Zhengong Zhou¹, Shuang Tian^1,2, Jiawei Zhang³

CMC-Computers, Materials & Continua, Vol.52, No.2, pp. 105-121, 2016, DOI:10.3970/cmc.2016.052.105

Abstract The methods of numerical simulation and test are combined to analyze the impact behavior of glass fiber reinforced aluminum alloy laminate (GLARE). A new failure criteria is proposed to obtain the impact failure of GLARE, and combined with material progressive damage method by writing code of LS-DYNA. Low velocity impact test of GLARE is employed to validate the feasibility of the finite element model established. The simulation results have been shown that progressive damage finite element model established is reliable. Through the application of the finite element model established, the delamination of GLARE evolution progress is simulated, various failure modes… More >

G. Smith¹, E. Schlangen², P.E.J. Flewitt³, A.G. Crocker⁴, A. Hodgkins⁵

CMC-Computers, Materials & Continua, Vol.51, No.3, pp. 163-185, 2016, DOI:10.3970/cmc.2016.051.163

Abstract Two linked models have been developed to explore the relationship between the amount of porosity arising in service from both radiolytic oxidation and fast neutron damage that influences both the strength and the force-displacement (load-displacement) behaviour and crack propagation in pile grade A graphite used as a nuclear reactor moderator material. Firstly models of the microstructure of the porous graphite for both unirradiated and irradiated graphite are created. These form the input for the second stage, simulating fracture in lattice-type finite element models, which predicts force (load)-displacement and crack propagation paths. Microstructures comprising aligned filler particles, typical of needle coke,… More >

A. M. Abd-Alla^1,2,3, Mohamed I. A. Othman^1,4, S. M. Abo-Dahab^1,5

CMC-Computers, Materials & Continua, Vol.51, No.2, pp. 63-79, 2016, DOI:10.3970/cmc.2016.051.063

Abstract The aim of this paper is to study the reflection of plane harmonic waves from a semi-infinite elastic solid under the effect of magnetic field in a vacuum. The expressions for the reflection coefficients, which are the relations of the amplitudes of the reflected waves to the amplitude of the incident waves, are obtained. Similarly, the reflection coefficient ratio variations with the angle of incident under different conditions are shown graphically. Comparisons are made with the results predicted by the dual-phase-lag model and Lord-Shulman theory in the presence and absence of magnetic field. More >

Shifeng Xue^1,2, Xiuxing Zhu^1,2, Lin Zhang³, Shenghu Zhu⁴, Guigen Ye^1,5

CMC-Computers, Materials & Continua, Vol.51, No.1, pp. 21-42, 2016, DOI:10.3970/cmc.2016.051.021

Abstract A perforating hole is a channel through which the oil and gas in a reservoir pass into the production well bore. During the process of perforating due to explosion, the surrounding sandstone will be damaged to a certain extent, which will increase the well bore skin and lead to the decrease of production consequently. In this work a mechanical model of perforating damage is developed to describe the influences of perforating due to explosion on the porosity and permeability of the surrounding sandstone near the compaction zone. Based on this developed model, the important data related to the damage of… More >

H. Khellafi¹, H.M. Meddah¹, B. Ould Chikh¹, B. Bouchouicha², M. Benguediab², M. Bendouba³

CMC-Computers, Materials & Continua, Vol.49-50, No.1, pp. 31-45, 2015, DOI:10.3970/cmc.2015.049.031

Abstract The polyvinyl chloride PVC is a polymer material widely used for a large variety of applications. The present work focuses on the identification of the physical processes responsible for the mechanical properties of the PVC containing different crystallinities rate applied in large deformation and different strain rates. In order to understand the behavior of the PVC, a thermodynamic modeling is needed. Therefore, the contribution of this approach was demonstrated by experiment and numerical modeling. This comparative study demonstrates that the proposed model provides better agreement with experimental evidence. More >

Guoquan Nie^1,2, Jinxi Liu¹, Ming Li¹

CMC-Computers, Materials & Continua, Vol.48, No.3, pp. 133-145, 2015, DOI:10.3970/cmc.2015.048.133

Abstract Propagation of SH-type guided waves in a layered structure with an invariant initial stress is studied, where a piezoelectric thin layer is perfectly bonded on a piezomagnetic substrate. Both the layer and the substrate possess transversely isotropic property. The dispersion relations of SH waves are obtained for four kinds of different electro-magnetic boundary conditions. The effects of initial stress, thickness ratio and electro-magnetic boundary conditions on the propagation behaviors are analyzed in detail. The numerical results show that: 1) The positive initial stresses make the phase velocity increasing, while the negative initial stresses decrease the phase velocity; 2) The smaller… More >

H.T. Li^1,2,3, Z.Y. Guo^1,2, J. Wen^1,2, H.G. Xiang^1,2, Y.X. Zhang^1,2

CMC-Computers, Materials & Continua, Vol.48, No.2, pp. 91-102, 2015, DOI:10.3970/cmc.2015.048.091

Abstract Ferromagnetic shape memory alloy particulate composites, which combine the advantages of large magnetic field induced deformation in ferromagnetic shape memory alloys (FSMAs) with high ductility in matrix, can be used for sensor and actuator applications. In this paper, a new constitutive model was proposed to predict the magneto-mechanical behaviors of FSMA particulate composites based on the description for FSMAs, incorporating Eshelby’s equivalent inclusion theory. The influencing factors, such as volume fraction of particles and elastic modulus, were analyzed. The magnetic field induced strain and other mechanical properties under different magnetic field intensity were also investigated. More >

Yi Xue^1,2, Feng Gao^1,2,3, Xingguang Liu⁴, Xiru Li²

CMC-Computers, Materials & Continua, Vol.47, No.2, pp. 127-141, 2015, DOI:10.3970/cmc.2015.047.127

Abstract In order to study the effect of high pressure water jet cutting technology on the permeability of single coal seam, we use the damage variable to describe the fracture distribution of coal seam, develop the 3-D finite element program based on the damage theory, and then analyze the damage distribution of coal seam after drilling and slotting. Using MTS815 rock mechanics testing system and the permeability test system, we conduct the permeability test and get the relationship between permeability and damage. Based on the damage distribution of coal seam after drilling and slotting and the permeability change law, we analyze… More >

P.A. Meroño¹, F.C. Gómez², F. Marín¹

CMC-Computers, Materials & Continua, Vol.47, No.2, pp. 107-125, 2015, DOI:10.3970/cmc.2015.047.107

Abstract This work represents a comparative study of Wavelet Transform of angular vibration signal and the traditional Fourier analysis applied to the signals of angular vibration, in one transmission which involve gears. How it is known, the elastic deformation of the material, together with the superficial irregularities of the teeth due to wear, provoke characteristic angular oscillations, which make it possible to distinguish between the regular functioning of a mechanism in good condition and the angular vibrations provoked by wear and the superficial irregularities of teeth in poor condition. However, the character of the vibrations produced in such circumstances means that… More >

N. Ma^1,2, K. Sato³, K. Takada⁴

CMC-Computers, Materials & Continua, Vol.46, No.3, pp. 195-219, 2015, DOI:10.3970/cmc.2015.046.195

Abstract The local mechanical behaviors of advanced high strength steels undergoing a very large strain from uniform plastic deformation to fracture were investigated with the aid of a measured displacement field and a measurement based FEM. As a measurement method, a digital image grid method (DIGM) was developed and the three-direction transient displacement field on uniaxial tensile test pieces was measured. Combining the measured transient displacement field with the finite element method, a measurement based FEM (M-FEM) was developed for the computation of distribution of the local strains, local stresses and ductile damage accumulation in a tensile test piece. Furthermore, the… More >