Table of Content

Open Access iconOpen Access

ABSTRACT

Design of Processing System of Vibration Signals

Zeng Fan, Zhu shijian, Lou jingjun

The International Conference on Computational & Experimental Engineering and Sciences 2011, 19(1), 5-6. https://doi.org/10.3970/icces.2011.019.005

Abstract

A signal processing electric circuit used in vibration signals processing system has been designed, which contains the pre-amplifier, the single chip ATMEGA16 and the microprocessor programmable MAX262 and so on. Its feasibility test is carried out. The center frequency and other parameters are input into the computer by VC software programmed, and the computer sends these instructions to the single chip. The single chip controls MAX262 filter to work regularly and the noise signals are well filtered. The signals output from the data sampler are analyzed and processed, and the vibration signals can be clearly recognized. The experimental results show that the designed signal processing electric circuit is feasible and its effect of application is good.

Cite This Article

APA Style
Fan, Z., shijian, Z., jingjun, L. (2011). Design of processing system of vibration signals. The International Conference on Computational & Experimental Engineering and Sciences, 19(1), 5-6. https://doi.org/10.3970/icces.2011.019.005
Vancouver Style
Fan Z, shijian Z, jingjun L. Design of processing system of vibration signals. Int Conf Comput Exp Eng Sciences . 2011;19(1):5-6 https://doi.org/10.3970/icces.2011.019.005
IEEE Style
Z. Fan, Z. shijian, and L. jingjun "Design of Processing System of Vibration Signals," Int. Conf. Comput. Exp. Eng. Sciences , vol. 19, no. 1, pp. 5-6. 2011. https://doi.org/10.3970/icces.2011.019.005



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 1019

    View

  • 677

    Download

  • 0

    Like

Share Link