TY - EJOU AU - Li, Shengcai AU - Tang, Jun AU - Guo, Lin TI - Mechanical Behaviors and Deformation Properties of Retaining Wall Formed by Grouting Mould-Bag Pile T2 - Structural Durability \& Health Monitoring PY - 2019 VL - 13 IS - 1 SN - 1930-2991 AB - The simplified mechanical model and finite element model are established on the basis of the measured results and analysis of the grouting pile deformation monitoring, surface horizontal displacement and vertical displacement monitoring, deep horizontal displacement (inclinometer) monitoring, soil pressure monitoring and seepage pressure monitoring in the lower reaches of Wuan River regulation project in Shishi, Fujian Province. The mechanical behavior and deformation performance of mould-bag pile retaining wall formed after controlled cement grouting in the silty stratum of the test section are analyzed and compared. The results show that the use of controlled cement grouting mould-bag pile technology is to strengthen the soft stratum for sealing water and reinforcement, so that it can rock into a retaining wall, which can both retain soil and seal water with excellent effect. The control of cement grouting technology not only makes the soft soil rock in the range of retaining wall of mould-bag pile, but also makes a wide range of soil around the mould-bag pile squeeze and embed to compaction; and its cohesion and internal friction angle increased, so as to achieve the purpose of reducing soil pressure and improving mechanical and deformation properties of retaining wall. KW - Controlled cement grouting technology KW - grouting mould-bag pile KW - retaining wall KW - mechanical behaviors KW - deformation properties DO - 10.32604/sdhm.2019.06058