Chyanbin Hwu¹, T.L. Kuo, Y.C. Chen

CMC-Computers, Materials & Continua, Vol.11, No.3, pp. 165-184, 2009, DOI:10.3970/cmc.2009.011.165

Abstract In this paper the near tip solutions for interface corners written in terms of the stress intensity factors are presented in a unified expression. This single expression is applicable for any kinds of interface corners including corners and cracks in homogeneous materials as well as interface corners and interface cracks lying between two dissimilar materials, in which the materials can be any kinds of linear elastic anisotropic materials or piezoelectric materials. Through this unified expression of near tip solutions, the singular orders of stresses and their associated stress/electric intensity factors for different kinds of interface problems can be determined through… More >

Chein-Shan Liu¹

CMC-Computers, Materials & Continua, Vol.11, No.1, pp. 15-32, 2009, DOI:10.3970/cmc.2009.011.015

Abstract Motivated by the evolutionary and dissipative properties of parabolic type partial differential equation (PDE), Liu (2008a) has proposed a natural and mathematically equivalent approach by transforming the quasilinear elliptic PDE into a parabolic one. However, the above paper only considered a rectangular domain in the plane, and did not treat the difficulty arisen from the quasilinear PDE defined in an arbitrary plane domain. In this paper we propose a new technique of internal and boundary residuals in a fictitious rectangular domain, which are driving forces for the ordinary differential equations based on the Fictitious Time Integration Method (FTIM). Several numerical… More >

J. Ghanbari¹, R. Naghdabadi^1,2

CMC-Computers, Materials & Continua, Vol.10, No.1, pp. 41-64, 2009, DOI:10.3970/cmc.2009.010.041

Abstract Continuum-based modeling of nanostructures is an efficient and suitable method to study the behavior of these structures when the deformation can be considered homogeneous. This paper is concerned about multiscale nonlinear tensorial constitutive modeling of carbon nanostructures based on the interatomic potentials. The proposed constitutive model is a tensorial equation relating the second Piola-Kirchhoff stress tensor to Green-Lagrange strain tensor. For carbon nanotubes, some modifications are made on the planar representative volume element (RVE) to account for the curved atomic structure resulting a non-planar RVE. Using the proposed constitutive model, the elastic behavior of the graphene sheet and carbon nanotube… More >

G. Haasemann¹, M. Kästner¹ and V. Ulbricht¹

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 131-146, 2006, DOI:10.3970/cmc.2006.003.131

Abstract Novel textile reinforced composites provide an extremely high adaptability and allow for the development of materials whose features can be adjusted precisely to certain applications. A successful structural and material design process requires an integrated simulation of the material behavior, the estimation of the effective properties which need to be assigned to the macroscopic model and the resulting features of the component. In this context two efficient modelling strategies - the Binary Model (Carter, Cox, and Fleck (1994)) and the Extended Finite Element Method (X-FEM) (Moës, Cloirec, Cartraud, and Remacle (2003)) - are used to model materials which exhibit a… More >

X.G. Yuan¹, R.J. Zhang²

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 119-130, 2006, DOI:10.3970/cmc.2006.003.119

Abstract In this paper, the problem of cavity formation and motion in an incompressible transversely isotropic nonlinearly elastic solid sphere, which is subjected to a uniform radial tensile dead load on its surface, is examined in the context of nonlinear elastodynamics. The strain energy density associated with the nonlinearly elastic material may be viewed as the generalized forms of some known material models. It is proved that some determinate conditions must be imposed on the form of the strain energy density such that the surface tensile dead load has a finite critical value. Correspondingly, as the surface tensile dead load exceeds… More >

B.B. Karki¹, D. Bhattarai¹, L. Stixrude²

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 107-118, 2006, DOI:10.3970/cmc.2006.003.107

Abstract Computer modeling of liquid phase poses tremendous challenge: It requires a relatively large simulation size, long simulation time and accurate interatomic interaction and as such, it produces massive amounts of data. Recent advances in hardware and software have made it possible to accurately simulate the liquid phase. This paper reports the details of methodology used in the context of liquid simulations and subsequent analysis of the output data. For illustration purpose, we consider the results for the liquid phases of two geophysically relevant materials, namely MgO and MgSiO₃. The simulations are performed using the parallel first-principles molecular dynamics (FPMD) technique… More >

Lingfei Gao¹, Xiaoping Zheng^1,2, Zhenhan Yao¹

CMC-Computers, Materials & Continua, Vol.3, No.1, pp. 25-36, 2006, DOI:10.3970/cmc.2007.003.025

Abstract A general numerical approach is developed to model the elastic behaviours and failure processes of heterogeneous materials. The heterogeneous material body is assumed composed of a large number of convex polygon lattices with different phases. These phases are locally isotropic and elastic-brittle with the different lattices displaying variable material parameters and a Weibull-type statistical distribution. When the effective strain exceeds a local fracture criterion, the full lattice exhibits failure uniformly, and this is modelled by assuming a very small Young modulus value. An auto-select loading method is employed to model the failure process. The proposed hybrid approach is applied to… More >

D. P. Ghosh¹, S. Gopalakrishnan²

CMC-Computers, Materials & Continua, Vol.1, No.3, pp. 213-228, 2004, DOI:10.3970/cmc.2004.001.213

Abstract Anhysteretic, coupled, linear and nonlinear constitutive relationship for magnetostrictive material is studied in this paper. Constitutive relationships of magnetostrictive material are represented through two equations, one for actuation and other for sensing, both of which are coupled through magneto-mechanical coefficient. Coupled model is studied without assuming any explicit direct relationship with magnetic field. In linear-coupled model, which is assumed to preserve the magnetic flux line continuity, the elastic modulus, the permeability and magneto-elastic constant are assumed as constant. In nonlinear-coupled model, the nonlinearity is decoupled and solved separately for the magnetic domain and mechanical domain using two nonlinear curves, namely… More >