Open Access
ARTICLE
Conformal Prediction for Reliable Hyperparameter Selection in Sparse FIR Filter Design
Mohammed Hassan Alnemari1,2,*, Abdelrahman Osman Elfaki3, Anas Bushnag1, Mohamed Hussien Mohamed Nerma1
1 Department of Computer Engineering, Faculty of Computer Science and Information Technology, University of Tabuk, Tabuk, Saudi Arabia
2 AIST Research Center, University of Tabuk, Tabuk, Saudi Arabia
3 Department of Computer Science, Faculty of Computer Science and Information Technology, University of Tabuk, Tabuk, Saudi Arabia
* Corresponding Author: Mohammed Hassan Alnemari. Email:
Computers, Materials & Continua 2026, 88(3), 57 https://doi.org/10.32604/cmc.2026.082976
Received 07 April 2026; Accepted 04 June 2026; Issue published 23 July 2026
Abstract
Sparse finite impulse response (FIR) filters reduce computational cost on resource-constrained devices, but selecting the sparsification threshold
λ is typically left to grid search or hand tuning. We propose a two-stage method: a 67,331-parameter surrogate network predicts
(Ap,As,S) (passband ripple in dB, stopband attenuation in dB, sparsity in %) from a filter specification and a candidate
λ, and split conformal prediction (CP) calibrates ± intervals around each prediction. We then select
λ by minimizing a worst-case penalty computed on the conservative ends of the intervals (the upper bound on
Ap and the lower bound on
As). On 10,000 test specifications the method reaches 76.5% specification satisfaction, near-parity with grid search (78.4%) with a 1.9
× speedup, while point-prediction surrogates reach only 39.4%. On feasible specifications (where any grid
λ satisfies both constraints), the method reaches 97.6%. Stratified (Mondrian) conformal prediction lifts standard CP coverage from 67%–75% to 95.5%, and adaptive recalibration brings passband coverage to 91.3%. The procedure transfers without modification to iteratively reweighted least squares (IRLS) sparsification (76.6%) and to highpass (79.2%) and bandpass (52.4%) filters. The implementation runs on a central processing unit (CPU) and is suitable for edge deployment; code and data are public.
Keywords
Conformal prediction; sparse FIR filter; edge IoT; surrogate modeling; uncertainty quantification; hyperparameter optimization
Cite This Article
APA Style
Alnemari, M.H., Elfaki, A.O., Bushnag, A., Nerma, M.H.M. (2026). Conformal Prediction for Reliable Hyperparameter Selection in Sparse FIR Filter Design.
Computers, Materials & Continua,
88(3), 57.
https://doi.org/10.32604/cmc.2026.082976
Vancouver Style
Alnemari MH, Elfaki AO, Bushnag A, Nerma MHM. Conformal Prediction for Reliable Hyperparameter Selection in Sparse FIR Filter Design. Comput Mater Contin. 2026;88(3):57.
https://doi.org/10.32604/cmc.2026.082976
IEEE Style
M. H. Alnemari, A. O. Elfaki, A. Bushnag, and M. H. M. Nerma, “Conformal Prediction for Reliable Hyperparameter Selection in Sparse FIR Filter Design,”
Comput. Mater. Contin., vol. 88, no. 3, pp. 57, 2026.
https://doi.org/10.32604/cmc.2026.082976

Copyright © 2026 The Author(s). Published by Tech Science Press.
This work is licensed under a
Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.