Submit

Login Login

Register Register

Home / Journals / CMC / Online First / doi:10.32604/cmc.2026.077155
Journal Menu
Special Issues
Table of Content

All issues

Online First

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

Open Access

ARTICLE

Tribological Performance and Contact Stress Analysis of UV-Curable Acrylic/ZnO Nanocomposites

Hye-Min Kwon, Sung-Jun Lee, Chang-Lae Kim*
Department of Mechanical Engineering, Chosun University, Gwangju, Republic of Korea
* Corresponding Author: Chang-Lae Kim. Email: email
(This article belongs to the Special Issue: Computational Approaches for Tribological Materials and Surface Engineering)

Computers, Materials & Continua https://doi.org/10.32604/cmc.2026.077155

Received 03 December 2025; Accepted 22 January 2026; Published online 13 February 2026

Abstract

UV-curable acrylic polymers are promising for advanced coating applications; however, they suffer from low mechanical strength and wear resistance. This study investigated the effects of zinc oxide (ZnO) nanoparticle incorporation (0, 1, 3, and 5 wt.%) on mechanical, surface, and tribological properties of UV-curable acrylic polymer nanocomposites. The elastic modulus increased from 9.41 MPa (bare polymer) to 22.39 MPa (5 wt.% ZnO), a 138% improvement. X-ray diffraction (XRD) analysis confirmed the formation of a crystalline region at the polymer-ZnO interface, with crystallite sizes reaching 121.94 nm compared to 7.95 nm for the bare-polymer. Surface roughness increased (0.99 to 2.45 μm), while contact angle decreased (66° to 49.23°), indicating improved wettability. Under high-load conditions (100 mN, 2 Hz), the 5 wt.% ZnO composite exhibited the lowest friction coefficient (0.29) and the second-lowest wear rate (6 × 10−7 mm3/N·mm), representing 26% and 63% reductions compared to bare polymer, respectively. Finite element analysis (FEA) revealed that an increased elastic modulus reduced the indentation depth and increased the localized contact stress, contributing to improved wear resistance of the coating. This study demonstrates the structure-property-performance relationships for designing durable acrylic polymer-based nanocomposite coating.

Keywords

UV-curable acrylic polymer; zinc oxide nanoparticles; tribological properties; finite element analysis; wear resistance

  • 133

    View

  • 50

    Download

  • 0

    Like

Related articles
Copyright© 2026 Tech Science Press
© 1997-2026 TSP (Henderson, USA) unless otherwise stated

Share Link