Li Luo¹, Yuhang Fan¹, Yu Wang¹, Peiyong Ni¹, Xuewen Zhang¹, Guannan Xi^2,*

Energy Engineering, Vol.120, No.1, pp. 125-145, 2023, DOI:10.32604/ee.2022.022295 - 27 October 2022

Abstract This paper aims to design a special exchanger to recover the exhaust gas heat of marine diesel engines used in small and medium-sized fishing vessels, which can then be used to heat water up to 55°C–85°C for membrane desalination devices to produce fresh water. A new exhaust-gas heat exchanger of fins and tube, with a reinforced heat transfer tube section, unequal spacing fins, a mixing zone between the fin groups and four routes tube bundle, was designed. Numerical simulations were also used to provide reference information for structural design. Experiments were carried out for exhaust… More >

Song Zhang¹, Wensheng Li², Zhao Li², Xiaolei Zhang¹, Zhipeng Lu¹, Xiaoning Ge^3,*

Energy Engineering, Vol.120, No.1, pp. 181-199, 2023, DOI:10.32604/ee.2022.022228 - 27 October 2022

Abstract Driven by the goal of “carbon neutrality” and “emission peak”, effectively controlling system carbon emissions has become significantly important to governments around the world. To this end, a novel two-stage low-carbon economic scheduling framework that considers the coordinated optimization of ladder-type carbon trading and integrated demand response (IDR) is proposed in this paper for the integrated energy system (IES), where the first stage determines the energy consumption plan of users by leveraging the price-based electrical-heat IDR. In contrast, the second stage minimizes the system total cost to optimize the outputs of generations with consideration of More >

Tao Hou¹, Shan Wang^1,2,*

Energy Engineering, Vol.120, No.1, pp. 87-106, 2023, DOI:10.32604/ee.2022.022122 - 27 October 2022

Abstract The existing Maximum Power Point Tracking (MPPT) method has low tracking efficiency and poor stability. It is easy to fall into the Local Maximum Power Point (LMPP) in Partial Shading Condition (PSC), resulting in the degradation of output power quality and efficiency. It was found that various bio-inspired MPPT based optimization algorithms employ different mechanisms, and their performance in tracking the Global Maximum Power Point (GMPP) varies. Thus, a Cuckoo search algorithm (CSA) combined with the Incremental conductance Algorithm (INC) is proposed (CSA-INC) is put forward for the MPPT method of photovoltaic power generation. The More > Graphic Abstract

Jun Zhou^1,*, Shijie Fang¹, Jinghong Peng¹, Qing Li², Guangchuan Liang^1,*

Energy Engineering, Vol.120, No.1, pp. 221-243, 2023, DOI:10.32604/ee.2022.020317 - 27 October 2022

Abstract Underground energy storage is an important function of all energy supply systems, and especially concerning the seemingly eternal imbalance between production and demand. Salt rock underground energy storage, for one, is widely applied in both traditional and renewable energy fields; and this particular technique can be used to store natural gas, hydrogen, and compressed air. However, resource diversification and structural complexity make the supply system increasingly uncertain with the passing years, leading to great challenges for energy storage facilities in the present, and perhaps going into the future as well. Hence, it is necessary to… More >

Hao Liu¹, Xiaoyang Zhang¹, Zhongjie Yan^1,*, Yingjian Yang^2,3, Qing’an Li^3,4,5, Chang Cai^3,4

Energy Engineering, Vol.120, No.1, pp. 163-179, 2023, DOI:10.32604/ee.2022.019927 - 27 October 2022

Abstract The typical location and number of anemometer towers in the assessed area are the key to the accuracy of wind resource assessment in complex topography. As calculation examples, this paper used two typical complex topography wind farms in Guangxi, Yunnan province in China. Firstly, we simulated the wind resource status of the anemometer tower in the Meteodyn WT software. Secondly, we compared the simulated wind resource with the actual measured data by the anemometer tower in the same situation. Thirdly, we analyzed the influence of anemometer tower location and quantity in the accuracy of wind… More >

Khaled Bawaneh^1,*, Bradley Deken², Amin Esmaeili³

Energy Engineering, Vol.120, No.1, pp. 23-34, 2023, DOI:10.32604/ee.2023.019813 - 27 October 2022

Abstract In this study, information on energy usage in the United States (U.S.) aerospace manufacturing sector has been analyzed and then represented as energy intensities (kWh/m²) to establish benchmark data and to compare facilities of varying sizes. First, public sources were identified and the data from these previously published sources were aggregated to determine the energy usage of aerospace manufacturing facilities within the U.S. From this dataset, a sample of 28 buildings were selected and the energy intensity for each building was estimated from the data. Next, as a part of this study the energy data for… More >

Muhammad Idris^1,*, I. Husin², Indra Hermawan¹, Uun Novalia³, R. D. Batubara¹, Nugroho Agung Pambudi^4,*, Alfan Sarifudin⁴

Energy Engineering, Vol.120, No.1, pp. 107-123, 2023, DOI:10.32604/ee.2023.019203 - 27 October 2022

Abstract Diesel engines is an internal combustion engine with high thermal efficiency, which also uses biodiesel fuel, an environmentally friendly, non-toxic, and low sulfur content. Biodiesel has been around for a long time due to its similar characteristics to diesel fuels which has limited availability. However, several disadvantages are associated with biodiesel, such as poor volatility and high viscosity, which reduces engine performance. Therefore, this study was carried out to improve the diesel engine performance by mixing biodiesel with ecodiesel (ED), an additive produced from natural ingredients that is dissolvable in biodiesel. The biodiesel fuel properties More >

Zhenyi Feng^*, Nina Mo, Shujuan Dai, Yu Xiao, Xia Cheng

Energy Engineering, Vol.120, No.1, pp. 201-219, 2023, DOI:10.32604/ee.2022.023471 - 27 October 2022

Abstract The construction of relevant standards for building carbon emission assessment in China has just started, and the quantitative analysis method and evaluation system are still imperfect, which hinders the development of lowcarbon building design. Therefore, the use of intelligent energy management system is very necessary. The purpose of this paper is to explore the design optimization of low-carbon buildings based on intelligent energy management systems. Based on the proposed quantitative method of building carbon emission, this paper establishes the quota theoretical system of building carbon emission analysis, and develops the quota based carbon emission calculation… More >

Quanchun Yan^1,2,*, Chao Yuan¹, Wen Gu¹, Yanan Liu¹, Yiming Tang¹

Energy Engineering, Vol.120, No.1, pp. 49-68, 2023, DOI:10.32604/ee.2022.018555 - 27 October 2022

Abstract In order to solve the problems of rotor overvoltage, overcurrent and DC side voltage rise caused by grid voltage drops, a coordinated control strategy based on symmetrical and asymmetrical low voltage ride through of rotor side converter of the doubly-fed generator is proposed. When the power grid voltage drops symmetrically, the generator approximate equation under steady-state conditions is no longer applicable. Considering the dynamic process of stator current excitation, according to the change of stator flux and the depth of voltage drop, the system can dynamically provide reactive power support for parallel nodes and suppress… More >

Lihu Cao^1,2, Jinsheng Sun^1,*, Bo Zhang^3,*, Nu Lu⁴, Yuqiang Xu¹

Energy Engineering, Vol.120, No.1, pp. 35-48, 2023, DOI:10.32604/ee.2022.022867 - 27 October 2022

Abstract In gas storage or high-pressure gas wells, annular pressure is an unavoidable threat to safe, long-term resource production. The more complex situation, however, is multiple annular pressure, which means annular pressure happens in not only one annulus but two or more. Such a situation brings serious challenges to the identification of well integrity. However, few researches analyze the phenomenon of multiple annular pressure. Therefore, this paper studies the mechanism of multi-annular pressure to provide a foundation for its prevention and diagnosis. Firstly, the multi-annular pressure is classified according to the mechanism and field data. Then… More >