Khalid Mahmood Aamir¹, Muhammad Ramzan^1,2, Saima Skinadar¹, Hikmat Ullah Khan³, Usman Tariq⁴, Hyunsoo Lee⁵, Yunyoung Nam^5,*, Muhammad Attique Khan⁶

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 17-33, 2022, DOI:10.32604/cmc.2022.018613

Abstract This paper focuses on detecting diseased signals and arrhythmias classification into two classes: ventricular tachycardia and premature ventricular contraction. The sole purpose of the signal detection is used to determine if a signal has been collected from a healthy or sick person. The proposed research approach presents a mathematical model for the signal detector based on calculating the instantaneous frequency (IF). Once a signal taken from a patient is detected, then the classifier takes that signal as input and classifies the target disease by predicting the class label. While applying the classifier, templates are designed separately for ventricular tachycardia and… More >

Fahd N. Al-Wesabi^1,2,*, Imran Khan³, Saleem Latteef Mohammed⁴, Huda Farooq Jameel⁴, Mohammad Alamgeer⁵, Ali M. Al-Sharafi⁶, Byung Seo Kim⁷

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 1-15, 2022, DOI:10.32604/cmc.2022.018469

Abstract With the rapid development of the next-generation mobile network, the number of terminal devices and applications is growing explosively. Therefore, how to obtain a higher data rate, wider network coverage and higher resource utilization in the limited spectrum resources has become the common research goal of scholars. Device-to-Device (D2D) communication technology and other frontier communication technologies have emerged. Device-to-Device communication technology is the technology that devices in proximity can communicate directly in cellular networks. It has become one of the key technologies of the fifth-generation mobile communications system(5G). D2D communication technology which is introduced into cellular networks can effectively improve… More >

Hossein Bisheh^1,2, Yunhua Luo^1,3, Timon Rabczuk^2,*

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 1349-1369, 2022, DOI:10.32604/cmc.2022.018262

Abstract Various parameters such as age, height, weight, and body mass index (BMI) influence the hip fracture risk in the elderly which is the most common injury during the sideways fall. This paper presents a parametric study of hip fracture risk based on the gender, age, height, weight, and BMI of subjects using the subject-specific QCT-based finite element modelling and simulation of single-leg stance and sideways fall loadings. Hip fracture risk is estimated using the strain energy failure criterion as a combination of bone stresses and strains leading to more accurate and reasonable results based on the bone failure mechanism. Understanding… More >

Abdul Majid¹, Muhammad Attique Khan¹, Majed Alhaisoni², Muhammad Asfand E. yar³, Usman Tariq⁴, Nazar Hussain¹, Yunyoung Nam^5,*, Seifedine Kadry⁶

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 1387-1402, 2022, DOI:10.32604/cmc.2022.017701

Abstract Agriculture has been an important research area in the field of image processing for the last five years. Diseases affect the quality and quantity of fruits, thereby disrupting the economy of a country. Many computerized techniques have been introduced for detecting and recognizing fruit diseases. However, some issues remain to be addressed, such as irrelevant features and the dimensionality of feature vectors, which increase the computational time of the system. Herein, we propose an integrated deep learning framework for classifying fruit diseases. We consider seven types of fruits, i.e., apple, cherry, blueberry, grapes, peach, citrus, and strawberry. The proposed method… More >

Jakkrit Onshaunjit, Jakkree Srinonchat^*

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 355-367, 2022, DOI:10.32604/cmc.2022.017698

Abstract An ideal printed circuit board (PCB) defect inspection system can detect defects and classify PCB defect types. Existing defect inspection technologies can identify defects but fail to classify all PCB defect types. This research thus proposes an algorithmic scheme that can detect and categorize all 14-known PCB defect types. In the proposed algorithmic scheme, fuzzy c-means clustering is used for image segmentation via image subtraction prior to defect detection. Arithmetic and logic operations, the circle hough transform (CHT), morphological reconstruction (MR), and connected component labeling (CCL) are used in defect classification. The algorithmic scheme achieves 100% defect detection and 99.05%… More >

Parneet Kaur¹, Yogesh Kumar¹, Shakeel Ahmed^2,*, Abdulaziz Alhumam², Ruchi Singla³, Muhammad Fazal Ijaz⁴

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 35-50, 2022, DOI:10.32604/cmc.2022.017681

Abstract Automatic License Plate Recognition (ALPR) systems are important in Intelligent Transportation Services (ITS) as they help ensure effective law enforcement and security. These systems play a significant role in border surveillance, ensuring safeguards, and handling vehicle-related crime. The most effective approach for implementing ALPR systems utilizes deep learning via a convolutional neural network (CNN). A CNN works on an input image by assigning significance to various features of the image and differentiating them from each other. CNNs are popular for license plate character recognition. However, little has been reported on the results of these systems with regard to unusual varieties… More >

Zhang Nan¹, Li Wenjing^1,*, Liu Zhu¹, Li Zhi¹, Liu Yumin¹, Nurun Nahar²

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 843-854, 2022, DOI:10.32604/cmc.2022.017504

Abstract With the continuous evolution of smart grid and global energy interconnection technology, amount of intelligent terminals have been connected to power grid, which can be used for providing resource services as edge nodes. Traditional cloud computing can be used to provide storage services and task computing services in the power grid, but it faces challenges such as resource bottlenecks, time delays, and limited network bandwidth resources. Edge computing is an effective supplement for cloud computing, because it can provide users with local computing services with lower latency. However, because the resources in a single edge node are limited, resource-intensive tasks… More >

Dezheng Zhang^1,2, Qi Jia^1,2, Shibing Yang^1,2, Xinliang Han², Cong Xu³, Xin Liu^1,4, Yonghong Xie^1,2,*

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 159-170, 2022, DOI:10.32604/cmc.2022.017295

Abstract Syndrome differentiation is the core diagnosis method of Traditional Chinese Medicine (TCM). We propose a method that simulates syndrome differentiation through deductive reasoning on a knowledge graph to achieve automated diagnosis in TCM. We analyze the reasoning path patterns from symptom to syndromes on the knowledge graph. There are two kinds of path patterns in the knowledge graph: one-hop and two-hop. The one-hop path pattern maps the symptom to syndromes immediately. The two-hop path pattern maps the symptom to syndromes through the nature of disease, etiology, and pathomechanism to support the diagnostic reasoning. Considering the different support strengths for the… More >

Alex Rudniy^*

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 979-992, 2022, DOI:10.32604/cmc.2022.016676

Abstract This paper describes the process of design and construction of a data warehouse (“DW”) for an online learning platform using three prominent technologies, Microsoft SQL Server, MongoDB and Apache Hive. The three systems are evaluated for corpus construction and descriptive analytics. The case also demonstrates the value of evidence-centered design principles for data warehouse design that is sustainable enough to adapt to the demands of handling big data in a variety of contexts. Additionally, the paper addresses maintainability-performance tradeoff, storage considerations and accessibility of big data corpora. In this NSF-sponsored work, the data were processed, transformed, and stored in the… More >

Tae Woo Kim¹, Yi Pan², Jong Hyuk Park^1,*

CMC-Computers, Materials & Continua, Vol.71, No.1, pp. 1035-1049, 2022, DOI:10.32604/cmc.2022.015546

Abstract In the current era, anyone can freely access the Internet thanks to the development of information and communication technology. The cloud is attracting attention due to its ability to meet continuous user demands for resources. Additionally, Cloud is effective for systems with large data flow such as the Internet of Things (IoT) systems and Smart Cities. Nonetheless, the use of traditional networking technology in the cloud causes network traffic overload and network security problems. Therefore, the cloud requires efficient networking technology to solve the existing challenges. In this paper, we propose one-time password-based software-defined cloud architecture for secure dynamic routing… More >