Qingfang Lv^1,*, Weiyang Wang¹, Ye Liu¹

Journal of Renewable Materials, Vol.7, No.11, pp. 1231-1250, 2019, DOI:10.32604/jrm.2019.08345

Abstract In recent years, bamboo, as a green building material, has attracted more and more attention worldwide. Inspired by the investigation of cross-laminated timber in structural systems, a new engineered cross-laminated bamboo (CLB) consisting of the cross lamination of bamboo scrimber plates is proposed in this paper. To evaluate its potential in structural applications, the thermal insulation performances of the CLB walls and CLB walls with the EPS foam plate were studied and evaluated by the temperature-controlled box-heat flow meter method. Test results indicated that the thermal insulation performance improved with the increase of thickness, but More >

Selma B. Jaconis^1,*, Augusto T. Morita², Paulo L. A. Coutinho³, Suzana Borschiver¹

Journal of Renewable Materials, Vol.7, No.11, pp. 1221-1230, 2019, DOI:10.32604/jrm.2019.00025 - 14 July 2021

Abstract In recent years environmental and sustainability concerns have impacted the global chemical industry and instituted a rush to produce products from renewable raw materials. This dynamic, complex and turbulent organizational scenario, around themes touching on the issue of sustainable development model, was created involving a large number of different actors: chemical/petrochemical industries, agroindustry companies, oil/gas companies, brand owners and end users, biotechnology startups, governments, universities and society. This paper proposed the application of a structured and dynamic method of technological prediction for biopolymers in three levels: systematic monitoring process, relational database and the “alive” Technology More >

Jinlai Yang^1,2,3, Liangru Wu^1,2,3,*, Yanhong Pan^1,2,3, Hao Zhong^1,2,3

Journal of Renewable Materials, Vol.7, No.11, pp. 1209-1219, 2019, DOI:10.32604/jrm.2019.07896

Abstract A novel fluorescent composition was firstly isolated from natural winter fresh Moso bamboo shoots, and its optical properties were fully investigated by fluorescence spectroscopy. It could emit strong blue light both in solid and solution state, providing high fluorescence intensity in ethanol. The solution’s concentration and addition of water greatly affected the fluorescence intensity, high concentration and addition of much water could quench fluorescence. Apoptosis results showed that the fluorescent extract (0-25 mg/L) could not induce apoptosis of Hela cells. Confocal fluorescent microscopic imaging in human hepatocellular carcinoma cells (HepG2) was realized using the fluorescent More >

Hui Qiao¹, Jingzhao Cui¹, Shuiping Ouyang¹, Jinjie Shi², Jia Ouyang^1,3,*

Journal of Renewable Materials, Vol.7, No.11, pp. 1197-1207, 2019, DOI:10.32604/jrm.2019.07735

Abstract As an important agricultural waste, corn cob is one of the most abundant lignocellulosic biomass. In this work, dilute acid pretreatment using seven different organic acids were compared for compositional analysis of corn cob. The first pKa of organic acids, influenced by the number and type of the side group and distance between two carboxylic groups, played a crucial role in the pretreatment effect. Citric acid was found to have better pretreatment performance than other tested dicarboxylic acids. Under the condition of 30 mM, 160°C and 60 min, the level of xylose reached 22.64 g/L More >

Yan Wu^1,*, Xinyu Wu¹, Feng Yang^2,*, Li Xu¹, Meng Sun¹

Journal of Renewable Materials, Vol.7, No.11, pp. 1181-1195, 2019, DOI:10.32604/jrm.2019.07493

Abstract The cellulose nanocrystals/graphene composite aerogel (CGA) and polyvinyl alcohol/cellulose nanocrystals/graphene composite aerogel (PCGA) were prepared by suspension titration, tert-butanol solution replacement and freeze-drying successively. The removal rates of methyl blue (MB) from water by CGA and PCGA were evaluated and the effects of additions, adsorption time, reaction temperature and pH value of CGA and PCGA on MB removal rate were discussed. It was found that the optimal concentrations of both CGA and PCGA were 2 g∙L-1 in the adsorption reaction process and the adsorption equilibrium was reached within 120 min. The higher the initial pH More >

BIOCELL, Vol.43, Suppl.2, pp. 1-68, 2019

Abstract This article has no abstract. More >

M. Noryani^{1, 3, 5}, S. M. Sapuan^{1, 2,*}, M. T. Mastura^{4, 5}, M. Y. M. Zuhri¹, E. S. Zainudin¹

Journal of Renewable Materials, Vol.7, No.11, pp. 1165-1179, 2019, DOI:10.32604/jrm.2019.07691 - 14 July 2021

Abstract Material selection has become a critical part of design for engineers, due to availability of diverse choice of materials that have similar properties and meet the product design specification. Implementation of statistical analysis alone makes it difficult to identify the ideal composition of the final composite. An integrated approach between statistical model and micromechanical model is desired. In this paper, resultant natural fibre and polymer matrix from previous study is used to estimate the mechanical properties such as density, Young’s modulus and tensile strength. Four levels of fibre loading are used to compare the optimum More >

Jiawei Chen¹, Haibei Xiong^1,*, Zhifang Wang¹, Linqing Yang²

Journal of Renewable Materials, Vol.7, No.11, pp. 1147-1164, 2019, DOI:10.32604/jrm.2019.07642

Abstract Wood and wood-based composite materials have gained increasing attention in the sustainable building industry because of their renewability and environmental friendliness. Oriented oblique strand lumber (Eucalyptus Strand Wood, ESWood), which is manufactured from fast-growing small diameter eucalyptus wood (Eucalyptus urophylla × E. grandis), is introduced in this paper. Small clear specimen tests were conducted to determine the mechanical properties of ESWood material while full-scale component tests were performed to observe the structural performance of ESWood beams. A comparison of mechanical properties of ESWood with other wood/bamboo-based materials is then reported. From the results presented herein,… More >

Nadezda Stevulova^1,*, Viola Hospodarova¹, Adriana Estokova¹, Eva Singovszka¹, Marian Holub¹, Stefan Demcak¹, Jaroslav Briancin², Anton Geffert³, Frantisek Kacik³, Vojtech Vaclavik⁴, Tomas Dvorsky⁴

Journal of Renewable Materials, Vol.7, No.11, pp. 1121-1145, 2019, DOI:10.32604/jrm.2019.07556

Abstract The aim of this study was to characterize two types of cellulosic fibers obtained from bleached wood pulp and unbleached recycled waste paper with different cellulose content (from 47.4 percent up to 82 percent), to compare and to analyze the potential use of the recycled fibers for building application, such as plastering mortar. Changes in the chemical composition, cellulose crystallinity and degree of polymerization of the fibers were found. The recycled fibers of lower quality showed heterogeneity in the fiber sizes (width and length), and they had greater surface roughness in comparison to high purity… More >

BIOCELL, Vol.43, Suppl.1, pp. 1-133, 2019

Abstract This article has no abstract. More >