Xin Han^1,4, Zhichao Lou^1,3,4,*, Chenglong Yuan^1,4, Xinwu Wu^1,4, Jie Liu^1,4, Fujin Weng², Yanjun Li^1,4,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3313-3334, 2022, DOI:10.32604/jrm.2022.021066

Abstract With the aim of utilizing reconstituted bamboo as a carbon cycle-oriented material, the improvement of physical and mechanical properties has been actively studied to solve using problems. The saturated steam heat treatment process has been widely used in worldwide. With the development and exploration of this technology, two-step saturated steam heat treatment process appears in some practical production, that is, after a period of saturated steam heat treatment at a lower temperature, the bamboo bundles are taken out and seasoned for a period of time, and then put back into the heat tank again, and heated at a higher temperature… More >

Biqing Shu^1,2, Lu Hong³, Suxia Li^1,4, Yupeng Tao², Jianxin Cui¹, Naiqiang Fu², Junbao Yu², Chen Li², Xiaoning Lu^1,*

Journal of Renewable Materials, Vol.10, No.8, pp. 2203-2216, 2022, DOI:10.32604/jrm.2022.019882

Abstract In this work, we used tensile tests to analyze the tangential failure forms of raw bamboo and determine a relationship between tangential tensile strength, elastic modulus, position, density, and moisture content. We found that the tangential mechanical properties of the culm wall were mainly dependent on the mechanical properties of the basic structure of the thin wall. Formulas for calculating the tangential tensile strength of moso bamboo and adjusting the moisture content were also determined. The tangential tensile strength and the tangential tensile modulus of elasticity (TTMOE) followed: outer > middle > inner, and diaphragm > bamboo node > culm… More >