Pronob Gogoi, Dhaneswar Das, Shyamalima Sharma, Swapan K. Dolui^*

Journal of Renewable Materials, Vol.3, No.2, pp. 151-159, 2015, DOI:10.7569/JRM.2014.634129

Abstract Alkyd resins based on Jatropha curcas oil with different molar ratios of phthalic anhydride (PA) and maleic anhydride (MA) were prepared by alcoholysis followed by polyesterifi cation reaction. The progress of the reaction was traced by the determination of acid value at regular time intervals. From the kinetic study the extent of the reaction was found in the range of 52.4–61.2%. The prepared resins were blended with a commercially available fast-curing epoxy resin in order to improve the properties like curing time, chemical resistance, tensile strength, and thermal stability. The morphology study of the blends showed good compatibility of alkyd… More >

Dafni Foti¹, Costas Passialis¹, Elias Voulgaridis¹, Stergios Adamopoulos^2,*

Journal of Renewable Materials, Vol.9, No.1, pp. 85-96, 2021, DOI:10.32604/jrm.2021.011868

Abstract Recycled polystyrene in combination with paraffin wax, alkyd resin, and gum rosin were used as components in formulations to investigate their water repellency when applied to cellulosic filter paper substrates. Polystyrene was used in concentration of 5, 10, 15 and 20%, alkyd resin and gum rosin of 5% each and paraffin wax of 0.5%. Totally, twenty four water repellent solutions were prepared. Water repellency was evaluated in terms of water absorption of the cellulosic fibrous mats. The relations between retention of solid substances of the formulations and grammage and water absorption of filter paper samples were also determined. The results… More >

Hassen Mohamed Sbihi^1,*, Hamid Shaikh², Lahssen El Blidi², Imed Arbi Nehdi¹, Ubair Abdus Samad², Moufida Romdhani-Younes³, Saud Ibrahim Al-Resayes¹

Journal of Renewable Materials, Vol.6, No.6, pp. 651-661, 2018, DOI:10.7569/JRM.2018.634105

Abstract In this study, different samples of alkyd resins based on Citrullus colocynthis seed oil (CCSO)—which has a high content of linoleic acid—were prepared as a renewable raw material. Short (I), medium (II), and long (III) alkyd resins were synthesized using oil, glycerol, and phthalic anhydride (PA) in different proportions. Prunus mahaleb seed oil (PMSO), which contains conjugated linolenic acid, was blended with CCSO in different proportions to examine the effect of PMSO on the film properties of alkyd resins (IV and V). All synthesized resins were characterized by FTIR and 1H NMR spectroscopic analysis. These resins were also cured by… More >