Junhui Li¹, Xuanzhong Luo^1,2, Changxing Ge³, Cuiping Li^1,*, Changrong Wang⁴

Energy Engineering, Vol.121, No.4, pp. 869-893, 2024, DOI:10.32604/ee.2024.029722

Abstract Peak load and wind energy emission pressure rise more as wind energy penetration keeps growing, which affects the stabilization of the PS (power system). This paper suggests integrated optimal dispatching of thermal power generators and BESS (battery energy storage system) taking wind energy emission grading punishment and deep peak clipping into consideration. Firstly, in order to minimize wind abandonment, a hierarchical wind abandonment penalty strategy based on fuzzy control is designed and introduced, and the optimal grid-connected power of wind energy is determined as a result of minimizing the peak cutting cost of the system. Secondly, considering BESS and thermal… More > Graphic Abstract

Fuyin Ni^1,2, Kai Li^2,*

Energy Engineering, Vol.120, No.5, pp. 1203-1221, 2023, DOI:10.32604/ee.2023.025796

Abstract Unified power quality conditioner (UPQC) with energy storage is commonly based on conventional capacity configuration strategy with power angle control. It has problems such as phase jumping before and after compensation. DC-link cannot continuously emit active power externally. Therefore, this paper presents the compensation strategy of full load voltage magnitude and phase in capacity configuration of UPQC. The topology of UPQC is integrated a series active power filter (SAPF), a shunt active power filter (PAPF) and a photovoltaic-battery energy storage system (PV-BESS). The principle of full load voltage compensation is analyzed based on the PV-BESS-UPQC topology. The magnitude constant of… More > Graphic Abstract

Ahmed Hammoodi¹, Lukman Audah¹ , Laith Al-Jobouri^2,*, Mazin Abed Mohammed³, Mustafa S. Aljumaily⁴

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 2721-2738, 2022, DOI:10.32604/cmc.2022.020091

Abstract OFDM based waveforms are considered as the main part of the latest cellular communications standard (namely 5G). Many inherited problems from the OFDM-Based LTE are still under investigation. Getting rid of the out of band emissions is one of these problems. Ensuring low out of band emission (OOBE) is deemed as one of the most critical challenges to support development of future technologies such as 6G and beyond. Universal Filtered Multi Carrier (UFMC) has been considered as one of the candidate waveforms for the 5G communications due to its robustness against Inter Carrier Interference (ICI) and the Inter Symbol Interference… More >

Yan Hong¹, Bai-Ni Guo^2,*, Feng Qi³

CMES-Computer Modeling in Engineering & Sciences, Vol.129, No.1, pp. 409-423, 2021, DOI:10.32604/cmes.2021.016431

Abstract In the paper, by virtue of a general formula for any derivative of the ratio of two differentiable functions, with the aid of a recursive property of the Hessenberg determinants, the authors establish determinantal expressions and recursive relations for the Bessel zeta function and for a sequence originating from a series expansion of the power of modified Bessel function of the first kind. More >

G. Savaidis¹, N. Pitatzis¹, A. Savaidis¹, Ch. Zhang²

Structural Durability & Health Monitoring, Vol.4, No.3, pp. 145-160, 2008, DOI:10.3970/sdhm.2008.004.145

Abstract This paper presents an elastic-plastic finite element analysis of a circumferentially notched cylinder subjected to multiaxial non-proportional fatigue loading. Two different load combinations are investigated: (1) constant tension with cyclic torsion and (2) constant torsion with cyclic tension. The multilayer plasticity model of Besseling in conjunction with the von Mises yield criterion is applied to describe the elastic-plastic material behaviour. The parametrical study contains a coarse and a fine finite element mesh with and without mid-nodes as well as three different types of multilinear approximations of the material law, namely, a twenty-segments, a five-segments and a three-segments one. The comparison… More >

A. Sellier¹, S. H. Aydin², M. Tezer-Sezgin³

CMES-Computer Modeling in Engineering & Sciences, Vol.102, No.5, pp. 393-406, 2014, DOI:10.3970/cmes.2014.102.393

Abstract The fundamental free-space 2D steady creeping MHD flow produced by a concentrated point force of strength g located at a so-called source point x₀ in an unbounded conducting Newtonian liquid with uniform viscosity µ and conductivity σ > 0 subject to a prescribed uniform ambient magnetic field B = Be₁ is analytically obtained. More precisely, not only the produced flow pressure p and velocity u but also the resulting stress tensor field σ are expressed at any observation point x ≠ x₀ in terms of usual modified Bessel functions, the vectors g, x-x₀ and the so-called Hartmann layer thickness d… More >