectra More >

Xue Li, Hongying Zhang^*, Zixun Ye, Xiaoru Huang

CMC-Computers, Materials & Continua, Vol.78, No.2, pp. 2847-2864, 2024, DOI:10.32604/cmc.2024.047093 - 27 February 2024

Abstract Transformer-based stereo image super-resolution reconstruction (Stereo SR) methods have significantly improved image quality. However, existing methods have deficiencies in paying attention to detailed features and do not consider the offset of pixels along the epipolar lines in complementary views when integrating stereo information. To address these challenges, this paper introduces a novel epipolar line window attention stereo image super-resolution network (EWASSR). For detail feature restoration, we design a feature extractor based on Transformer and convolutional neural network (CNN), which consists of (shifted) window-based self-attention ((S)W-MSA) and feature distillation and enhancement blocks (FDEB). This combination effectively… More >

Yujie Duan¹, Jianguo Liang^1,*, Jianglin Liu¹, Haifeng Gao¹, Yinhui Li², Jinzhu Zhang¹, Xinyu Wen³

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.2, pp. 1239-1261, 2024, DOI:10.32604/cmes.2023.044400 - 29 January 2024

Abstract In the fiber winding process, strong disturbance, uncertainty, strong coupling, and fiber friction complicate the winding constant tension control. In order to effectively reduce the influence of these problems on the tension output, this paper proposed a tension fluctuation rejection strategy based on feedforward compensation. In addition to the bias harmonic curve of the unknown state, the tension fluctuation also contains the influence of bounded noise. A tension fluctuation observer (TFO) is designed to cancel the uncertain periodic signal, in which the frequency generator is used to estimate the critical parameter information. Then, the fluctuation More >