Home / Advanced Search

  • Title/Keywords

  • Author/Affliations

  • Journal

  • Article Type

  • Start Year

  • End Year

Update SearchingClear
  • Articles
  • Online
Search Results (4)
  • Open Access

    ARTICLE

    3D NUMERICAL ANALYSIS ON FLOW CONFIGURATIONS AND HEAT TRANSFER CHARACTERISTICS FOR FIN-AND-OVAL-TUBE HEAT EXCHANGER WITH V-DOWNSTREAM DELTA WINGLET VORTEX GENERATORS

    Amnart Boonloia, Withada Jedasadaratanachaib,*

    Frontiers in Heat and Mass Transfer, Vol.5, pp. 1-15, 2014, DOI:10.5098/hmt.5.19

    Abstract 3D numerical investigations for heat transfer characteristics and flow configurations in a fin–and-oval-tube heat exchanger with V-tip pointing downstream delta winglet pairs (DDWP) are examined. The DDWPs are placed on the fin surface with pointing downstream and the oval tube row number is set at three in a staggered arrangement. The flow attack angles (θ = 15°, 30°, 45° and 60°) and the distance from V-tip to the oval tube center in transverse axis (a = 3.77, 4.77 and 5.77 mm) are investigated for Reynolds number based on hydraulic diameter, Re = 500 – 2500. The numerical results are compared… More >

  • Open Access

    ARTICLE

    INFLUENCES OF THE PUNCHED DELTA WINGLET VORTEX GENERATORS IN A CIRCULAR TUBE HEAT EXCHANGER ON THERMO-HYDRAULIC PERFORMANCE

    Withada Jedsadaratanachaia, Amnart Boonloib,*

    Frontiers in Heat and Mass Transfer, Vol.6, pp. 1-19, 2015, DOI:10.5098/hmt.6.13

    Abstract Numerical investigations on flow topology, heat transfer behavior and thermal performance evaluation in a circular tube heat exchanger with the punched delta winglet vortex generators (PDWVG) inserted in the middle of the test section are presented. The effects of the flow attack angles that converging to the center of the tube; α = 0°, 5°, 10°, 15°, 20°, 25°, and flow directions; winglet tips pointing downstream and upstream, are investigated for the Reynolds numbers; Re = 100 – 2000. The finite volume method and SIMPLE algorithm are used for the current study. The results are presented in terms of flow… More >

  • Open Access

    ARTICLE

    NUMERICAL INVESTIGATIONS ON HEAT TRANSFER AND FLOW STRUCTURE IN A CIRCULAR TUBE WITH VARIOUS SHAPES OF WINGLET VORTEX GENERATORS

    Amnart Boonloia, Withada Jedsadaratanachaib,*

    Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-16, 2016, DOI:10.5098/hmt.7.22

    Abstract The numerical investigations on flow structure, heat transfer characteristic and thermal performance in a circular tube heat exchanger with various shapes of winglet vortex generators are reported. The rectangular winglet vortex generators (RWVG), delta winglet vortex generators (DWVG) and curve winglet vortex generators (CWVG) are inserted in the middle of the test tube on both downstream and upstream arrangements. The effects of blockage ratios; BR = 0.1 – 0.3, with single pitch ratio (PR = 1) and flow attack angle (α = 30o) on thermal performance are studied for the Reynolds numbers; Re = 100 – 2000. The numerical results… More >

  • Open Access

    ARTICLE

    NUMERICAL STUDY OF FIN-TUBE TYPE HEAT EXCHANGER WITH DELTA WINGLETS

    Divyprakash C. Pal, Abhik Majumder*

    Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-9, 2016, DOI:10.5098/hmt.7.1

    Abstract In this present work heat transfer characteristics, thermal performance and pressure drop are studied numerically for a finned-tube bank heat exchanger with Delta Winglet Vortex Generator (DWVG) on the fin at different angle of attack (α). The thermo-fluid is studied by varying α at 15o , 25o , 30o and 35o . The base length (lDW) of the winglet also varied from 20mm to 35mm. The heat transfer coefficient and pressure drop increased in all the cases with increase in Reynolds number. However, significant increase in heat transfer of about 23.92% was observed for α at 35o when compared with… More >

Displaying 1-10 on page 1 of 4. Per Page