Qifa Lang, Yuqiao Zheng^*, Tiancai Cui, Chenglong Shi, Heyu Zhang

Energy Engineering, Vol.121, No.2, pp. 483-498, 2024, DOI:10.32604/ee.2023.042437 - 25 January 2024

Abstract This work presents a novel approach to achieve nonlinear vibration response based on the Hamilton principle. We chose the 5-MW reference wind turbine which was established by the National Renewable Energy Laboratory (NREL), to research the effects of the nonlinear flap-wise vibration characteristics. The turbine wheel is simplified by treating the blade of a wind turbine as an Euler-Bernoulli beam, and the nonlinear flap-wise vibration characteristics of the wind turbine blades are discussed based on the simplification first. Then, the blade’s large-deflection flap-wise vibration governing equation is established by considering the nonlinear term involving the… More >

Fan Xiao¹, Xiong Ping¹, Yeyang Li^2,*, Yusen Xu², Yiqun Kang¹, Dan Liu¹, Nianming Zhang¹

Energy Engineering, Vol.121, No.2, pp. 359-376, 2024, DOI:10.32604/ee.2023.040887 - 25 January 2024

Abstract The fluctuation of wind power affects the operating safety and power consumption of the electric power grid and restricts the grid connection of wind power on a large scale. Therefore, wind power forecasting plays a key role in improving the safety and economic benefits of the power grid. This paper proposes a wind power predicting method based on a convolutional graph attention deep neural network with multi-wind farm data. Based on the graph attention network and attention mechanism, the method extracts spatial-temporal characteristics from the data of multiple wind farms. Then, combined with a deep… More >

Baogang Chen¹, Fenglin Miao^2,*, Jing Yang¹, Chen Qi², Wenyan Ji¹

Energy Engineering, Vol.121, No.2, pp. 541-555, 2024, DOI:10.32604/ee.2023.028327 - 25 January 2024

Abstract Energy storage systems (ESS) and permanent magnet synchronous generators (PMSG) are speculated to be able to exhibit frequency regulation capabilities by adding differential and proportional control loops with different control objectives. The available PMSG kinetic energy and charging/discharging capacities of the ESS were restricted. To improve the inertia response and frequency control capability, we propose a short-term frequency support strategy for the ESS and PMSG. To this end, the weights were embedded in the control loops to adjust the participation of the differential and proportional controls based on the system frequency excursion. The effectiveness of More >

Zhoujie Zhu¹, Gang Wang¹, Qingquan Liu¹, Guojun Wang², Rui Dong², Dayong Zhang^2,3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.3, pp. 625-639, 2024, DOI:10.32604/fdmp.2023.042128 - 12 January 2024

Abstract Important challenges must be addressed to make wind turbines sustainable renewable energy sources. A typical problem concerns the design of the foundation. If the pile diameter is larger than that of the jacket platform, traditional mechanical models cannot be used. In this study, relying on the seabed soil data of an offshore wind farm, the m-method and the equivalent embedded method are used to address the single-pile wind turbine foundation problem for different pile diameters. An approach to determine the equivalent pile length is also proposed accordingly. The results provide evidence for the effectiveness and reliability More >

Yuanjun Dai^1,2,*, Xin Wei¹, Baohua Li¹, Cong Wang¹, Kunju Shi¹

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.2, pp. 337-348, 2024, DOI:10.32604/fdmp.2023.042434 - 14 December 2023

Abstract To study the impact of the trailing-edge wear on the vibrational behavior of wind-turbine blades, unworn blades and trailing-edge worn blades have been assessed through relevant modal tests. According to these experiments, the natural frequencies of trailing-edge worn blades −1, −2, and −3 increase the most in the second to fourth order, the fifth order increases in the middle, and the first order increases the least. The damping ratio data indicate that, in general, the first five-order damping ratios of trailing-edge worn blades −1 and trailing-edge worn blades −2 are reduced, and the first five-order More >

Shiyang Song^1,*, Tongxin Han²

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.1, pp. 127-145, 2024, DOI:10.32604/fdmp.2023.030137 - 08 November 2023

Abstract Aiming to mitigate the aerodynamic lift force imbalance between pantograph strips, which exacerbates wear and affects the current collection performance of the pantograph-catenary system, a study has been conducted to support the beam deflector optimization using a combination of experimental measurements and computational fluid dynamics (CFD) simulations. The results demonstrate that the size, position, and installation orientation of the wind deflectors significantly influence the amount of force compensation. They also indicate that the front strip deflectors should be installed downwards and the rear strip deflectors upwards, thereby forming a “π” shape. Moreover, the lift force More >

Hanpeng Kou¹, Tianlong Bu¹, Leer Mao¹, Yihong Jiao^2,*, Chunming Liu²

Energy Engineering, Vol.121, No.4, pp. 1027-1048, 2024, DOI:10.32604/ee.2023.045358 - 26 March 2024

Abstract

In order to play a positive role of decentralised wind power on-grid for voltage stability improvement and loss reduction of distribution network, a multi-objective two-stage decentralised wind power planning method is proposed in the paper, which takes into account the network loss correction for the extreme cold region. Firstly, an electro-thermal model is introduced to reflect the effect of temperature on conductor resistance and to correct the results of active network loss calculation; secondly, a two-stage multi-objective two-stage decentralised wind power siting and capacity allocation and reactive voltage optimisation control model is constructed to take account

… More > Graphic Abstract

Chen Gu^1,*, Caiyu Wang¹, Mengjiao Du², Kan Yi², Bihong Zhu¹, Hao Wang², Shu Dai¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.09776

Abstract Site measurement is essential to the meteorological and oceanographic parameters of offshore wind farms. A floating lidar measurement buoy was deployed at a Qingzhou VI wind farm where is 45-80 km away from Guangdong coast. The field observation including wind and wave data start from March, 2021.The lidar wind data is compared and calibrated with the fixed wind tower data for three months, the accuracy meets the standard of stadge3 carbon trust. In this study, all these data are used to recalibrate for the met-ocean model to relies extreme conditions, such as Typhoon Kompasu(2118) and More >

Shumin Sun¹, Peng Yu¹, Jiawei Xing¹, Yan Cheng¹, Song Yang¹, Qian Ai^2,*

Energy Engineering, Vol.120, No.12, pp. 2761-2782, 2023, DOI:10.32604/ee.2023.042635 - 29 November 2023

Abstract Wind power prediction is very important for the economic dispatching of power systems containing wind power. In this work, a novel short-term wind power prediction method based on improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) and (long short-term memory) LSTM neural network is proposed and studied. First, the original data is prepossessed including removing outliers and filling in the gaps. Then, the random forest algorithm is used to sort the importance of each meteorological factor and determine the input climate characteristics of the forecast model. In addition, this study conducts seasonal classification… More >

Yanshan Lu¹, Binbin He¹, Jun Jiang¹, Ruixiao Lin^2,*, Xinzhen Zhang², Zaimin Yang³, Zhi Rao³, Wenchuan Meng³, Siyang Sun³

Energy Engineering, Vol.120, No.12, pp. 2803-2818, 2023, DOI:10.32604/ee.2023.042328 - 29 November 2023

Abstract To solve the problem of residual wind power in offshore wind farms, a hydrogen production system with a reasonable capacity was configured to enhance the local load of wind farms and promote the local consumption of residual wind power. By studying the mathematical model of wind power output and calculating surplus wind power, as well as considering the hydrogen production/storage characteristics of the electrolyzer and hydrogen storage tank, an innovative capacity optimization allocation model was established. The objective of the model was to achieve the lowest total net present value over the entire life cycle.… More >