Campaña-Torres A¹, LR Martínez-Córdova², M Martínez-Porchas³, JA López-Elías², MA Porchas-Cornejo¹

Phyton-International Journal of Experimental Botany, Vol.81, pp. 45-50, 2012, DOI:10.32604/phyton.2012.81.045

Abstract An experiment was conducted to evaluate the effect of different culture media on the productive response and proximate composition of microalgae, Nannochloropsis oculata, and the subsequent effect of such microalgae on the productive response and proximate composition of the rotifer Brachionus rotundiformis. Microalgae were cultured in different media: Guillard F/2 (control), an agricultural fertilizer, and an aquacultural fertilizer. Thereafter, such microalgae were used to feed rotifers. A better productive response was observed when microalgae were cultured in the agricultural fertilizer. In addition, the chemical proximate composition of microalgae was influenced by the type of culture medium used. More >

Li SL, YB Zhang, YK Rui, XF Chen

Phyton-International Journal of Experimental Botany, Vol.81, pp. 41-43, 2012, DOI:10.32604/phyton.2012.81.041

Abstract Minerals are essential for human nutrition and plant growth and development. Nutrient concentrations in plants are related to many factors, including soil types. The impact of soil types on nutrient accumulation in corn, grown in black and sandy soils, was studied in the same area and management conditions. The results showed that the descending order of nutrient content was Ca > Fe > Zn > Mn > Cu > Se > Mo in both soil types. The contents of Ca, Mn, Fe, Se and Mo in kernels of corn grown in sandy soil were higher More >

Salinas¹ R, E Sánchez², JM Ruíz³, MT Lao¹, L Romero³

Phyton-International Journal of Experimental Botany, Vol.81, pp. 35-39, 2012, DOI:10.32604/phyton.2012.81.035

Abstract We determined the (1) deficiency, (2) apropriate level and (3) toxiticity of phosphorus on the total biomass production and yield of judía verde (Phaseolus vulgaris L.) cv. ‘Strike’. Studies were conducted in a growth chamber using pots. Phosphorus levels in the nutrient solution were P1: 0.5 mM; P2: 1 mM; P3: 2 mM; P4: 4 mM; P5: 6 mM, and P6: 8 mM. The optimum phosporus concentration was P3. As soil phosphorus concentration increased, concentration of this nutrient also increased in the plant. Leaf, petiole and shoot biomasses were more sensitive to deficiency than to toxicity More >

Argüello JA¹, SB Núñez¹, V Davidenco¹, DA Suárez², L Seisdedos¹, MC Baigorria¹, N La Porta¹, G Ruiz¹, V Yossen¹

Phyton-International Journal of Experimental Botany, Vol.81, pp. 23-34, 2012, DOI:10.32604/phyton.2012.81.023

Abstract The aim of the present review was to analyze and identify the problems associated with the Production System and Chain Value of Oregano in the area of Traslasierra Valley, province of Córdoba. Traditional ecotypes, such as Criollo, Chileno II and Compacto, are cultivated in the region, as well as new ecotypes such as “Serrano Cordobés”, “Flor Rosa” and “Rosa Fuerte”. The Traslasierra Valley of Córdoba is a very suitable area for the production and for increasing the production of oregano. However, the agricultural management of the different oregano ecotypes should be optimized. Ecophysiological studies conducted… More >

Gaspar-Peralta P¹, JC Carrillo-Rodríguez¹, JL Chávez-Servia, AM Vera-Guzmán², I Pérez-León¹

Phyton-International Journal of Experimental Botany, Vol.81, pp. 15-22, 2012, DOI:10.32604/phyton.2012.81.015

Abstract In order to evaluate the agronomic behavior, genotypic variation, lycopene content, and other components of fruit quality, eight advanced tomato lines were planted in greenhouses during two crop cycles, August-December 2008 and February-July 2009. Tomato lines showed significant differences in leaf length (LL), stem diameter (SD), number of flowers per branch (FLNB), number of fruits per branch (FRNB), locules per fruit (LPF), and fruit length (FRL), and the greatest phenotypic expression in fruit traits was quantified in August-December 2008. Environmental variance was significantly higher than the genotypic and genotype-environment interaction variances in LL, FRNB, fruits… More >

Urrutia J¹, R Rivera^1,2, E Hauenstein¹, P De los Ríos¹

Phyton-International Journal of Experimental Botany, Vol.81, pp. 7-13, 2012, DOI:10.32604/phyton.2012.81.007

Abstract Macrophytes of inland waters are a group of great biological interest. Although lentic systems are ideal for their growth, their presence is not so evident in oligotrophic water bodies, proliferating largely in areas with some level of contamination. A useful tool to determine the presence of a regulatory factor in the composition of these and other biological communities is the use of null models. This analysis was applied based on the co-occurrence of species through a matrix of presence and absence, with the purpose of determining the presence of randomness in species associations. The three More >

F. Balle¹, S. Huxhold¹, G. Wagner¹, D. Eifler¹

Structural Durability & Health Monitoring, Vol.8, No.4, pp. 359-370, 2012, DOI:10.32604/sdhm.2012.008.359

Abstract Aluminum alloys and carbon fiber reinforced polymers (CFRP) are two important materials for lightweight design and the combination of these dissimilar materials becomes increasingly important. Recent investigations have shown that ultrasonic metal welding is a well suited process to realize aluminum/CFRP-joints.The ultrasonic shear oscillation parallel to the welding zone with a simultaneous welding force perpendicular to the aluminum/CFRP-sheets melts the polymer matrix and squeezes the polymer matrix out of the welding zone. This allows a direct contact between the carbon fibers and the aluminum. Beside monotonic properties the cyclic deformation behavior of these ultrasonically welded More >

F. De Angelis¹

Structural Durability & Health Monitoring, Vol.8, No.4, pp. 341-358, 2012, DOI:10.32604/sdhm.2012.008.341

Abstract The influence of different loading rates on the structural response of elasto/viscoplastic materials is illustrated with specific numerical examples. An associated formulation of the evolutive laws in elasto/viscoplasticity is presented within the framework of the generalized standard material model with internal variables. An appropriate solution scheme is applied which is capable to be adopted for different constitutive models. Different loading programs are analyzed by considering different values of the loading rate and of the intrinsic properties of the material. Computational applications and examples are illustrated which describe the rate-dependency of the elasto/viscoplastic material behavior. The More >

L. Solazzi^1,2, C. Petrogalli¹, M. Lancini¹

Structural Durability & Health Monitoring, Vol.8, No.4, pp. 329-340, 2012, DOI:10.32604/sdhm.2012.008.329

Abstract A study on vibrations related to rolling contact fatigue test bench and a possible way to correlate this mechanical behavior and damage of the specimens is presented. In particular it has been evaluated the possibility to detect and quantify, thanks to vibration analysis, the damage on two discs subjected to rolling contact fatigue in different working conditions. Paper is divided in two parts. In the first part there is a description of test bench and results of its static and modal analyses. Then, some tests were carried out changing working conditions and specimens' parameters and More >

C. Colombo¹, E.G. Marchesin¹, L. Vergani^1,2, E. Boccafogli³, G. Verni³

Structural Durability & Health Monitoring, Vol.8, No.4, pp. 307-328, 2012, DOI:10.32604/sdhm.2012.008.307

Abstract In this study an experimental device for testing the structural integrity of lower limb (transtibial and transfemoral) prostheses is proposed and studied, in accordance with the ISO 10328 Standard. Aim of the development of this device is to mechanically test these kinds of prostheses, for claiming the compliance with the standard. In the first part of the paper, experimental setup of the laboratory is described for the different kinds of prescribed tests. In the second part, the test case of a transtibial prosthesis for children is proposed. After verifying the compliance with the standard of More >