Shengjun Deng^1,2,3,*, Yang He¹, Xiaonan Gong², Jiajin Zhou², Xiangdong Hu⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.134, No.1, pp. 495-516, 2023, DOI:10.32604/cmes.2022.020386

Abstract Due to the large number of finite element mesh generated, it is difficult to use full-scale model to simulate largesection underground engineering, especially considering the coupling effect. A regional model is attempted to achieve this simulation. A variable boundary condition method for hybrid regional model is proposed to realize the numerical simulation of large-section tunnel construction. Accordingly, the balance of initial ground stress under asymmetric boundary conditions achieves by applying boundary conditions step by step with secondary development of Dynaflow scripts, which is the key issue of variable boundary condition method implementation. In this paper, Gongbei tunnel based on hybrid… More >

Shengjun Deng^1,2,3, Haolin Chen¹, Xiaonan Gong², Jiajin Zhou², Xiangdong Hu⁴, Gang Jiang^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.132, No.1, pp. 251-266, 2022, DOI:10.32604/cmes.2022.020388

Abstract Freeze-sealing pipe roof method is applied in the Gongbei tunnel, which causes the ground surface uplift induced by frost heave. A frost heaving prediction approach based on the coefficient of cold expansion is proposed to simulate the ground deformation of the Gongbei tunnel. The coefficient of cold expansion in the model and the frost heaving rate from the frost heave test under the hydration condition can achieve a good correspondence making the calculation result closer to the actual engineering. The ground surface uplift along the lateral and longitudinal direction are respectively analyzed and compared with the field measured data to… More >