Pranab Kumar Mondal^*, Sanchayan Mukherjee

Frontiers in Heat and Mass Transfer, Vol.3, No.3, pp. 1-6, 2012, DOI:10.5098/hmt.v3.3.3004

Abstract The present paper deals with the analytical investigation for the limiting value of Nusselt number, including the effect of viscous dissipation on heat transfer for a laminar shear driven flow between two infinite parallel plates, where the bottom plate is fixed and the top plate is moving in an axial direction at a constant speed. The study concentrates on hydro-dynamically fully developed flow of a Newtonian fluid of constant properties without considering the axial conduction in the fluid. To investigate the effect of viscous dissipation on heat transfer by defining the limiting Nusselt number, plates are kept at constant equal… More >

Cheng Wang^1,2,*, Zhuowei Zheng¹

CMES-Computer Modeling in Engineering & Sciences, Vol.138, No.2, pp. 1563-1592, 2024, DOI:10.32604/cmes.2023.031103

Abstract The advent of Industry 4.0 has compelled businesses to adopt digital approaches that combine software to enhance production efficiency. In this rapidly evolving market, software development is an ongoing process that must be tailored to meet the dynamic needs of enterprises. However, internal research and development can be prohibitively expensive, driving many enterprises to outsource software development and upgrades to external service providers. This paper presents a software upgrade outsourcing model for enterprises and service providers that accounts for the impact of market fluctuations on software adaptability. To mitigate the risk of adverse selection due to asymmetric information about the… More >

Liang Zhang^1,*, Zigang He¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09713

Abstract The different elastic properties of tension and compression are obvious in many engineering materials, especially new materials. Materials with this characteristic, such as graphite, ceramics, and composite materials, are called bi-modulus materials. Their mechanical properties such as Young’s modulus have randomness in tension and compression due to different porosity, microstructure, etc. To calibrate the mechanical properties of bi-modulus materials by bridging FEM simulation results and scarce experimental data, the paper presents a data-fusion computational method. The FEM simulation is implemented based on Parametric Variational Principle (PVP), while the experimental result is obtained by Digital Image Correlation (DIC) technology. To deal… More >

Xueling Fan^1,*, Pin Lu¹, Xiaochao Jin¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09919

Abstract Ni-based single crystal superalloys have been favored in the high-temperature service zones of aeroengine and gas turbine due to its excellent mechanical properties at high temperature. It is very significant to construct a constitutive model that can accurately capture the mechanical response of Ni-based single crystals for simulation analysis. In this work, a forest dislocation density-based single crystal plasticity constitutive model was developed to capture the mechanical behavior of Ni-based single crystals, including the temperature dependent anomalous yield and tension/compression asymmetry. Firstly, thermally activated cross-slip mechanism was introduced into the hardening model to describe the anomalous yield response. Secondly, the… More >

Ali Chaieb, Noamen Rebai

Revue Internationale de Géomatique, Vol.29, No.3, pp. 287-296, 2019, DOI:10.3166/rig.2019.00082

Abstract The geomorphology of the Htab river watershed is mainly guided by the action of the E-W Kasserine fault. This activity influenced the installed hydrographic system. To see the impact of neotectonic on the Htab river watershed, four morphometric indices were applied: the elongation ratio, the hypsometric curve, the hypsometric integral, and the asymmetry factor. The processing and calculation of these indices were based on global DEMs (Digital Elevation Models). The result obtained shows an important link between the activity of the Kasserine fault, the geomorphological behavior of the Htab river watershed and the hydrographic network. Field observations confirmed well these… More >

Aisha Fayomi¹, Christophe Chesneau^2,*, Farrukh Jamal³, Ali Algarni¹

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.3, pp. 2371-2403, 2023, DOI:10.32604/cmes.2023.027000

Abstract In this article, we highlight a new three-parameter heavy-tailed lifetime distribution that aims to extend the modeling possibilities of the Lomax distribution. It is called the extended Lomax distribution. The considered distribution naturally appears as the distribution of a transformation of a random variable following the logweighted power distribution recently introduced for percentage or proportion data analysis purposes. As a result, its cumulative distribution has the same functional basis as that of the Lomax distribution, but with a novel special logarithmic term depending on several parameters. The modulation of this logarithmic term reveals new types of asymetrical shapes, implying a… More >

Elena Panaioli^1,2,3,#, Duarte Martins^1,4,#, Marc Antoine Isorni⁵, Diala Khraiche¹, Antoine Legendre¹, Nathalie Boddaert⁶, Damien Bonnet¹, Filippo Crea^2,3, Francesca Raimondi^1,6,7,8,*

Congenital Heart Disease, Vol.17, No.2, pp. 117-128, 2022, DOI:10.32604/chd.2022.018779

Abstract Background: Repaired Tetralogy of Fallot (rTOF) patients may have residual lesions such as main (MPA) and branch pulmonary artery stenosis (BPAS). While MPA stenosis is well studied, few data are available on BPAS in rTOF. We aimed to describe pulmonary perfusion in a large paediatric cohort of rTOF and its impact on right ventricular and outflow-tract hemodynamics using 4D flow CMR. Methods: 130 consecutive patients (mean age at CMR 14.3 ± 4.6 years) were retrospectively reviewed. 96 patients had transannular patch without valve preservation while 34 patients had conserved annulus or valved conduit. A pulmonary blood flow ratio (right pulmonary artery (RPA)/left… More > Graphic Abstract

Yuanyuan Liu, Zhen Li, Lie Xu, Qiang Fu^*, Yongjian Wang

Phyton-International Journal of Experimental Botany, Vol.91, No.1, pp. 115-128, 2022, DOI:10.32604/phyton.2022.015395

Abstract A key scientific challenge relating to the threat of invasive plants on agriculture at the region level is to understand their adaptation and evolution in functional traits. Leaf functional traits, related to growth and resource utilization, might lead to adaptation of invasive plants to the geographical barriers (region or elevation). In the field experiment, we discussed the effects of region and elevation on leaf functional traits on invasive plant Erigeron annuus in farmland habitats in China. We compared leaf size, coefficient of variation (CV) of leaf traits, and fluctuating asymmetry (FA) of E. annuus from three regions (east vs. center… More >

Qixue Guan^*, Yueqiu Jiang

Intelligent Automation & Soft Computing, Vol.26, No.4, pp. 773-781, 2020, DOI:10.32604/iasc.2020.010112

Abstract It is known that congestion in the reverse direction happens in advance of the congestion in the forward direction due to the significant bandwidth asymmetry in the two directions of the space networks, especially in the satellite networks, which enables the TCP Vegas to enter the phase of the congestion avoidance blindly and reduce the throughput of the forward direction. To solve this problem, a congestion control model, TCP Vegas-DDA, which maintains the frequency of the acknowledgments in the reverse direction is proposed. The model sets the interval time between acknowledgments dynamically based on the variation of the queuing delay… More >

Jie Li^1,2, Yuehua Feng^1,3,*, Jinfeng Peng¹, Xiaoke Wang¹, Dinghua Yang², Guiling Xu¹

Phyton-International Journal of Experimental Botany, Vol.89, No.3, pp. 657-666, 2020, DOI:10.32604/phyton.2020.010969

Abstract Rice leaves show lateral asymmetry. Differences in width, thickness, chlorophyll meter readings, nitrogen content, density, and yield on each asymmetrical have been reported. However, limited information is available on the distribution characteristics of the smooth side (SS) and rough side (RS) of rice leaves. The SS of rice leaves can be divided into two types according to its location in leaf: one is the smooth side appearing on the left (SSAL) of the leaf, while the smooth side of the other type appears on the right (SSAR). Through the investigation of four rice varieties, we identified that the proportion of… More >