Table of Content

Open Access iconOpen Access

ABSTRACT

Numerical Simulation for TIG Welding of Stainless Steel with Metal Vapor

K. Yamamoto1, M. Tanaka1, S. Tashiro1, K. Nakata1, K. Yamazaki2, E. Yamamoto2, K. Suzuki2, A. B. Murphy3

Joining and Welding Research Institute, Osaka University, Japan
KOBE STEEL, LTD., Japan
CSIRO Industrial Physics, Australia

The International Conference on Computational & Experimental Engineering and Sciences 2008, 7(1), 1-6. https://doi.org/10.3970/icces.2008.007.001

Abstract

Authors have used a numerical model of stationary helium TIG arc welding taking into account the iron, chromium and manganese vapors produced from the weld pool surface and have simulated the distribution of the metal vapors, plasma temperature, fluid flow velocity and the formation of the weld pool. The concentration of manganese vapor in arc plasma was much higher compared with the composition of manganese for stainless steel.

Cite This Article

APA Style
Yamamoto, K., Tanaka, M., Tashiro, S., Nakata, K., Yamazaki, K. et al. (2008). Numerical simulation for TIG welding of stainless steel with metal vapor. The International Conference on Computational & Experimental Engineering and Sciences, 7(1), 1-6. https://doi.org/10.3970/icces.2008.007.001
Vancouver Style
Yamamoto K, Tanaka M, Tashiro S, Nakata K, Yamazaki K, Yamamoto E, et al. Numerical simulation for TIG welding of stainless steel with metal vapor. Int Conf Comput Exp Eng Sciences . 2008;7(1):1-6 https://doi.org/10.3970/icces.2008.007.001
IEEE Style
K. Yamamoto et al., "Numerical Simulation for TIG Welding of Stainless Steel with Metal Vapor," Int. Conf. Comput. Exp. Eng. Sciences , vol. 7, no. 1, pp. 1-6. 2008. https://doi.org/10.3970/icces.2008.007.001



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 900

    View

  • 686

    Download

  • 0

    Like

Share Link