Zipu Yan^1,2, Honghua Dai^1,2,*, Xiaokui Yue^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.09138

Abstract As a significant research interest in orbital mechanics, periodic orbits are fundamental for understanding orbital behaviors and space explorations. Although the harmonic balance (HB) method and its variants have been the most widely-used approaches for periodic dynamical systems, they are seldom applied to celestial dynamics. Here we use the reconstruction harmonic balance (RHB) method for solving periodic orbits. Starting from a presupposed Fourier form and an initial guess at the solution, the algorithm uses timedomain collocation points to optimally reconstruct the high-order HB procedure without complicated symbolic operations and non-physical solutions. Following a description of the method, it is applied… More >

Yuhao Yang¹, Yingjun Wang^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09068

Abstract In the intelligent structural optimization, designers can obtain a high-performance design scheme automatically with the help of topology optimization (TO). Since computer aided design (CAD) and computer aided engineering (CAE) models have different geometric representations in TO, the optimized results must be reconstructed to generate CAD models, which is complicated and time-consuming. To address this issue, the isogeometric analysis (IGA) is employed in TO to replace the finite element method (FEM), and such TO is termed as isogeometric TO (ITO). ITO is an advanced TO method with high efficiency and accuracy. It uses the same non-uniform rational B-spline (NURBS) basis… More >

Jing Xin^1,*, Kenan Du¹, Jiale Feng¹, Mao Shan²

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2621-2640, 2023, DOI:10.32604/cmes.2023.027467

Abstract This paper proposes an improved high-precision 3D semantic mapping method for indoor scenes using RGB-D images. The current semantic mapping algorithms suffer from low semantic annotation accuracy and insufficient real-time performance. To address these issues, we first adopt the Elastic Fusion algorithm to select key frames from indoor environment image sequences captured by the Kinect sensor and construct the indoor environment space model. Then, an indoor RGB-D image semantic segmentation network is proposed, which uses multi-scale feature fusion to quickly and accurately obtain object labeling information at the pixel level of the spatial point cloud model. Finally, Bayesian updating is… More >

H. Shalma, P. Selvaraj^*

Intelligent Automation & Soft Computing, Vol.37, No.1, pp. 1145-1161, 2023, DOI:10.32604/iasc.2023.036853

Abstract The creation of the 3D rendering model involves the prediction of an accurate depth map for the input images. A proposed approach of a modified semi-global block matching algorithm with variable window size and the gradient assessment of objects predicts the depth map. 3D modeling and view synthesis algorithms could effectively handle the obtained disparity maps. This work uses the consistency check method to find an accurate depth map for identifying occluded pixels. The prediction of the disparity map by semi-global block matching has used the benchmark dataset of Middlebury stereo for evaluation. The improved depth map quality within a… More >

Yigang Wang¹, Hong Li¹, Wanbin Pan^1,*, Weijuan Cao¹, Jie Miao¹, Xiaofei Ai¹, Enya Shen²

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.1, pp. 859-878, 2023, DOI:10.32604/cmes.2023.027320

Abstract Kinematic semantics is often an important content of a CAD model (it refers to a single part/solid model in this work) in many applications, but it is usually not the belonging of the model, especially for the one retrieved from a common database. Especially, the effective and automatic method to reconstruct the above information for a CAD model is still rare. To address this issue, this paper proposes a smart approach to identify each assembly interface on every CAD model since the assembly interface is the fundamental but key element of reconstructing kinematic semantics. First, as the geometry of an… More >

Yanjun Zhang¹, Yongqiang He², Jingbo Zhang¹, Yaru Zhao³, Zhihua Cui^1,*, Wensheng Zhang⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.1, pp. 363-383, 2023, DOI:10.32604/cmes.2023.025832

Abstract The video compression sensing method based on multi hypothesis has attracted extensive attention in the research of video codec with limited resources. However, the formation of high-quality prediction blocks in the multi hypothesis prediction stage is a challenging task. To resolve this problem, this paper constructs a novel compressed sensing-based high-quality adaptive video reconstruction optimization method. It mainly includes the optimization of prediction blocks (OPBS), the selection of search windows and the use of neighborhood information. Specifically, the OPBS consists of two parts: the selection of blocks and the optimization of prediction blocks. We combine the high-quality optimization reconstruction of… More >

Hua Li^1,*, Yuchen Yue², Jianhua Luo³

Journal of Information Hiding and Privacy Protection, Vol.4, No.2, pp. 61-68, 2022, DOI:10.32604/jihpp.2022.027692

Abstract In this paper, a video compressed sensing reconstruction algorithm based on multidimensional reference frames is proposed using the sparse characteristics of video signals in different sparse representation domains. First, the overall structure of the proposed video compressed sensing algorithm is introduced in this paper. The paper adopts a multi-reference frame bidirectional prediction hypothesis optimization algorithm. Then, the paper proposes a reconstruction method for CS frames at the re-decoding end. In addition to using key frames of each GOP reconstructed in the time domain as reference frames for reconstructing CS frames, half-pixel reference frames and scaled reference frames in the pixel… More >

Quan Yan¹, Yunfan Ye¹, Jing Xia¹, Zhiping Cai^1,*, Zhilin Wang², Qiang Ni³

Intelligent Automation & Soft Computing, Vol.36, No.3, pp. 2545-2558, 2023, DOI:10.32604/iasc.2023.029857

Abstract Computed tomography has made significant advances since its introduction in the early 1970s, where researchers have mainly focused on the quality of image reconstruction in the early stage. However, radiation exposure poses a health risk, prompting the demand of the lowest possible dose when carrying out CT examinations. To acquire high-quality reconstruction images with low dose radiation, CT reconstruction techniques have evolved from conventional reconstruction such as analytical and iterative reconstruction, to reconstruction methods based on artificial intelligence (AI). All these efforts are devoted to constructing high-quality images using only low doses with fast reconstruction speed. In particular, conventional reconstruction… More >

Sunyoung Bu¹, Suwon Lee^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.3, pp. 3083-3096, 2023, DOI:10.32604/cmes.2023.024460

Abstract Reconstructing a three-dimensional (3D) environment is an indispensable technique to make augmented reality and augmented virtuality feasible. A Kinect device is an efficient tool for reconstructing 3D environments, and using multiple Kinect devices enables the enhancement of reconstruction density and expansion of virtual spaces. To employ multiple devices simultaneously, Kinect devices need to be calibrated with respect to each other. There are several schemes available that calibrate 3D images generated from multiple Kinect devices, including the marker detection method. In this study, we introduce a markerless calibration technique for Azure Kinect devices that avoids the drawbacks of marker detection, which… More > Graphic Abstract

Yuanyuan Wang^1,*, Rui Wang², Xiaofeng Ren³, Junan Lei²

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.2, pp. 1951-1972, 2023, DOI:10.32604/cmes.2023.026112

Abstract The dense and accurate measurement of 3D texture is helpful in evaluating the pavement function. To form dense mandatory constraints and improve matching accuracy, the traditional binocular reconstruction technology was improved threefold. First, a single moving laser line was introduced to carry out global scanning constraints on the target, which would well overcome the difficulty of installing and recognizing excessive laser lines. Second, four kinds of improved algorithms, namely, disparity replacement, superposition synthesis, subregion segmentation, and subregion segmentation centroid enhancement, were established based on different constraint mechanism. Last, the improved binocular reconstruction test device was developed to realize the dual… More >