Yingying Chen¹, Weiqiang Tan², Shidang Li^3,*

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2023.028533

Abstract In this paper, a novel fairness-aware harvested energy efficiency-based green transmission scheme for wireless information and power transfer (SWIPT) aided sensor networks is developed for active beamforming of multiantenna transmitter and passive beamforming at intelligent reflecting surfaces (IRS). By optimizing the active beamformer assignment at the transmitter in conjunction with the passive beamformer assignment at the IRS, we aim to maximize the minimum harvested energy efficiency among all the energy receivers (ER) where information receivers (IR) are bound to the signal-interference-noise-ratio (SINR) and the maximum transmitted power of the transmitter. To handle the non-convex problem, both semi-definite relaxation (SDR) and… More >

Jing Xin^1,*, Kenan Du¹, Jiale Feng¹, Mao Shan²

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2023.027467

Abstract This paper proposes an improved high-precision 3D semantic mapping method for indoor scenes using RGB-D images. The current semantic mapping algorithms suffer from low semantic annotation accuracy and insufficient real-time performance. To address these issues, we first adopt the Elastic Fusion algorithm to select key frames from indoor environment image sequences captured by the Kinect sensor and construct the indoor environment space model. Then, an indoor RGB-D image semantic segmentation network is proposed, which uses multi-scale feature fusion to quickly and accurately obtain object labeling information at the pixel level of the spatial point cloud model. Finally, Bayesian updating is… More >

Junling Qiu^*, Huihui Sun, Shuya Wang

CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2023.027353

Abstract As indispensable components of superconducting circuit-based quantum computers, Josephson junctions determine how well superconducting qubits perform. Reverse Monte Carlo (RMC) can be used to recreate Josephson junction’s atomic structure based on experimental data, and the impact of the structure on junctions’ properties can be investigated by combining different analysis techniques. In order to build a physical model of the atomic structure and then analyze the factors that affect its performance, this paper briefly reviews the development and evolution of the RMC algorithm. It also summarizes the modeling process and structural feature analysis of the Josephson junction in combination with different… More >

Tianshu Wang¹, Guoqing Sun¹, Shaojun Zhang¹, Mingyu Wang¹, Jixin Wang², Yunwu Han^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol., , DOI:10.32604/fdmp.2023.028740

Abstract In typical metal foundry applications, sand casting is still the most used technology. The related binder plays a very important role as its performances can directly influence the quality of castings. Among many binders, glues of animal origin have attracted much attention in recent years due to their reduced environmental impact. However, they display some drawbacks such as the tendency to coagulate easily at room temperature and a relatively low strength. In this study, a novel gas-hardening casting binder was prepared using an animal glue and anhydrous potassium carbonate as a hydrolyzing agent to avoid undesired agglomeration. Moreover, sodium pyrophosphate… More >

MARIA-LUISA VEISAGA^1,2, MARIAM AHUMADA², STACY SORIANO², LEONARDO ACUNA³, WEI ZHANG³, IVY LEUNG², ROBERT BARNUM², MANUEL A. BARBIERI^1,2,3,4,5,*

BIOCELL, Vol., , DOI:10.32604/biocell.2023.029076

Abstract Backgorund: Fruits and seed extracts of Annona montana have significant cytotoxic potential in several cancer cells. This study evaluates the effect of A. montana leaves hexane extract on several signaling cascades and gene expression in metastatic breast cancer cells upon insulin-like growth factor-1 (IGF-1) stimulation. Methods: MTT assay was performed to determine the proliferation of cancer cells. Propidium iodide staining and flow cytometry analysis of Annexin V binding was utilized to measure the progression of the cell cycle and the induction of apoptosis. Protein expression and phosphorylation were determined by western blotting analysis to examine the underlying cellular mechanism triggered… More >

Abraham Lamboro^1,3,*, Songnan Yang¹, Xueying Li¹, Dan Yao², Jun Zhang^1,*

Phyton-International Journal of Experimental Botany, Vol., , DOI:10.32604/phyton.2023.029492

Abstract The effect of beta-lactam antibiotics on shoot induction and plantlet regeneration from cotyledonary nodes was tested using two peanut cultivars. The culture media contained 4 mg/L 6-benzylaminopurine (BAP) as the main growth regulator. Various concentrations (100–600 mg/L) of cefotaxime, carbenicillin, and timentin were applied in the culture media. In all the tested media, there were no significant differences in the shoot induction as compared to the control. However, little phytotoxic effect was observed at higher concentrations of these antibiotics in the shoot elongation media. Under shoot elongation medium, shoots turned brownish and partly died at higher concentrations where shooting rates… More >

Yueqiang Yu^1,3, Minzheng Jiang^1,*, Sheng Gao^1,*, Ting Jiang¹, Bakary S. Doumbia², Bo Yan¹, Tingang Ma¹, Kexin Ren¹, Yinsong Liu¹

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.030725

Abstract High-quality wood products and valuable wood crafts receive everyone’s favor with the rapid development of the economy. In order to improve the cutting surface quality of wood forming parts, the cutting experiment of renewable Fraxinus mandshurica was conducted by waterjet-assisted CO₂ laser (WACL) technology. A quadratic mathematical model for describing the relationship between surface roughness changes and cutting parameters was established. The effects of cutting speed, flow pressure and laser power on the kerf surface roughness of Fraxinus mandshurica when cutting transversally were discussed by response surface method. The experimental results showed that kerf surface roughness decreased under a lower… More >

Zhimei Li¹, Kuan Tian², Keping Wang², Zhengyi Li², Haoli Qin^1,*, Hu Li^2,*

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.030122

Abstract Sustainable acquisition of bioactive compounds from biomass-based platform molecules is a green alternative for existing CO₂-emitting fossil-fuel technologies. Herein, a core–shell magnetic biocarbon catalyst functionalized with sulfonic acid (Fe₃O₄@SiO₂@chitosan-SO₃H, MBC-SO₃H) was prepared to be efficient for the synthesis of various N-substituted pyrroles (up to 99% yield) from bio-based hexanedione and amines under mild conditions. The abundance of Brønsted acid sites in the MBC-SO₃H ensured smooth condensation of 2,5-hexanedione with a variety of amines to produce N-substituted pyrroles. The reaction was illustrated to follow the conventional PallKnorr coupling pathway, which includes three cascade reaction steps: amination, loop closure and dehydration. The… More >

John Freddy Gelves-Díaz^1,*, Ludovic Dorkis², Richard Monroy-Sepúlveda¹, Sandra Rozo-Rincón¹, Yebrail Alexis Romero-Arcos¹

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.029270

Abstract Secondary lignocellulosic biomass has proved to be useful as an energy source through its oxidation by means of combustion processes. In accordance with the above, in this paper, we wanted to study the ash from urban pruning residues that are generated in cities in the Neotropics. Species such as Licania tomentosa, Azadirachta indica, Ficus benjamina, Terminalia catappa, Leucaena leucocephala, Prosopis juliflora and Pithecellobium dulce were selected because they have been previously studied and showed potential for thermal energy generation. These materials were calcined in an oxidizing atmosphere and characterized by X-ray diffraction and fluorescence, scanning electron microscopy with microchemistry, BET… More >

Yifan Liu¹, Shufeng Ma², Feijie Wang¹, Liqiang Wang^1,*

Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2023.028251

Abstract The molded pulp, a product of three-dimensional papermaking technology, is environmentally friendly and has a low environmental impact due to its ability to decompose quickly in the natural environment after disposal. The application of molded pulp for food packaging can replace or reduce the use of plastic food packaging. Researchers extract fibers from plants for the production of safe and hygienic molded pulp for food packaging, and they also study and enhance the qualities of molded pulp to broaden its use in the food industry. This paper reviews the sources and varieties of plant fiber used in molded pulp for… More >