Suyadi Kartorono^*, Herlien Dwiarti Setio, Adang Surahman, Ediansjah Zulkifli

Structural Durability & Health Monitoring, Vol.17, No.3, pp. 195-208, 2023, DOI:10.32604/sdhm.2022.023259

Abstract This paper sums up the determining analysis of the measuring location of T_refl using a thermocouple during the thermography tests. Laboratory temperature distribution testing methods, analysis of value and location of T_refl measurement are explained in this paper. The heat source is two halogen lamps of 500 watts each fitted at a distance of 30–50 cm. Noises appearing during testing of thermography are corrected with measured T_refl value. The results of thermogram correction of corroded concrete surfaces using T_refl values are displayed in this paper too. The concrete surface temperature results of quantitative image processing method are compared to the… More >

Y.S. Chen, Y.H. Huang, B. Yeung, L. Liu, Y.Y. Hung

The International Conference on Computational & Experimental Engineering and Sciences, Vol.20, No.1, pp. 21-22, 2011, DOI:10.3970/icces.2011.020.021

Abstract Active thermography is an optical-based non-contact inspection method for full-field and quantitative measurement of surface radiation to predict potential faults or inner structure of a test object. The mechanism of the active thermography inspection is to excite the test object using appropriate thermal excitation methods and measure the corresponding thermal response. Active thermography conducts testing in a more controllable way and offer more reliable results compared to passive thermography. This paper reports the development of integrated systems featured some advanced excitation methods and thermal image processing methods. Experiments have been conducted on samples with disbonds, delaminations, internal cracks or voids,… More >