Open Access
ARTICLE
Acoustic Potential Generation under Acoustic Standing Waves Modeling using CFD Software
Fluid Dynamics & Materials Processing 2015, 11(1), 27-48. https://doi.org/10.3970/fdmp.2015.011.027
Abstract
In the past few years, modeling of the Acoustic StandingWaves (ASW) phenomena has become a topic of great interest due to its theoretical connections with particle/cells manipulation techniques, which represent important tools in the biotechnology field. The present paper proposes a model based on the use of moving wall boundary conditions coupled with a viscous compressible fluid in a square channel. This model successfully achieved the generation of ASWs in the square cross-section for several resonance frequencies; the corresponding acoustic potential for the fundamental resonant mode and several harmonics have also been calculated and are discussed here.Keywords
Acoustic Standing Waves, Moving Walls, Computational Fluid Dynamics
Cite This Article
APA Style
Iorio, C.S., Perfetti, C. (2015). Acoustic Potential Generation under Acoustic Standing Waves Modeling using CFD Software. Fluid Dynamics & Materials Processing, 11(1), 27–48. https://doi.org/10.3970/fdmp.2015.011.027
Vancouver Style
Iorio CS, Perfetti C. Acoustic Potential Generation under Acoustic Standing Waves Modeling using CFD Software. Fluid Dyn Mater Proc. 2015;11(1):27–48. https://doi.org/10.3970/fdmp.2015.011.027
IEEE Style
C.S. Iorio and C. Perfetti, “Acoustic Potential Generation under Acoustic Standing Waves Modeling using CFD Software,” Fluid Dyn. Mater. Proc., vol. 11, no. 1, pp. 27–48, 2015. https://doi.org/10.3970/fdmp.2015.011.027

This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.