Branden B. Kappes¹, Cristian V. Ciobanu²

CMC-Computers, Materials & Continua, Vol.38, No.1, pp. 1-16, 2013, DOI:10.3970/cmc.2013.038.001

Abstract Controlling the bandgap of carbon nanostructures is a key factor in the development of mainstream applications of carbon-based nanoelectronic devices. This is particularly important in the cases where it is desired that the carbon nanostructures are the active elements, as opposed to being the conductive leads between other elements of the device. Here, we report density functional theory calculations of the effect of silicon impurities on the electronic properties of carbon nanotubes (CNTs). We have found that Si adatoms can open up a bandgap in intrinsically metallic CNTs, even when the linear density of Si atoms is low enough that… More >

Raveendranath U Nair¹, R M Jha¹

CMC-Computers, Materials & Continua, Vol.37, No.2, pp. 109-121, 2013, DOI:10.3970/cmc.2013.037.109

Abstract Enhancement of electromagnetic performance of A-sandwich radome using aperture-type Jerusalem cross frequency selective surface (FSS) is presented. The Jerusalem cross FSS array is embedded in the mid-plane of the core of Asandwich radome to enhance the EM performance parameters over the entire Xband. For modeling the Jerusalem cross FSS embedded radome panel and evaluation of its EM performance parameters, equivalent transmission line method in conjunction with equivalent circuit model is used. A comparative study of Jerusalem cross FSS embedded A-sandwich radome and A-sandwich radome of identical material and thickness (core and skin layers) indicate that the new wall configuration has… More >

Shiv Narayan¹, R M Jha¹

CMC-Computers, Materials & Continua, Vol.37, No.2, pp. 97-108, 2013, DOI:10.3970/cmc.2013.037.097

Abstract A novel metamaterial based FSS (frequency selective surfaces) structure is presented in this paper for wideband airborne radome applications. The proposed metamaterial-FSS structure consists of three layers, where a DPS (double positive sign) layer is sandwiched between a MNG (μ-negative) and ENG (ε- negative) layer, exhibits very good bandpass characteristics inside the operational band along with excellent roll-off characteristics outside the band. The EM performance analysis of the proposed structure has been carried out using transmission line transfer matrix (TLTM) method, which shows excellent bandpass characteristics over a wide frequency range. The transmission efficiency is over 95% both at normal… More >

Yao Hsu¹, Chih-Yen Su², Wen-Fang Wu^3,4

CMC-Computers, Materials & Continua, Vol.36, No.2, pp. 155-176, 2013, DOI:10.3970/cmc.2013.036.155

Abstract To study the fatigue reliability of a flip-chip chip scale package (FCCSP) subject to thermal cyclic loading, a Monte Carlo simulation-based parametric study is carried out in the present study. A refined procedure as compared with the recently released Probabilistic Design System (PDS) of ANSYS is proposed and employed in particular. The thermal-cyclic fatigue life of the package is discussed in detail since it is related directly to the reliability of the package. In consideration of the analytical procedure as well as real manufacturing processes, a few geometric dimensions and material properties of the package are assumed random. The empirical… More >

K. Mramor¹, R. Vertnik^2,3, B. Šarler^1,3,4,5

CMC-Computers, Materials & Continua, Vol.36, No.1, pp. 1-21, 2013, DOI:10.3970/cmc.2013.036.001

Abstract This paper explores the application of Local Radial Basis Function Collocation Method (LRBFCM) [Šarler and Vertnik (2006)] for solution of Newtonian incompressible 2D fluid flow for a lid driven cavity problem [Ghia, Ghia, and Shin (1982)] in primitive variables. The involved velocity and pressure fields are represented on overlapping five-noded sub-domains through collocation by using Radial Basis Functions (RBF). The required first and second derivatives of the fields are calculated from the respective derivatives of the RBF’s. The momentum equation is solved through explicit time stepping. The method is alternatively structured with multiquadrics and inverse multiquadrics RBF’s. In addition, two… More >

M. Chatiri¹, A. Matzenmiller²

CMC-Computers, Materials & Continua, Vol.35, No.3, pp. 255-283, 2013, DOI:10.3970/cmc.2013.035.255

Abstract This article presents a three dimensional constitutive model for anisotropic damage to describe the elastic-brittle behavior of unidirectional fibrereinforced laminated composites. The primary objective of the article focuses on the three dimensional relationship between damage of the material and the effective elastic properties for the purpose of stress analysis of composite structures, in extension to the two dimensional model in Matzenmiller, Lubliner and Taylor (1995). A homogenized continuum is adopted for the constitutive theory of anisotropic damage and elasticity. Damage initiation criteria are based on Puck failure criterion for first ply failure and progressive micro crack propagation is based on… More >

K. C. Liu¹, S. M. Arnold²

CMC-Computers, Materials & Continua, Vol.35, No.1, pp. 35-65, 2013, DOI:10.3970/cmc.2013.035.035

Abstract It is well known that failure of a material is a locally driven event. In the case of ceramic matrix composites (CMCs), significant variations in the microstructure of the composite exist and their significance on both deformation and life response need to be assessed. Examples of these variations include changes in the fiber tow shape, tow shifting/nesting and voids within and between tows. In the present work, the influence of many of these scale specific architectural features of woven ceramic composite are examined stochastically at both the macroscale (woven repeating unit cell (RUC)) and structural scale (idealized using multiple RUCs).… More >

Chih-Wen Chang^1,2, Chein-Shan Liu³

CMC-Computers, Materials & Continua, Vol.34, No.2, pp. 143-175, 2013, DOI:10.3970/cmc.2013.034.143

Abstract The nonlinear Poisson problems in heat diffusion governed by elliptic type partial differential equations are solved by a modified globally optimal iterative algorithm (MGOIA). The MGOIA is a purely iterative method for searching the solution vector x without using the invert of the Jacobian matrix D. Moreover, we reveal the weighting parameter αc in the best descent vector w = αcE + DTE and derive the convergence rate and find a criterion of the parameter γ. When utilizing αc and γ, we can further accelerate the convergence speed several times. Several numerical experiments are carefully discussed and validated the proposed… More >

Shiv Narayan¹, Latha S.¹, R M Jha¹

CMC-Computers, Materials & Continua, Vol.34, No.2, pp. 131-142, 2013, DOI:10.3970/cmc.2013.034.131

Abstract The EM performance analysis of a multilayered metamaterial based radar absorbing structure (RAS) has been presented in this paper based on transmission line transfer matrix (TLTM) method for millimeter wave applications. The proposed metamaterial-RAS consists of cascaded DPS and MNG layers of identical configurations. It exhibits extremely low reflection (< 42 dB) at 95 GHz and absorbs more than 95% power of incident wave over the frequency range of 90.4- 100 GHz without metal backing for both TE and TM polarizations. In view of aerospace applications, the reflection, transmission, and absorption characteristics of the proposed metamaterial-RAS are also studied at… More >

Yi Xiao¹, Qing H. Qin¹

CMC-Computers, Materials & Continua, Vol.34, No.2, pp. 95-115, 2013, DOI:10.3970/cmc.2013.034.095

Abstract In this paper, we propose a new approach of optical full-field measurement for displacement calculation on the surface of a cellular solid. Cell boundary points are sampled as nodes in the analysis. To find the nodal values of displacements the nodes are to be mapped onto their corresponding points in the deformed cell boundary by shape based point matching. A thin plate spline based robust point matching (TPS-RPM) approach is used instead of correlation of intensity pattern between two regions in traditional displacement measurement methods. The proposed approach involves multiple-step image processing including cell region segmentation, cell region matching and… More >