Shihong Zhang^* , Fangjing Jia, Rui Zhang

Frontiers in Heat and Mass Transfer, Vol.8, pp. 1-5, 2017, DOI:10.5098/hmt.8.4

Abstract This article discussed the radiation and pollutant emissions characteristics of the catalytic combustion furnace based the combustion of lean natural gas-air mixtures in catalytic honeycomb monoliths and the influence of its exhaust gas on schefflera plants growth by means of theory and experiments. The radiation efficiency of the monolith alone varied from approximately 20% to 40%. The glazed tiles heated by the catalytic combustion furnace are more fine and glossy than that of conventional ones. Schefflera plants in experimental group in a greenhouse filling with catalytic combustion exhaust gas. On contrary, schefflera plants in control group stay in indoor environment.… More >

Shihong Zhang^* , Hui Yang

Frontiers in Heat and Mass Transfer, Vol.12, pp. 1-5, 2019, DOI:10.5098/hmt.12.6

Abstract This article discussed the lifetime of catalyst on cost effect for catalytic combustion furnace and applications of pottery heated by catalytic combustion furnace in purification water. The time of start-up process rises with the increase of the number of ignition. The catalyst sintering was remarkable. By reducing the number of ignition and adjusting the temperature rise uniformly in the furnace, the efficient utilization of thermal energy could be realized to saving production cost and extending the lifetime of catalyst. With exquisite and even-textured surface the pottery had striking purification effect on water. The water purification material of this pottery was… More >

Shihong Zhang^* , Xu Fan

Frontiers in Heat and Mass Transfer, Vol.14, pp. 1-6, 2020, DOI:10.5098/hmt.14.9

Abstract This article discussed compressive strength, water absorption, thermal conductivity and Frost resistance of building glazed tile of fly ash added in order to solve the problem of shortage of raw materials in the production. According to the technology of catalytic combustion furnace, glazed tiles of fly ash added with pure solid texture and glamorous colors were obtained by radiation heat treatment. It also greatly reduced pollutant emissions. The suitable proportion is about 30% of fly ash from these tests and the molding pressure is 20MPa. The utilization of fly ash not only alleviates the environmental pollution, but also saves raw… More >