Tawfiq Chekifi^{1, *}, Brahim Dennai², Rachid Khelfaoui²

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.3, pp. 173-187, 2017, DOI:10.3970/fdmp.2017.013.173

Abstract Recently, modeling immiscible fluids such as oil and water have been a classical research topic. Droplet-based microfluidics presents a unique platform for mixing, reaction, separation, dispersion of drops and many other functions. In this paper, we suggest a numerical CFD study of microfluidic oscillator with two different lengths of feedback loop. In order to produce simultaneous droplets of gasoil on water, a typical geometry that includes double T-junction is connected to the fluidic oscillator. Droplets production is computed by volume-of-fluid method (VOF). Flow oscillations of droplets were triggered by the Coanda effect of jet flow. More >

M. Krishna Prasad¹, G. Manpreet Kaur¹

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.2, pp. 107-125, 2017, DOI:10.3970/fdmp.2017.013.107

Abstract The slow steady rotation of a micropolar fluid spheroid whose shape deviates slightly from that of a sphere in concentric spheroidal container filled with Newtonian viscous fluid is studied analytically. The boundary conditions used are the continuity of velocity and stress components, and spin vorticity relation. The torque and wall correction factor exerted on the micropolar fluid spheroid is obtained. The dependence of wall correction factor on the micropolarity parameter, spin parameter, viscosity ratio and deformation parameter is studied numerically and its variation is presented graphically. In the limiting cases, the torque acting on solid More >

Bin Liu¹, Zhaodan Yang¹, Yahui Wang¹, Rachid Bennacer^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.1, pp. 37-47, 2017, DOI:10.3970/fdmp.2017.013.037

Abstract The dynamic thermal history of storage product system is related to the insulation and also to the inertia. Use a new porous media doped with nanofluid PCM to improve the system efficiency. The analysis of the porous sponge thickness with 8 mm, 16 mm and 20 mm, the integrated nanofluids with 0.1%, 0.15% and 0.2%, the mass of the PCM and the initial temperature of the stored product with -1°C, 4°C, 12°C is achieved in order to underline the advantages of the new saturated porous media (sponges) with the phase change material (PCM) /Al₂O₃-H₂O nanofluid. The… More >

Ilhem Zeghbid¹, Rachid Bessaïh¹

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.4, pp. 251-273, 2017, DOI:10.3970/fdmp.2017.013.251

Abstract This paper presents a numerical study of two-dimensional laminar mixed convection in a lid-driven square cavity filled with a nanofluid and heated simultaneously at a constant heat flux q” by two heat sources placed on the two vertical walls. The movable wall and the bottom wall of the cavity are maintained at a local cold temperature T_C, respectively. The finite volume method was used to solve the equations of flow with heat transfer across the physical domain. Comparisons with previous results were performed and found to be in excellent agreement. Results were presented in terms of… More >

Zhentao Wang^1,*, Kai Dong, Shuiqing Zhan

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.4, pp. 221-234, 2017, DOI:10.3970/fdmp.2017.013.221

Abstract We have investigated the unsteady internal flow occurring in an evaporating droplet interacting with a high-temperature atmospheric environment. The Navier-Stokes equations for both the liquid and the gas phases have been solved numerically in the framework of a Volume of Fluid (VOF) method relying on the so-called Continuum Surface Force (CSF) model. A specific kernel able to account for evaporation and related phase change has been incorporated directly in the VOF approach. The temperature distributions within the droplet has been found to be relatively uniform by virtue of the Marangoni flow. The transient evolution of More >

S. A. Mousavi¹, T. Yousefi², Z. Saghir³

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.4, pp. 213-220, 2017, DOI:10.3970/fdmp.2017.013.213

Abstract The main goal of this study was to investigate the thermal diffusion in ternary hydrocarbon mixtures composed of 1, 2, 3, 4 Tetrahydronaphtalene (THN)-Isobutylbenzene (IBB)-Dodecane (C12) with mass fractions of 80/10/10, 70/10/20, and 60/10/30 at mean temperature of 25 °C. Optical interferometry technique with Mach-Zehnder arrangement was used to conduct the experiments. The mixture was placed in a convectionless cell which was heated from above. The results for the mixture with mass fraction of 80/10/10 were in a good agreement with the corresponding benchmark values. Finally, the Soret coefficient for the other two mixtures have More >

Fatima-zohra Bensouici^{1, *}, Saadoun Boudebous²

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.3, pp. 189-212, 2017, DOI:10.3970/fdmp.2017.013.189

Abstract A numerical work has been performed to analyze the laminar mixed convection of nanofluids confined in a lid driven square enclosure with a central square and isotherm heat source. All the walls are cooled at constant temperature, and the top wall slides rightward at constant velocity. The simulations considered four types of nanofluids (Cu, Ag, Al₂O₃ and TiO₂)-Water. The governing equations were solved using finite volume approach by the SIMPLER algorithm. Comparisons with previously published work are performed and found to be in good agreement. The influence of pertinent parameters such as Richardson number, size of… More >

S. Slama¹, H. Kahalerras¹, B. Fersadou¹

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.3, pp. 155-172, 2017, DOI:10.3970/fdmp.2017.013.155

Abstract A numerical study is conducted to investigate the problem of mixed convection of a nanofluid in a vertical porous channel with one wall heated and the other cooled. The Darcy-Brinkman-Forchheimer model is used to describe the flow in the porous medium, considered as anisotropic in thermal conductivity, and the two-phase approach is adopted to simulate the motion of the nanofluid. The governing equations with the associated boundary conditions are solved by the finite volume method. The parametric study is focused on the variation of the Richardson number Ri, the heat fluxes ratio R_q, the Darcy number… More >

Asghar Esmaeeli¹, Ali Behjatian¹

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.3, pp. 143-153, 2017, DOI:10.3970/fdmp.2017.013.143

Abstract The evolution of the flow field in and around a liquid drop in a unifor-m electric field for fluid systems corresponding to region (II) of the circulation-deformation map is fundamentally different than that for the rest of the map and has not been explored before. This is examined here and justified mathematical-ly. Furthermore a methodology is developed to predict the flow pattern, which is likely to be helpful in predicting the evolution of the flow field in more complex circumstances. More >

K. Bououni¹, T. Jaber¹, S. Elbehissy¹

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.2, pp. 127-141, 2017, DOI:10.3970/fdmp.2017.013.127

Abstract The economic progress in the United Arab Emirates (UAE) induces to a significant increase in the demand for agricultural development. In Emirates the majority of the farms are irrigated by underground water, characterized by a high level of salinity. Liwa, Al Ain and Al Khatem areas are suffering from high water well salinity that exceeds 20,000 ppm. This work focuses on this problem and suggests a suitable solution allowing the use of renewable energy (Solar Photovoltaic) to drive RO desalination units. An optimal design of RO/PV unit adapted to a typical farm in Abu Dhabi More >