Meng Xiang¹, Zhou Yang¹, Jingjing Yang¹, Tong Lu¹, Danqi Wu¹, Zhijun Liu¹, Rongjie Xue¹, Shuang Dong^2,*

Journal of Renewable Materials, Vol.10, No.3, pp. 821-831, 2022, DOI:10.32604/jrm.2022.017347

Abstract Influenced by recent COVID-19, wearing face masks to block the spread of the epidemic has become the simplest and most effective way. However, after the people wear masks, thousands of tons of medical waste by used disposable masks will be generated every day in the world, causing great pressure on the environment. Herein, conductive polymer composites are fabricated by simple melt blending of mask fragments (mask polypropylene, short for mPP) and multi-walled carbon nanotubes (MWNTs). MWNTs were used as modifiers for composites because of their high strength and high conductivity. The crystalline structure, mechanical, electrical and thermal enhancement effect of… More >

Shoukai Chen^1,4,5, Chunpeng Xing¹, Mengdie Zhao^2,*, Junfeng Zhang³, Lunyan Wang^1,4,5,*, Qidong He⁶

Journal of Renewable Materials, Vol.10, No.3, pp. 799-819, 2022, DOI:10.32604/jrm.2022.017285

Abstract

Pervious concrete is recommended, which is of great benefit to the ecological environment and human living environment. In this paper, the influences of five water-cement ratios and four fly ash contents to replace the cement by mass with a water-cement ratio of 0.30 on the properties of Recycled Aggregate Pervious Concrete (RAPC) were studied. Following this, based on the Grey relational-Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS) optimization method, the strength, permeability, abrasion loss rate, and material costs of RAPC were adopted as evaluation indices to establish a mix proportion optimization model. The results show that… More >

Jiawei Jiang, Yizhou Shen^*, Jie Tao^*, Zhenfeng Jia, Xinyu Xie, Chaojiao Zeng

Journal of Renewable Materials, Vol.10, No.3, pp. 781-797, 2022, DOI:10.32604/jrm.2022.017230

Abstract A new type of microstructure inspired by the cross section of barchan dunes was proposed to reduce windage, which was considered as a passive drag reduction technology in aerospace manufacturing field. Computational fluid dynamics method was carried out to discuss the effect of the microstructure on the skin friction reduction under high velocity flow condition. Different microstructure heights were employed to survey the reduction of drag. The results illustrated that the appearance of microstructure led to a generation of pressure drag in non-smooth model (with microstructures inspired by cross section of barchan dune) in contrast to smooth model. However, the… More > Graphic Abstract

Xiaozheng Sun^1,*, Yu Yang¹, Qiang He², Jianye Li¹, Rui Li¹, Haitao Chen¹

Journal of Renewable Materials, Vol.10, No.3, pp. 751-766, 2022, DOI:10.32604/jrm.2022.016933

Abstract The accumulation of Cu²⁺ in water is a potential threat to human health and environment. Dicarboxylic nanocellulose (DNC) with rich carboxyl groups was prepared through the NaIO₄–NaClO₂ sequential oxidation method to efficiently remove copper ions, and the Cu²⁺ adsorption properties and cost were studied. The maximum adsorption capacity reached 184.2 mg/g at pH 6 and an adsorbent dose of 5 g/L. Theoretically, the maximum adsorption capacities of monocarboxylic nanocellulose (MNC), DNC, and tricarboxylic nanocellulose (TNC) with carboxyl groups as the main adsorption sites were calculated to be 228.7, 261.3, and 148.1 mg/g, respectively. The Cu²⁺ adsorption costs of MNC, DNC, and TNC were… More > Graphic Abstract

Liqiong Ding¹, Pingsheng Li², Liu He¹, Fengnan Xu¹, Jieqiong Ding^3,*, Binhua Luo^1,*

Journal of Renewable Materials, Vol.10, No.3, pp. 767-780, 2022, DOI:10.32604/jrm.2022.016903

Abstract The development of contrast agents that can be activated by multiple modes is of great significance for tumor diagnosis. In this study, the lactoferrin (Lf)-conjugated polylactic acid (PLLA) nanobubbles (Lf-PLLA NBs) were used to encapsulate liquid perfluoropentane (PFP) with the double emulsion method, creating PFP loaded (PFP/Lf-PLLA) NBs for the ultrasound/magnetic resonance dual-modality imaging of subcutaneous tumor. The particle diameter and stability of nanobubbles were investigated by photon correlation spectroscopy. The biocompatibility of nanobubbles was preliminarily evaluated by cell proliferation and migration assay, hemolysis rate, and blood biochemistry analysis. A B-mode clinical ultrasound real-time imaging system was used to perform… More >

Tan Li, Jianzhuang Xiao^*, Amardeep Singh

Journal of Renewable Materials, Vol.10, No.3, pp. 699-720, 2022, DOI:10.32604/jrm.2022.016898

Abstract To model the concrete with complex internal structure of concrete with large sized aggregates the effect of internal structure on uniaxial compression behavior are studied. Large-sized recycled aggregates behave differently in the concrete matrix. To understand the influence on concrete matrix, a finite element model was developed to model recycled aggregate concrete composed of multiple randomly distributed irregular aggregates and cement mortar. The model was used to calculate the effect of large-size recycled coarse aggregate (LRCA) on the strength of recycled aggregate concrete and simulate the compressive strength of cubes and prisms. The factors such as the strength of new… More >

Yu Jia¹, Sudong Hua^1,*, Liying Qian², Xiaojian Ren², Jie Zuo³, Yanfang Zhang³

Journal of Renewable Materials, Vol.10, No.3, pp. 735-749, 2022, DOI:10.32604/jrm.2022.016819

Abstract To solve the problems of high moisture content, high viscosity, and poor engineering mechanical properties of soil, this paper using with steel slag (SS) and desulfurization ash (DS) as initial raw materials, realizing the cooperative treatment of solid waste and solidification of silt soil. The synergistic utilization of SS and DS can reduce the production cost of curing agent and promote its own consumption. According to blended cement of various SS contents and inspected compressive strength performances, the most suitable raw materials ratio was selected. The best formula for this curing agent is cement:steel slag = 3:7 with 5% DS, and its… More >

Daiyuan Zhang¹, Qian He², Baocong Du², Junbao Yu^2,3, Xudong Zhu³, Dingyi Yang², Shengcai Li², Tianyi Zhan¹, Liming Shen^1,*, Zhiqiang Wang^1,*, Xiaoning Lu¹

Journal of Renewable Materials, Vol.10, No.3, pp. 721-734, 2022, DOI:10.32604/jrm.2022.016793

Abstract Permeability of wood preservative is one of the most significant factors for protection of wood construction. Anisotropic flow permeability was involved in different directions of wood with higher flow resistance in the transverse and lower longitudinal directions. In this study, boron acid solution was brushed onto the tangential section of air-dried wood cubes and boron penetration along wood transverse direction was investigated under free diffusion, vacuum and HVEF treatments. Multi-scale boron distribution, FTIR measurement, leaching property, mechanical properties and fungistatic characteristic were investigated for free diffusion, vacuum and HVEF treated samples respectively. The results revealed that boron exhibited high permeability… More >

Pooja Dange^1,#, Nishit Savla^1,#, Soumya Pandit^2,*, Rambabu Bobba³, Sokhee P. Jung⁴, Piyush Kumar Gupta², Mohit Sahni⁵, Ram Prasad^6,*

Journal of Renewable Materials, Vol.10, No.3, pp. 665-697, 2022, DOI:10.32604/jrm.2022.015806

Abstract The focus of microbial fuel cell research in recent years has been on the development of materials, microbes, and transfer of charges in the system, resulting in a substantial improvement in current density and improved power generation. The cathode is generally recognized as the limiting factor due to its high-distance proton transfer, slow oxygen reduction reaction (ORR), and expensive materials. The heterogeneous reaction determines power generation in MFC. This comprehensive review describes-recent advancements in the development of cathode materials and catalysts associated with ORR. The recent studies indicated the utilization of different metal oxides, the ferrite-based catalyst to overcome this… More >

Shidong Nie^1,2,*, Song Ran^1,2, Di Wu^1,2,3, Jieyu Chen^1,2, Hui Wang^1,2, Qike Wei⁴

Journal of Renewable Materials, Vol.10, No.2, pp. 487-510, 2022, DOI:10.32604/jrm.2022.017275

Abstract The Moso bamboo, a renewable green building material used in various new green buildings, have received extensive attention with the promotion of the concept of green buildings. To explore the mechanical properties of Moso bamboo connections with external clamp steel plates, the 16 specimens were designed by changing the bolt diameters and the end distances of the bolt holes. Their static tension tests were conducted to investigate bearing capacities and failure modes of different connection configurations. Based on test results, three failure modes of these connections were obtained, including the shear failure of bolt shank, bearing failure of bolt hole… More > Graphic Abstract