Junqi Guo^1,2, Qingyun Xiong^1,*, Minghui Yang¹, Ziyun Zhao¹

CMC-Computers, Materials & Continua, Vol.76, No.1, pp. 827-848, 2023, DOI:10.32604/cmc.2023.036450

Abstract Nowadays, smart wearable devices are used widely in the Social Internet of Things (IoT), which record human physiological data in real time. To protect the data privacy of smart devices, researchers pay more attention to federated learning. Although the data leakage problem is somewhat solved, a new challenge has emerged. Asynchronous federated learning shortens the convergence time, while it has time delay and data heterogeneity problems. Both of the two problems harm the accuracy. To overcome these issues, we propose an asynchronous federated learning scheme based on double compensation to solve the problem of time delay and data heterogeneity problems.… More >

K. Sugapriya^*, S. Omkumar

Intelligent Automation & Soft Computing, Vol.36, No.1, pp. 803-818, 2023, DOI:10.32604/iasc.2023.032163

Abstract The antenna plays an essential role in the medical industry. The short-range 5^th Generation (5G) communication can be used for seamless transmission, reception, patient monitoring, sensing and measuring various processes at high speeds. A passive Ultra Wide Band (UWB) antenna, used as a sensor in the measurement of Prothrombin Time (PT) i.e., blood clot is being proposed. The investigated micro-strip patch UWB antenna operating in the frequency range of 3.1 to 10.6 GHz consists of a circular patch with a diamond-shaped slot made of jeans substrate material with good sensing properties is accomplished by adjusting the copper thickness of the… More >

Chih-Ta Yen^1,*, Tz-Yun Chen², Un-Hung Chen³, Guo-Chang Wang³, Zong-Xian Chen³

CMC-Computers, Materials & Continua, Vol.74, No.1, pp. 83-99, 2023, DOI:10.32604/cmc.2023.032739

Abstract A system for classifying four basic table tennis strokes using wearable devices and deep learning networks is proposed in this study. The wearable device consisted of a six-axis sensor, Raspberry Pi 3, and a power bank. Multiple kernel sizes were used in convolutional neural network (CNN) to evaluate their performance for extracting features. Moreover, a multiscale CNN with two kernel sizes was used to perform feature fusion at different scales in a concatenated manner. The CNN achieved recognition of the four table tennis strokes. Experimental data were obtained from 20 research participants who wore sensors on the back of their… More >

Anita Gehlot¹, Rajesh Singh¹, Sweety Siwach², Shaik Vaseem Akram¹, Khalid Alsubhi³, Aman Singh^4,*, Irene Delgado Noya^4,5, Sushabhan Choudhury²

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 999-1015, 2022, DOI:10.32604/cmc.2022.023861

Abstract Wearable monitoring devices are in demand in recent times for monitoring daily activities including exercise. Moreover, it is widely utilizing for preventing injuries of athletes during a practice session and in few cases, it leads to muscle fatigue. At present, emerging technology like the internet of things (IoT) and sensors is empowering to monitor and visualize the physical data from any remote location through internet connectivity. In this study, an IoT-enabled wearable device is proposing for monitoring and identifying the muscle fatigue condition using a surface electromyogram (sEMG) sensor. Normally, the EMG signal is utilized to display muscle activity. Arduino… More >

Zhoulei Cao¹, Qijun Wen¹, Xiaoliang Wang^1,*, Qing Yang¹, Frank Jiang²

Journal on Internet of Things, Vol.3, No.1, pp. 11-17, 2021, DOI:10.32604/jiot.2021.010404

Abstract The miniaturization and endurance of wearable devices have been the research direction for a long time. With the development of nanotechnology and the emergence of microelectronics products, people have explored many new strategies that may be applied to wearable devices. In this overview, we will summarize the recent research of wearable devices in these two directions, and summarize some available related technologies. More >

Sun-Taag Choe, We-Duke Cho^*, Jai-Hoon Kim, and Ki-Hyung Kim

Intelligent Automation & Soft Computing, Vol.26, No.4, pp. 679-691, 2020, DOI:10.32604/iasc.2020.010102

Abstract Recent research on activity recognition in wearable devices has identified a key challenge: k-nearest neighbors (k-NN) algorithms have a high operational time complexity. Thus, these algorithms are difficult to utilize in embedded wearable devices. Herein, we propose a method for reducing this complexity. We apply a clustering algorithm for learning data and assign labels to each cluster according to the maximum likelihood. Experimental results show that the proposed method achieves effective operational levels for implementation in embedded devices; however, the accuracy is slightly lower than that of a traditional k-NN algorithm. Additionally, our method provides the advantage of controlling the… More >

Qiaoyang Zhang¹, Zhiyao Liang^1,*, Zhiping Cai²

CMC-Computers, Materials & Continua, Vol.59, No.2, pp. 457-471, 2019, DOI:10.32604/cmc.2019.03758

Abstract Wearable devices are becoming more popular in our daily life. They are usually used to monitor health status, track fitness data, or even do medical tests, etc. Since the wearable devices can obtain a lot of personal data, their security issues are very important. Motivated by the consideration that the current pairing mechanisms of Bluetooth Low Energy (BLE) are commonly impractical or insecure for many BLE based wearable devices nowadays, we design and implement a security framework in order to protect the communication between these devices. The security framework is a supplement to the Bluetooth pairing mechanisms and is compatible… More >