Yajing Zhang¹, Chaoyang Song², Zhiguo Li^2,*

Energy Engineering, Vol.120, No.2, pp. 501-510, 2023, DOI:10.32604/ee.2022.021423 - 28 November 2022

Abstract To overcome the problems of natural decreases in power quality, and to eliminate wind speed fluctuation due to wind shear and tower shadow effect arising from wind turbine structural parameters, an improved prediction model accounting for the dual effect of wind shear and tower shadow is, in this paper, built. Compared to the conventional prediction model, the proposed model contains a new constraint condition, which makes the disturbance term caused by the tower shadow effect always negative so that the prediction result is closer to the actual situation. Furthermore, wind turbine structural parameters such as More > Graphic Abstract

Saeed Akbari¹, Seyed Saeed Fazel^1,*, Hamed Hashemi-Dezaki^2,3

Energy Engineering, Vol.120, No.1, pp. 69-86, 2023, DOI:10.32604/ee.2022.024121 - 27 October 2022

Abstract The networking of microgrids has received significant attention in the form of a smart grid. In this paper, a set of smart railway stations, which is assumed as microgrids, is connected together. It has been tried to manage the energy exchanged between the networked microgrids to reduce received energy from the utility grid. Also, the operational costs of stations under various conditions decrease by applying the proposed method. The smart railway stations are studied in the presence of photovoltaic (PV) units, energy storage systems (ESSs), and regenerative braking strategies. Studying regenerative braking is one of… More > Graphic Abstract

Dahai Zhang^*, Chuanjian Wu, Jinghan He

Energy Engineering, Vol.120, No.1, pp. 1-21, 2023, DOI:10.32604/ee.2022.023304 - 27 October 2022

Abstract Line-commutated converter-voltage source converter (LCC-VSC) power transmission technology does not have the problem of communication failure very usually. It therefore can support the long-distance, long-capacity transmission of electric energy. However, factors such as topology, control strategy, and short-circuit capacities make the traditional protection principles not fully applicable to LCC-VSC hybrid transmission systems. To enhance the reliability of hybrid DC systems, a single-ended principle based on transmission coefficients is proposed and produced. First, the equivalent circuit of the LCC-VSC hybrid DC system is analyzed and the expression of the first traveling wave is deduced accordingly. Then, More >

Yutian Hong^1,*, Yuping Yan²

Energy Engineering, Vol.120, No.1, pp. 245-261, 2023, DOI:10.32604/ee.2022.022877 - 27 October 2022

Abstract With the rapid development of the economy, the scale of the power grid is expanding. The number of power equipment that constitutes the power grid has been very large, which makes the state data of power equipment grow explosively. These multi-source heterogeneous data have data differences, which lead to data variation in the process of transmission and preservation, thus forming the bad information of incomplete data. Therefore, the research on data integrity has become an urgent task. This paper is based on the characteristics of random chance and the Spatio-temporal difference of the system. According… More >

Tinnawat Hongphan¹, Matthew O. T. Cole^1,*, Chakkapong Chamroon¹, Ziv Brand²

Energy Engineering, Vol.120, No.1, pp. 147-161, 2023, DOI:10.32604/ee.2022.022821 - 27 October 2022

Abstract This paper presents a theoretical and experimental study on controller design for the AMBs in a small-scale flywheel energy storage system, where the main goals are to achieve low energy consumption and improved rotordynamic stability. A H-infinity optimal control synthesis procedure is defined for the permanent-magnet-biased AMB-rotor system with 4 degrees of freedom. Through the choice of design weighting functions, notch filter characteristics are incorporated within the controller to reduce AMB current components caused by rotor vibration at the synchronous frequency and higher harmonics. Experimental tests are used to validate the controller design methodology and More >

Li Luo¹, Yuhang Fan¹, Yu Wang¹, Peiyong Ni¹, Xuewen Zhang¹, Guannan Xi^2,*

Energy Engineering, Vol.120, No.1, pp. 125-145, 2023, DOI:10.32604/ee.2022.022295 - 27 October 2022

Abstract This paper aims to design a special exchanger to recover the exhaust gas heat of marine diesel engines used in small and medium-sized fishing vessels, which can then be used to heat water up to 55°C–85°C for membrane desalination devices to produce fresh water. A new exhaust-gas heat exchanger of fins and tube, with a reinforced heat transfer tube section, unequal spacing fins, a mixing zone between the fin groups and four routes tube bundle, was designed. Numerical simulations were also used to provide reference information for structural design. Experiments were carried out for exhaust… More >

Song Zhang¹, Wensheng Li², Zhao Li², Xiaolei Zhang¹, Zhipeng Lu¹, Xiaoning Ge^3,*

Energy Engineering, Vol.120, No.1, pp. 181-199, 2023, DOI:10.32604/ee.2022.022228 - 27 October 2022

Abstract Driven by the goal of “carbon neutrality” and “emission peak”, effectively controlling system carbon emissions has become significantly important to governments around the world. To this end, a novel two-stage low-carbon economic scheduling framework that considers the coordinated optimization of ladder-type carbon trading and integrated demand response (IDR) is proposed in this paper for the integrated energy system (IES), where the first stage determines the energy consumption plan of users by leveraging the price-based electrical-heat IDR. In contrast, the second stage minimizes the system total cost to optimize the outputs of generations with consideration of More >

Tao Hou¹, Shan Wang^1,2,*

Energy Engineering, Vol.120, No.1, pp. 87-106, 2023, DOI:10.32604/ee.2022.022122 - 27 October 2022

Abstract The existing Maximum Power Point Tracking (MPPT) method has low tracking efficiency and poor stability. It is easy to fall into the Local Maximum Power Point (LMPP) in Partial Shading Condition (PSC), resulting in the degradation of output power quality and efficiency. It was found that various bio-inspired MPPT based optimization algorithms employ different mechanisms, and their performance in tracking the Global Maximum Power Point (GMPP) varies. Thus, a Cuckoo search algorithm (CSA) combined with the Incremental conductance Algorithm (INC) is proposed (CSA-INC) is put forward for the MPPT method of photovoltaic power generation. The More > Graphic Abstract

Jun Zhou^1,*, Shijie Fang¹, Jinghong Peng¹, Qing Li², Guangchuan Liang^1,*

Energy Engineering, Vol.120, No.1, pp. 221-243, 2023, DOI:10.32604/ee.2022.020317 - 27 October 2022

Abstract Underground energy storage is an important function of all energy supply systems, and especially concerning the seemingly eternal imbalance between production and demand. Salt rock underground energy storage, for one, is widely applied in both traditional and renewable energy fields; and this particular technique can be used to store natural gas, hydrogen, and compressed air. However, resource diversification and structural complexity make the supply system increasingly uncertain with the passing years, leading to great challenges for energy storage facilities in the present, and perhaps going into the future as well. Hence, it is necessary to… More >

Hao Liu¹, Xiaoyang Zhang¹, Zhongjie Yan^1,*, Yingjian Yang^2,3, Qing’an Li^3,4,5, Chang Cai^3,4

Energy Engineering, Vol.120, No.1, pp. 163-179, 2023, DOI:10.32604/ee.2022.019927 - 27 October 2022

Abstract The typical location and number of anemometer towers in the assessed area are the key to the accuracy of wind resource assessment in complex topography. As calculation examples, this paper used two typical complex topography wind farms in Guangxi, Yunnan province in China. Firstly, we simulated the wind resource status of the anemometer tower in the Meteodyn WT software. Secondly, we compared the simulated wind resource with the actual measured data by the anemometer tower in the same situation. Thirdly, we analyzed the influence of anemometer tower location and quantity in the accuracy of wind… More >