Zhijian Yang¹, Guochang Li^1,*, Yan Lang², Zengmei Qiu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 273-290, 2021, DOI:10.32604/cmes.2021.014606

Abstract This paper studies the contribution of CFRP (carbon fiber-reinforced polymer) to the mechanical behavior of high strength concrete-filled square steel tube (HCFST) under biaxial eccentric compression. The new type of composite member is composed of an inner CFRP tube and an outer steel tube with concrete filled in the two tubes. The finite element analysis was made by ABAQUS on the behavior of high strength concrete filled square steel tubular columns with inner CFRP circular tube subjected to bi-axial eccentric loading. The results obtained from the finite element analysis were verified with the experimental results. In addition, the load-deflection curves… More >

Roberta Apostolska¹, Golubka Necevska-Cvetanovska²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.5, No.2, pp. 129-136, 2008, DOI:10.3970/icces.2008.005.129

Abstract The IZIIS' contribution to development of high quality materials has been seen in realization of several scientific-research projects in the field of high strength concrete in the period from 1992 to 2006. Within the frames of these projects complex laboratory-experimental-analytical investigations have been performed to contribute to definition of the methodology for obtaining high stength concrete exclusively from domestic resources, to investigate joint behaviour of high strength materials and elements in nonlinear range as well as to define dynamic behaviour high strength concrete buildings exposed to seismic actions. The selected results from these investigations are presented in the paper. More >

A. Ramachandra Murthy¹, Nagesh R. Iyer¹, B.K. Raghu Prasad²

CMC-Computers, Materials & Continua, Vol.31, No.3, pp. 229-252, 2012, DOI:10.3970/cmc.2012.031.229

Abstract This paper presents the advanced analytical methodologies such as Double- G and Double - K models for fracture analysis of concrete specimens made up of high strength concrete (HSC, HSC1) and ultra high strength concrete. Brief details about characterization and experimentation of HSC, HSC1 and UHSC have been provided. Double-G model is based on energy concept and couples the Griffith's brittle fracture theory with the bridging softening property of concrete. The double-K fracture model is based on stress intensity factor approach. Various fracture parameters such as cohesive fracture toughness (K_Ic^c), unstable fracture toughness (K_Ic^un) and initiation fracture toughness… More >

A. Ramachandra Murthy¹, Nagesh R. Iyer¹, B.K. Raghu Prasad²

CMC-Computers, Materials & Continua, Vol.30, No.2, pp. 177-194, 2012, DOI:10.3970/cmc.2012.030.177

Abstract This paper presents the details of nonlinear finite element analysis (FEA) of three point bending specimens made up of high strength concrete (HSC, HSC1) and ultra high strength concrete (UHSC). Brief details about characterization and experimentation of HSC, HSC1 and UHSC have been provided. Cracking strength criterion has been used for simulation of crack propagation by conducting nonlinear FEA. The description about FEA using crack strength criterion has been outlined. Bi-linear tension softening relation has been used for modeling the cohesive stresses ahead of the crack tip. Numerical studies have been carried out on fracture analysis of three point bending… More >

Shantaram Parab¹, Shreya Srivastava², Pijush Samui³, A. Ramachandra Murthy⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.101, No.2, pp. 139-158, 2014, DOI:10.3970/cmes.2014.101.139

Abstract This paper studies the applicability of Gaussian Process Regression (GPR) and Least Squares Support Vector Machines (LSSVM) to predict fracture parameters and failure load (P_max) of high strength and ultra-high strength concrete beams. Fracture characteristics include fracture energy (G_F), critical stress intensity factor (K_IC) and critical crack tip opening displacement (CTOD_C) Mathematical models have been developed in the form of relation between several input variables such as beam dimensions, water cement ratio, compressive strength, split tensile strength, notch depth, modulus of elasticity and output fracture parameters. Four GPR and four LSSVM models have been developed using MATLAB software for training… More >

A. Ramachandra Murthy¹, Nagesh R. Iyer¹, B.K. Raghu Prasad²

CMES-Computer Modeling in Engineering & Sciences, Vol.89, No.6, pp. 459-480, 2012, DOI:10.3970/cmes.2012.089.459

Abstract This paper presents the details of crack growth study and remaining life assessment of concrete specimens made up of high strength concrete (HSC, HSC1) and ultra high strength concrete (UHSC). Flexural fatigue tests have been conducted on HSC, HSC1 and UHSC beams under constant amplitude loading with a stress ratio of 0.2. It is observed from the studies that (i) the failure patterns of HSC1 and UHSC beams indicate their ductility as the member was intact till the crack propagated up to 90% of the beam depth and (ii) the remaining life decreases with increase of notch depth (iii) the… More >

A. Ramach,ra Murthy^1,2, V. Ramesh Kumar¹, Smitha Gopinath¹, PrabhatRanjan Prem¹, Nagesh R. Iyer³, Reshmi Balakrishnan⁴

CMC-Computers, Materials & Continua, Vol.44, No.1, pp. 59-72, 2014, DOI:10.3970/cmc.2014.044.059

Abstract This paper investigates the flexural performance of a sandwich panel made up of ultra high strength concrete (UHSC) as top and bottom skin and cold formed steel as sandwich. A novel sandwich panel has been designed such a way that bottom skin of UHSC is of precast in nature and top skin of UHSC is cast-insitu and cold formed steel (profiled sheet) as sandwich. The connection between top skin of UHSC and cold formed steel is made with self tapping screws. Flexural performance of UHSC sandwich panel has been tested under flexural loading and it is found that the post… More >

Vishal Shreyans Shah¹, Henyl Rakesh Shah², Pijush Samui³, A. Ramachra Murthy⁴

CMC-Computers, Materials & Continua, Vol.44, No.2, pp. 73-84, 2014, DOI:10.3970/cmc.2014.044.073

Abstract This paper deals with the development of models for prediction of facture parameters, namely, fracture energy and ultimate load of high strength and ultra high strength concrete based on Minimax Probability Machine Regression (MPMR) and Extreme Learning Machine (ELM). MPMR is developed based on Minimax Probability Machine Classification (MPMC). ELM is the modified version of Single Hidden Layer Feed Foreword Network (SLFN). MPMR and ELM has been used as regression techniques. Mathematical models have been developed in the form of relation between several input variables such as beam dimensions, water cement ratio, compressive strength, split tensile strength, notch depth, and… More >

Yuvaraj P¹, A Ramachra Murthy², Nagesh R Iyer³, S.K. Sekar⁴, Pijush Samui⁵

CMC-Computers, Materials & Continua, Vol.41, No.3, pp. 193-214, 2014, DOI:10.3970/cmc.2014.041.193

Abstract This paper presents fracture mechanics based Artificial Neural Network (ANN) model to predict the fracture characteristics of high strength and ultra high strength concrete beams. Fracture characteristics include fracture energy (Gf), critical stress intensity factor (KIC) and critical crack tip opening displacement (CTODc). Failure load of the beam (Pmax) is also predicated by using ANN model. Characterization of mix and testing of beams of high strength and ultra strength concrete have been described. Methodologies for evaluation of fracture energy, critical stress intensity factor and critical crack tip opening displacement have been outlined. Back-propagation training technique has been employed for updating… More >

P. Yuvaraj¹, A. Ramachandra Murthy², Nagesh R. Iyer³, Pijush Samui⁴, S.K. Sekar⁵

CMC-Computers, Materials & Continua, Vol.36, No.1, pp. 73-97, 2013, DOI:10.3970/cmc.2013.036.073

Abstract This paper presents Multivariate Adaptive Regression Splines (MARS) model to predict the fracture characteristics of high strength and ultra high strength concrete beams. Fracture characteristics include fracture energy (GF), critical stress intensity factor (KIC) and critical crack tip opening displacement (CTODc). This paper also presents the details of development of MARS model to predict failure load (Pmax) of high strength concrete (HSC) and ultra high strength concrete (UHSC) beam specimens. Characterization of mix and testing of beams of high strength and ultra strength concrete have been described. Methodologies for evaluation of fracture energy, critical stress intensity factor and critical crack… More >