G. Fitzgerald¹, G. Goldbeck-Wood², P. Kung¹, M. Petersen¹, L. Subramanian¹, J. Wescott²

CMES-Computer Modeling in Engineering & Sciences, Vol.24, No.2&3, pp. 169-184, 2008, DOI:10.3970/cmes.2008.024.169

Abstract Molecular modeling has established itself as an important component of applied research in areas such as drug discovery, catalysis, and polymers. Algorithmic improvements to these methods coupled with the increasing speed of computational hardware are making it possible to perform predictive modeling on ever larger systems. Methods are now available that are capable of modeling hundreds of thousands of atoms, and the results can have a significant impact on real-world engineering problems. The article reviews some of the modeling methods currently in use; provides illustrative examples of applications to challenges in sensors, fuel cells, and nanocomposites; and finally discusses prospects… More >

L.N. Gergidis, D. Kourounis, S. Mavratzas, A. Charalambopoulos¹

CMES-Computer Modeling in Engineering & Sciences, Vol.21, No.2, pp. 157-176, 2007, DOI:10.3970/cmes.2007.021.157

Abstract A new complete set of scattering eigensolutions of Helmholtz equation in spheroidal geometry is constructed in this paper. It is based on the extension to exterior boundary value problems of the well known Vekua transformation pair, which connects the kernels of Laplace and Helmholtz operators. The derivation of this set is purely analytic. It avoids the implication of the spheroidal wave functions along with their accompanying numerical deficiencies. Using this novel set of eigensolutions, we solve the acoustic scattering problem from a soft acoustic spheroidal scatterer, by expanding the scattered field in terms of it. Two approaches concerning the determination… More >

S. Chen^1,2, Y. Liu^1,3, B.C. Khoo⁴, X.J. Fan⁵, J.T. Fan⁶

CMES-Computer Modeling in Engineering & Sciences, Vol.19, No.3, pp. 181-196, 2007, DOI:10.3970/cmes.2007.019.181

Abstract The mesoscopic simulation for fluids flow in a square microchannel is investigated using dissipative particle dynamics. The velocity distribution for single fluid in a square channel is compared with the solutions of CFD solver, which is found to be in good agreement with each other. The no-slip boundary condition could be well held for the repulsive coefficient ranged from 9.68 to 18.0. For the same range of repulsive coefficient, various wettabilities could be obtained by changing the repulsive coefficient for binary immiscible fluids, in which the immiscible fluids are achieved by increasing the repulsive force between species. The typical motion… More >

T. Chekifi^1,2,*, B. Dennai², R. Khelfaoui²

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.3, pp. 201-212, 2018, DOI: 10.3970/fdmp.2018.00322

Abstract The fluidic oscillator is an interesting device developed for passive flow measurement. These microsystems can produce a high oscillating jet frequency with high flow velocity. The main advantages of fluidic oscillators are that no moving parts is included in the device. Commercial CFD code FLUENT was used to perform analysis of flows in fluidic oscillator. Numerical simulations were carried out for different flow conditions, where water and air were used as working fluids. The oscillation frequencies were identified by the discrete fast Fourier transform method (FFT). Furthermore a low-pressure vortex of fluid flow in the oscillating chamber was observed. The… More >

F. Iachachene¹, A. Matoui², Y. Halouane¹

FDMP-Fluid Dynamics & Materials Processing, Vol.10, No.4, pp. 503-520, 2014, DOI:10.3970/fdmp.2014.010.503

Abstract Computations related to a heat transfer and fluid flow of a plane isothermal fully developed turbulent plane jet flowing into a rectangular hot cavity are reported in this paper. Both velocity and temperature distributions are computed by solving the two-dimensional Unsteady Reynolds Averaged Navier--Stokes (URANS) equations. This approach relies on one point statistical modeling based on the energy - specific dissipation (k-ω) turbulence model. The numerical simulations are carried out in the framework of a finite volume method. This problem is relevant to a wide range of practical applications including forced convection and the ventilation of mines, enclosure or corridors.… More >

D.V. Jayalakshmamma¹, Dinesh P.A.², M. Sankar³, D.V. Ch,rashekhar⁴

FDMP-Fluid Dynamics & Materials Processing, Vol.10, No.3, pp. 343-357, 2014, DOI:10.3970/fdmp.2014.010.343

Abstract We examine the motion of the two concentric immiscible liquid spheres with different viscosities in an electrically conducting fluid in the presence of transverse magnetic field. The inner sphere is assumed to move at a constant velocity. The Stoke’s equation along with the Lorentz force is considered to model the resulting fluid flow, analytical solutions being obtained by the similarity solution method in terms of modified Bessel’s functions. Streamlines related to the fluid circulation in the annulus between the two liquid spheres and inside the inner liquid sphere are presented for different combinations of the governing non-dimensional parameters. More >

Carole Planchette¹, Elise Lorenceau¹, Günter Brenn²

FDMP-Fluid Dynamics & Materials Processing, Vol.7, No.3, pp. 279-302, 2011, DOI:10.3970/fdmp.2011.007.279

Abstract This work is dedicated to a general description of collisions between two drops of immiscible liquids. Our approach is mainly experimental and allows us to describe the outcomes of such collisions according to a set of relevant parameters. Varying the relative velocity U as well as the impact parameter X we can build for each pair of investigated liquids a nomogram X,U showing three possible regimes: coalescence, head-on separation and off-center separation. In this paper, we also study the influence of the liquid properties, i.e. viscosity, density, surface and interfacial tensions using a set of aqueous glycerol solutions together with… More >

S. Homma¹, M. Yokotsuka¹, T. Tanaka¹, K. Moriguchi¹, J. Koga¹, G. Tryggvason²

FDMP-Fluid Dynamics & Materials Processing, Vol.7, No.3, pp. 231-240, 2011, DOI:10.3970/fdmp.2011.007.231

Abstract We develop a three-fluid front-tracking method in order to simulate the motion of an axisymmetry compound droplet, which consists of three immiscible fluids separated by two different interfaces. The two interfaces of the compound droplet are represented by two different sets of the front-tracking elements immersed on the Eulerian grid mesh, where the velocities and the pressure are calculated. The density and viscosity profiles with jumps at the interfaces are successfully determined from the location and the connection information of the front-tracking elements. The motion of a compound droplet is simulated on axisymmetric cylindrical coordinates. The results show that the… More >

Shaligram Tiwari¹, Koichi Nishino²

FDMP-Fluid Dynamics & Materials Processing, Vol.6, No.1, pp. 109-136, 2010, DOI:10.3970/fdmp.2010.006.109

Abstract The present work reports about an experimental study investigating the influence of air convection and of ambient temperature around a half-floating zone on the transition behavior from steady to oscillatory flow, i.e. the influence on the critical Marangoni number (Macr). Increase of heat loss from the free surface of the half-floating zone or liquid bridge by increased convection and ambient cooling decreases Macr. Heat input to the free surface increases Macr. An add-on numerical simulation of the air convection around the zone clarifies the influence of air convection and the ambient temperature on the temperature, surface velocity and local Biot… More >

I. Ueno¹, A. Kawazoe², H. Enomoto³

FDMP-Fluid Dynamics & Materials Processing, Vol.6, No.1, pp. 99-108, 2010, DOI:10.3970/fdmp.2010.006.099

Abstract The authors focus on thermocapillary-driven flow in a half-zone liquid bridge and its transition from two-dimensional steady flow to three-dimensional oscillatory one under an effect of forced convection in ambient gas region around the liquid bridge. The liquid bridge is settled in a cylindrical 'external shield,' in which upward/downward forced flow of the ambient gas is added. The critical condition of the flow transition in the 2-cSt silicone-oil liquid bridge is examined as functions of the aspect ratio and the volume ratio of the liquid bridge, and averaged velocity of the ambient gas. The authors indicate a significant effect of… More >