Zhijie Fan¹, Huaxin Liu¹, Genjin Liu^2,*, Xuezhi Wang¹, Wenqi Cui¹

Journal of Renewable Materials, Vol.11, No.4, pp. 1763-1791, 2023, DOI:10.32604/jrm.2023.024319

Abstract The development of recycled aggregate concrete (RAC) provides a new approach to limiting the waste of natural resources. In the present study, the mechanical properties and deformability of RACs were improved by adding basalt fibers (BFs) and using external restraints, such as a fiber-reinforced polymer (FRP) jacket or a PVC pipe. Samples were tested under axial compression. The results showed that RAC (50% replacement of aggregate) containing 0.2% BFs had the best mechanical properties. Using either BFs or PVC reinforcement had a slight effect on the loadbearing capacity and mode of failure. With different levels of BFs, the compressive strengths… More > Graphic Abstract

Yun Zhao, Shi Yan^*, Jiale Jia

CMES-Computer Modeling in Engineering & Sciences, Vol.126, No.3, pp. 1251-1274, 2021, DOI:10.32604/cmes.2021.013478

Abstract In this study, the pyramidal lattice stitched foam sandwich composite materials were manufactured by integrating top and bottom panels with pyramidal lattice core to overcome the weak interface between the core and the skins of the sandwich structure. The influence of the reinforcing core rods on the mechanical properties including compressive, shear, and three-point bending performances of the foam sandwich composite materials were revealed through theoretical analysis and comparative experiments. The theoretical predictions were consistent with the experimental results. Compressive test, shear test and three-point bending test were performed. The experimental results show that the core rods can significantly improve… More >