Open Access iconOpen Access

ARTICLE

Numerical Investigation of Gas Binding Dynamics in Centrifugal Pumps Using LBM–LES

Xiuli Wang1, Xinshen You1,2, Wei Xu3, Weibin Zhang2, Kehui Zhang1, Yuanyuan Zhao4,*

1 Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang, China
2 Key Laboratory of Fluid and Power Machinery, Xihua University, Ministry of Education, Chengdu, China
3 School of Energy and Power Engineering, Jiangsu University, Zhenjiang, China
4 School of the Environment and Safety Engineering, Jiangsu University, Zhenjiang, China

* Corresponding Author: Yuanyuan Zhao. Email: email

(This article belongs to the Special Issue: Fluid and Thermal Dynamics in the Development of Unconventional Resources IV)

Fluid Dynamics & Materials Processing 2026, 22(5), 5 https://doi.org/10.32604/fdmp.2026.081863

Abstract

Gas binding fault (GBF) represents a critical operating condition in centrifugal pumps, characterized by severe performance degradation due to gas–liquid interactions within the flow passages. To elucidate the underlying mechanisms, this study employs a coupled Lattice Boltzmann Method and Large Eddy Simulation (LBM–LES) framework to analyze the hydro–mechanical-electrical behavior of a centrifugal pump under varying inlet gas volume fractions (IGVF, β). It is shown that, at low gas content (β ≈ 3%), dispersed bubbles primarily accumulate along the blade suction surface and near the impeller outlet. As β increases to 6%, gas structures migrate toward the impeller hub, with partial transport to the outlet where gas-liquid separation becomes evident. Further increases in β promote coalescence into larger gas clusters, progressively obstructing the flow channels and intensifying flow instability. The evolution of characteristic performance indicators reveals a clear dependence on both gas content and operating conditions. At low flow rates, these indicators vary monotonically with β, whereas at higher flow rates they exhibit pronounced fluctuations, reflecting enhanced unsteadiness. In particular, the pressure coefficient remains relatively stable for β below 6%, corresponding to a non-gas-binding regime. Beyond this threshold, it decreases sharply, marking the onset of gas binding.

Keywords

GBF; multi-physics field simulation; IGVF; centrifugal pump unit; LBM-LES

Cite This Article

APA Style
Wang, X., You, X., Xu, W., Zhang, W., Zhang, K. et al. (2026). Numerical Investigation of Gas Binding Dynamics in Centrifugal Pumps Using LBM–LES. Fluid Dynamics & Materials Processing, 22(5), 5. https://doi.org/10.32604/fdmp.2026.081863
Vancouver Style
Wang X, You X, Xu W, Zhang W, Zhang K, Zhao Y. Numerical Investigation of Gas Binding Dynamics in Centrifugal Pumps Using LBM–LES. Fluid Dyn Mater Proc. 2026;22(5):5. https://doi.org/10.32604/fdmp.2026.081863
IEEE Style
X. Wang, X. You, W. Xu, W. Zhang, K. Zhang, and Y. Zhao, “Numerical Investigation of Gas Binding Dynamics in Centrifugal Pumps Using LBM–LES,” Fluid Dyn. Mater. Proc., vol. 22, no. 5, pp. 5, 2026. https://doi.org/10.32604/fdmp.2026.081863



cc Copyright © 2026 The Author(s). Published by Tech Science Press.
This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 125

    View

  • 23

    Download

  • 0

    Like

Share Link